HIGHLIGHTS

Comprehensive measurement and debug solution

  • Characterizes 200/400 Gb/s TX designs defined by IEEE 802.3bs
  • Characterizes 50/100/200 Gb/s TX designs defined by IEEE 802.3cd
  • Performs nearly 300 tests
  • Key measurements include 12-edge Output Jitter (Jnu, JRMS, EOJ), SNDR, SNR_ISI, eye-opening (EW5, EH5), and return loss

Flexible and extensible

  • Operate on an N1000A/86100D DCA-X oscilloscope, or on a PC connected to an N109x DCA-M via USB
  • Automatic HTML report generation
  • Test all or selected parameters to compliance limits or custom limits

Compatibility

  • N1000A DCA-X Mainframe
  • 86100D DCA-X Mainframe
  • N109X DCA-M Oscilloscope
  • N107X Clock Recovery

The Keysight N1091BSCB TX test application can be used with the N1000A/86100D DCA-X or N109X DCA-M Series oscilloscopes to quickly and accurately perform NRZ and PAM4 measurements according to:

  • IEEE 802.3bs 200 Gb/s and 400 Gb/s Operation

    • 200GAUI-x and 400GAUI-x Chip-to-Chip (C2C) TX characteristics
    • 200GAUI-x and 400GAUI-x Chip-to-Module (C2M) host/module output characteristics
  • IEEE 802.3cd 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation

    • Transmitter characteristics: 50GBASE-CR, 100GBASE-CR2, and 200GBASE-CR4
    • Transmitter characteristics: 50GBASE-KR, 100GBASE-KR2, and 200GBASE-KR4
    • LAUI-2 Chip-to-Chip (C2C) TX characteristics
    • LAUI-2 Chip-to-Module (C2M) host/module output characteristics
    • 50GAUI-x and 100GAUI-x Chip-to-Chip (C2C) TX characteristics
    • 50GAUI-x and 100GAUI-x Chip-to-Module (C2M) host/module output characteristics

The N1091BSCB is an easy-to-use TX test application that:

  • Saves time in understanding details of standards
  • Reduces the time it takes to characterize your PAM4 and NRZ design from hours to minutes
  • Helps debug your device using custom configurations
  • Allows you to quickly generate HTML reports that summarize the performance of your device

Key measurements include:

  • Jitter Measurements including Jnu, JRMS, and EOJ on “12-edges” of a PRBS13Q
  • Output Waveform measurements including Steady-State Voltage (Vf), Linear Fit Pulse Peak and Signal-to-Noise-and-Distortion (SNDR)
  • Transition Time
  • Eye Width (EW5) and Eye Height (EH5)
  • Return Loss

For a comprehensive and up-to-date list of specific tests covered by the application, download and install the N1091BSCB .exe onto a PC (click the Trials and Licenses tab), and run the application in “Demo Mode”. No license (or hardware) is required to run the software application in “Demo Mode”.

Free Trials

N1091BSCB TX Test Application Software and 30-Day Trial License

Keysight N1091BSCB Electrical TX Test SW for IEEE 802.3bs/cd is used with the N1000A/86100D DCA-X family and N109X DCA-M oscilloscopes.

Extend the capabilities for your Electrical TX Test SW for IEEE 802.3bs/cd (50/100/200/400 Gb/s)

Want help or have questions?