N5416A provides a fast and reliable way to verify USB electrical specification compliance for USB 2.0 devices, hosts, and hubs.

HIGHLIGHTS

Automation:

  • Test setup wizard guides you through test selection, configuration, connection, execution, and results reporting
  • Measurement connection setups are displayed
  • Oscilloscope setup is automatically configured for each test
  • Test results report documents test configuration, measurements made, pass/fail status, margin analysis, and waveforms

Standards Supported:

  • USB-IF recognized for use in USB 2.0 compliance testing
  • MATLAB scripts used are from the USB-IF organization

Requirements:

  • E2649B for a complete set of six high-speed test fixtures and power supply
  • E2646A Signal Quality inrush Droop/Drop (SQiDD) for low/full speed testing

Extensibility:

  • Use the N5467A User Defined Application tool
  • Create and fully integrate custom tests, configuration variables and connection instructions.
  • Insert external application calls into the run sequence, such as MATLAB scripts or your device controller.
  • Configure additional external instruments used in your test suite.

The N5416A USB 2.0 Compliance test software makes USB signal integrity testing as simple as capturing the signals with your oscilloscope; eliminating the need to transfer scope waveforms to a PC.

NOTE: This product has a June 1, 2020 end of life and is replaced by D9010USBC

no image available

no image available