검색 결과 페이지입니다. . 추천 검색 결과 보기:

주요 특징

  • InfiniiMode
  • 모든 InfiniiMax III/III+ 액세서리 및 새로운 QuickTip 헤드와 호환
  • 보다 정확한 AC 수정을 위해 “측정된” S-파라미터와 함께 로드되는 프로브 앰프
  • Infiniium 90000X/Q 및 V-시리즈 오실로스코프에 직접 연결(소프트웨어 버전 5.50 이상 필요)

대역폭을 개선한 N7002A InfiniiMax III+ 16 GHz 프로브 앰프는 범용의 고속 차동 버스 프로빙에 사용됩니다.

키사이트의 InfiniiMax III+ 프로브는 차동 신호의 모든 구성 요소를 측정할 수 있도록 프로브의 측정 능력과 유용성을 크게 확대한 InfiniiMode 기술을 제공합니다. 엔지니어들은 하나의 연결로 차동 신호, 싱글 엔드 A 또는 B 신호, 차동 신호의 공통 모드 구성 요소를 측정하도록 InfiniiMax III+를 설정할 수 있습니다.

InfiniiMax III 기술처럼 각 개별 InfiniiMax III+ 프로브 앰프는 고유한 S-파라미터를 포함하며 이 주파수 응답 데이터가 다양한 프로브 헤드의 S-파라미터와 함께 사용되어 프로브의 진폭 및 위상 응답을 더 평탄화해 정확도를 높여줍니다. 특정 프로브 앰프의 응답 결과를 수정할 수 있어 프로브 수정이 더 정확해지므로 더 정확한 측정이 가능합니다.

역량 확대

액세서리
모든 액세서리 보기

특집 리소스: N7002A InfiniiMax III+ 시리즈 프로브 앰프, 16 GHz

Application Notes 2021.09.12

Demystifying RCRC and RC Probe

Demystifying RCRC and RC Probe

This paper discusses the advantages of RCRC probes over standard RC probes. It covers input impedance characteristics, and how probe input impedance affects measurements.

2021.09.12

Application Notes 2018.06.20

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Keysight InfiniiMax differential probes are DSP corrected to have a flat magnitude and phase response to provide the highest possible accuracy. The bandwidth chosen to correct to is typically around 3dB non-corrected bandwidth. Usually, extending the bandwidth much beyond that point will increase the noise floor, and if pushed even further, can cause unrealistic noise artifacts. This application note presents the techniques used to extend the bandwidth performance of the InfiniiMax 1169A/B and the N5381A/B solder-in head using the PrecisionProbe application on Infiniium realtime oscilloscope.

2018.06.20

Application Notes 2023.03.12

Probe Soldering Guidelines for Keysight InfiniiMax Probes

Probe Soldering Guidelines for Keysight InfiniiMax Probes

There are various ways to connect test instrumentation probes to devices under test (DUTs). One such method is soldering, which provides a reliable connection and minimizes parasitic probing effects by keeping wire lengths and connections as short as possible. Many of Keysight’s high performance oscilloscope probes utilize soldered connections. As probes and devices continue to shrink, using the correct tools and soldering skills becomes even more critical in order to avoid damage and connectivity issues. This guide provides helpful tips, recommended tools, and techniques specific to Keysight probes to help test engineers make the most out of their soldered-in probes and connections.

2023.03.12

Quick Start Guides 2019.01.21

Quick Reference Card for Keysight N7000/1/2/3A InfiniiMax III+ Probes

Quick Reference Card for Keysight N7000/1/2/3A InfiniiMax III+ Probes

This card quickly describes how to use the InfiniiMax III+ probes and compatible browsers and probe heads.

2019.01.21

User Manuals 2015.01.31

Handling Guide for Keysight N7000/1/2/3A InfiniiMax III+ Probes

Handling Guide for Keysight N7000/1/2/3A InfiniiMax III+ Probes

This guide assists you in properly handling your InfiniiMax III+ N7000/1/2/3A probes to prevent damage and maintain high performance.

2015.01.31

Data Sheets 2024.04.20

Infiniium Oscilloscope Probes and Accessories

Infiniium Oscilloscope Probes and Accessories

To get the most out of your Keysight Infiniium oscilloscope, you need the right probes and accessories for your particular applications. Whether you need the high bandwidth and low loading of an active probe, an easy way to connect to surface mount ICs, or a passive probe to measure high voltages, there’s a wide selection of high-quality probes and accessories for your Infiniium oscilloscope. The Infiniium probes and accessories data sheet provides you the overview of all probes and accessories recommended for Infiniium oscilloscopes.

2024.04.20

Data Sheets 2024.02.07

InfiniiMax RCRC Probing System

InfiniiMax RCRC Probing System

The new InfiniiMax 4 series probing system is a groundbreaking solution designed to deliver unparalleled signal fidelity and accuracy with bandwidth capabilities reaching up to 52 GHz, all while maintaining exceptionally low loading. With the InfiniiMax III/III+ probe amplifiers, this advanced InfiniiMax RCRC probe system ensures swift and reliable measurements ranging from 8 GHz to 52 GHz, setting a new standard in probing technology.

2024.02.07

User Manuals 2023.02.09

N2830/1/2A and N7000/1/2/3A InfiniiMax III+ Series Probes User Guide

N2830/1/2A and N7000/1/2/3A InfiniiMax III+ Series Probes User Guide

This guide describes how to set up, configure, and use the InfiniiMax III+ series probes.

2023.02.09

Oscilloscope Probes Selection Guide

Oscilloscope Probes Selection Guide

Keysight offers a broad range of voltage, current, and optical probing solutions for InfiniiVision and Infiniium Series oscilloscopes.
모든 리소스 보기

모든 리소스 보기

다른 도움이 필요하십니까?

키사이트에 문의하기