N7814A X-Series Signal Analyzer Calibration Application

Keysight empfiehlt die Verwendung der aktuellen Version, die die neuesten verfügbaren Fehlerbehebungen und Sicherheitspatches enthält.
Veröffentlichungsdatum Version Versionsbeschreibung
2026-07-07 E.28.08 Added support for 11713D and 11713E attenuator/switch driver - Updated the adjustment limit of the N9000A/B 50MHz Calibrator Amplitude Adjustment - Added a connection check to detect if the PNA-X 10 MHz external reference is not connected during the calibration - Added IF Frequency Response Full Bypass Path adjustment for N9030B with options >526 - Fixed the TME database corruption issue during the installation - Fixed the cal file location of the LO Output Power Option EXM adjustment for N9021B - Fixed the result and the issue that prompted a warning showing that the N1914B is not a valid power meter in the following tests: Total Amplitude Accuracy 50 GHz to 75 GHz Total Amplitude Accuracy Above 75 GHz - Fixed the error when the Gain Compression was enabled for N9021B - Fixed the measurement misalignment issue in the Freq Response Above 3.6 GHz Preamp Off test (at the Microwave Preselector Bypass (MPB) path) after running the adjustments - Fixed the issue when the error message "Illegal Parameter Value; This model is always DC coupled" when running the Frequency Span Accuracy or TOI test on the N9041B - Updated TOI test to connect the power sensors (for below 26.5 GHz and above 26.5 GHz) to the difference channel of the power meter - Added 3458A internal temperature checking for all tests that use a 3458A. A warning is prompted if the temperature difference is greater than expected. - Updated the report template to use the new calibration standards. Remove “Undetermined” result type and replace with Passed ‡ / Failed ‡.
Veröffentlichungsdatum Version
2026-07-07 E.28.08
Version Description
Added support for 11713D and 11713E attenuator/switch driver - Updated the adjustment limit of the N9000A/B 50MHz Calibrator Amplitude Adjustment - Added a connection check to detect if the PNA-X 10 MHz external reference is not connected during the calibration - Added IF Frequency Response Full Bypass Path adjustment for N9030B with options >526 - Fixed the TME database corruption issue during the installation - Fixed the cal file location of the LO Output Power Option EXM adjustment for N9021B - Fixed the result and the issue that prompted a warning showing that the N1914B is not a valid power meter in the following tests: Total Amplitude Accuracy 50 GHz to 75 GHz Total Amplitude Accuracy Above 75 GHz - Fixed the error when the Gain Compression was enabled for N9021B - Fixed the measurement misalignment issue in the Freq Response Above 3.6 GHz Preamp Off test (at the Microwave Preselector Bypass (MPB) path) after running the adjustments - Fixed the issue when the error message "Illegal Parameter Value; This model is always DC coupled" when running the Frequency Span Accuracy or TOI test on the N9041B - Updated TOI test to connect the power sensors (for below 26.5 GHz and above 26.5 GHz) to the difference channel of the power meter - Added 3458A internal temperature checking for all tests that use a 3458A. A warning is prompted if the temperature difference is greater than expected. - Updated the report template to use the new calibration standards. Remove “Undetermined” result type and replace with Passed ‡ / Failed ‡.

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • N9000A/B, N9010A/B/N, N9020A/B, N9030A/B, N9040B, N9041B, N9021B, N8973B, N8974B, N8975B, N8976B, SPN9003A and SPN9026A,

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • N9000A/B, N9010A/B/N, N9020A/B, N9030A/B, N9040B, N9041B, N9021B, N8973B, N8974B, N8975B, N8976B, SPN9003A and SPN9026A,

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • N9000A/B, N9010A/B/N, N9020A/B, N9030A/B, N9040B, N9041B, N9021B, N8973B, N8974B, N8975B, N8976B, SPN9003A and SPN9026A,

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • N9000A/B, N9010A/B/N, N9020A/B, N9030A/B, N9040B, N9041B, N9021B, N8973B, N8974B, N8975B, N8976B, SPN9003A and SPN9026A,

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • N9000A/B, N9010A/B/N, N9020A/B, N9030A/B, N9040B, N9041B, N9021B, N8973B, N8974B, N8975B, N8976B, SPN9003A and SPN9026A,

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • N9000A/B, N9010A/B/N, N9020A/B, N9030A/B, N9040B, N9041B, N9021B, N8973B, N8974B, N8975B, N8976B, SPN9003A and SPN9026A,

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • N9000A/B, N9010A/B/N, N9020A/B, N9030A/B, N9040B, N9041B, N9021B, N8973B, N8974B, N8975B, N8976B, SPN9003A and SPN9026A,

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • N9000A/B, N9010A/B/N, N9020A/B, N9030A/B, N9040B, N9041B, N9021B, N8973B, N8974B, N8975B, N8976B, SPN9003A and SPN9026A,

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • N9000A/B, N9010A/B/N, N9020A/B, N9030A/B, N9040B, N9041B, N9021B, N8973B, N8974B, N8975B, N8976B, SPN9003A and SPN9026A,

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • N9000A/B, N9010A/B/N, N9020A/B, N9030A/B, N9040B, N9041B, N9021B, N8973B, N8974B, N8975B, N8976B, SPN9003A and SPN9026A,

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • N9000A/B, N9010A/B/N, N9020A/B, N9030A/B, N9040B, N9041B, N9021B, N8973B, N8974B, N8975B, N8976B, SPN9003A and SPN9026A
SHOW MORE