Infiniium Oscilloscope Probes and Accessories

To get the most out of your Keysight Infiniium oscilloscope, you need the right probes and accessories for your particular applications. Whether you need the high bandwidth and low loading of an active probe, an easy way to connect to surface mount ICs, or a passive probe to measure high voltages, there’s a wide selection of high-quality probes and accessories for your Infiniium oscilloscope. The Infiniium probes and accessories data sheet provides you the overview of all probes and accessories recommended for Infiniium oscilloscopes.

Infiniium MXR-Series

Keysight's Infiniium MXR-Series oscilloscopes feature fully upgradeable models ranging in performance from 500 MHz to 6 GHz, 4 or 8 analog channels, and dozens of hardware and software options.

N1000A DCA-X

Achieve clarity faster with Keysight's N1000A DCA-X oscilloscope. This scope incorporates innovative technology designed to deliver superior measurements.

Infiniium UXR-B Series Oscilloscopes

Infiniium UXR-B Series is the most advanced oscilloscope on the planet and it has up to four channels of simultaneous 110 GHz of bandwidth, each concurrently sampling at a staggering 256 GSa/s with 10 bits of high-definition analog to digital converter (ADC) resolution.

Keysight N777-C Family of Tunable Laser Sources

The Keysight Technologies N777-C Family of Tunable Laser Sources offers the full wavelength range from 1240 nm to 1650 nm with no wavelength gaps. The N777-C tunable laser sources realize the cost efficiency and performance required to test components for coarse and dense wavelength division multiplexing (CWDM, DWDM, 100GBASE-LR4) and passive optical networks (PON).

81150A and 81160A Pulse Function Arbitrary Noise Generators

The Keysight 81160A is a pulse function arbitrary noise generator with 330 MHz pulses and 500 MHz sine waves. The unique functionality of this 4-in1 instrument increases test efficiency and confidence.

Infiniium UXR-Series Oscilloscopes

The Infiniium UXR-Series oscilloscopes deliver exceptional performance, ultra-low noise, and high signal fidelity for engineers and scientists to truly see and understand the fastest phenomena – enabling you to develop the next generation of technology and research more quickly.

N778xC Polarization Test Products

The new N778xC polarization test products enable high-speed, high performance characterization and verification of optical components and sub-systems

M8195A 65 GSa/s Arbitrary Waveform Generator

Arbitrary waveform generator with the highest combination of speed, bandwidth and channel density. Flexible signal generation at up to 32 Gbaud.

Keysight XR8 Oscilloscope Spotlight

The Keysight XR8 Oscilloscope spotlight video introduces a new 33 GHz real-time oscilloscope built for next-generation digital validation. It highlights faster testing, lower noise, higher resolution, and a compact, quiet design that helps engineers overcome tight margins, long test cycles, and lab constraints.

N2790A 100 MHz, N2791A 25 MHz and N2891A 70 MHz High-Voltage Differential Probes

Oscilloscope users often need to make floating measurements where neither point of the measurement is at earth ground. Use the N2790A or N2791A high-voltage differential probe to make safe and accurate floating measurements with an oscilloscope.

M8040A High-Performance BERT 64 Gbaud Version 8.5

The M8040A BERT´s true error analysis provides repeatable and accurate results, optimizing the performance margins of your devices.

Infiniium V-Series Oscilloscopes

The Infiniium V-Series oscilloscopes deliver leading performance, ultra-low noise, and high signal fidelity for engineers and scientists to truly see and understand the fastest phenomena – enabling you to develop the next generation of technology and research more quickly.

Infiniium XR8 Oscilloscopes

This technical overview introduces XR8 as Keysight’s next-generation real-time oscilloscope platform, combining new front-end and ADC/DSP ASIC hardware innovation with the Infiniium 2026 software architecture to deliver enhanced signal integrity, accelerated multi-engine analysis performance, and scalable compliance and debug workflows for memory, USB, MIPI, and DisplayPort high-speed interface validation.

Infiniium UXR-B Series Oscilloscopes

The exceptional Keysight Infiniium UXR-B Series oscilloscopes set the standard for performance, offering incredibly low noise and superior signal fidelity. For detail specifications, please refer to the data sheet.

Keysight DCA Sampling Oscilloscopes

Explains the configuration rules and guidelines for the Keysight DCA-X, DCA-M, Clock Recovery and FlexOTO solutions.

16860A Series Portable Logic Analyzers

Keysight's 16860 Series logic analyzers deliver leading specifications in their class, offering 2.5 GHz timing capture with deep memory and 1400 MSa/s trigger sequencer.

N2750A/51A/52A InfiniiMode Differential Active Probes

The N2750A Series InfiniiMode differential probes are low-cost, 1.5 GHz, 3.5 GHz, and 6 GHz differential active probes compatible with InfiniiVision and Infiniium oscilloscopes' AutoProbe interface.

N7752C and N776-C Family of Variable Optical Attenuators

The Keysight N7752C and N776-C family of variable optical attenuators enables highly efficient optical transceiver and network integration testing. The new attenuator generation sports an on-board graphical user interface for easy control without software installation, accessible via GbE LAN and USB 2.0 connections.

8162-C and N7749C Optical Power Meter Heads and Optical Head Interface

The new 8162-C series optical power heads provide a 5 mm detector area or an integrating sphere and allow flexible placement of the remote optical power meter, which is then connected to the N7749C. A wide choice of adapters allows input from popular fiber connector types, bare fibers or open beams. The magnetic D-shaped adapters allow rapid removal and replacement without twisting attached fibers