Choose a country or area to see content specific to your location
Enable browser cookies for improved site capabilities and performance.
Confirm your country to access relevant pricing, special offers, events, and contact information.
PRODUCTS AND SERVICES
- Spectrum Analyzers (Signal Analyzers)
- Network Analyzers
- Logic Analyzers
- Protocol Analyzers and Exercisers
- Bit Error Ratio Testers
- Noise Figure Analyzers and Noise Sources
- High-Speed Digitizers and Multichannel DAQ Solutions
- AC Power Analyzers
- DC Power Analyzers
- Materials Test Equipment
- Device Current Waveform Analyzers
- Parameter / Device Analyzers and Curve Tracers
- Generators, Sources, and Power Supplies
- Modular Instruments
- Network Test and Security
- Network Visibility
- Additional Products
- All Products, Software, Services
N9077EM1E WLAN 802.11ac / ax Measurement Application, Multi-Touch UI
- Support 802.11ac and 802.11ax 20/40/80/160 MHz and 80+80 MHz one-button standard-based measurements with pass/fail tests per the standard
- Modulation analysis: up to 8x8 MIMO EVM measurement (only available with PXIe VXT M9421A/M9410A/M9411A)
- Modulation format: QPSK, 16/32/64/128/256/1024 and 4096 QAM
- Spectrum and power measurements: channel power, SEM, OBW, CCDF, spurious emission, Power vs Time, spectral flatness
- Modulation analysis measurements: constellation diagram, EVM, EVM vs. symbol, EVM vs. subcarrier, Burst & Signal Info, User Info (802.11ax), numeric results, and Demod bits etc.
- Performance: EVM floor up to -52 dB (0.25%) (nominal); Absolute power: up to ▒ 0.19 dB (at 95th percentile)
- Support multi-touch user interface and SCPI remote interface programming
- KeysightCare software support subscription included
- Keysight supports tiered X-app models with N-models for UXA/PXA/PXE, E-models for MXA/EXA/MXE/VXT. The higher tiered X-app models can run at the lower platforms, which means N-models can run on all platforms, and E-models can only run on MXA/EXA/MXE/VXT.