Accessories

• Withstands over 10,000 reconnection cycles, ensuring long-term reliability.
• Conforms with N-keying (also known as "wide key way") via a 2.20 mm (0.087 inches) key way.
• Facilitates fast and flexible adaptation of photonic test instruments to multiple connector types.

Fast, reliable, and convenient adaptation from H-MTD to SMA

• Adapt Rosenberger H-MTD to SMA for connection to an oscilloscope or other test equipment
• Use standalone or with AE6941A automotive test fixture
• Measurement accuracy and versatility for automotive MDI adaption
• Bandwidth DC – 10 GHz
• AE6960A-HMTD plug to two SMA jack adapters
  

AE6960A fixture is recommended for Automotive Ethernet 802.3ch and for lower gears of MIPI A-PHY, ASA.

The Keysight 3.5mm SMA Connector to Solderable Open Automotive Adapter offers generic solder-down flexibility to connect twisted-pair automotive cables to the measurement instrument or device under test. Compatible with RPC, it can transmit up to 1 Gbps, according to the IEEE 1000BASE-T1 standard. Designed for the DC to 10 GHz frequency range, this fixture is suitable for automotive Ethernet 10BASE-T1S, 100BASE-T1, and 1000BASE-T1.

• Adapt twisted-pair bare wires to SMA for easy connection to an oscilloscope or other test equipment.
• Use alone or with the Keysight AE6941A automotive test fixture.
• Achieve measurement accuracy and versatility for automotive media-dependent interface (MDI) adaption.

Quick, Easy, and Secure connection between HFM and SMA

• Adapt HFM to SMA for quick connection to an oscilloscope or other measurement system.
• Measurement accuracy and versatility for multiport automotive MDI adaption 
• Bandwidth DC – 20 GHz
• AE6966A-HFK (HFM jack to SMA jack) 
• AE6966A-HFS (HFM plug to SMA jack) 

The Keysight AE6966A HFM to 2.92 SMA adapter offers a way of connecting to your multiport automotive MDI interface. HFM® – High-Speed FAKRA-Mini is the next generation of automotive coax connectors for high data transmissions up to 20 Gbps. The small size makes it possible to place different modules on minimum installation space. Rosenberger HFM® is compliant to all common automotive standards. The AE6966A can be used to connect to a multiport housing. On the other end of the adapter is RPC-2.92 (Rosenberger Precision Connector) connectors are intermateable with common 2.92, 3.50, SMA, as well as K connectors. 

AE6966A fixtures are recommended for multi-gigabit Automotive Ethernet and for all gears/speed grades of MIPI A-PHY, ASA. These connectors are from Rosenberger, for more information on HFM please see: High Speed FAKRA Mini

High-speed Data (HSD) connection to 4 ports of RPC 2.92 (SMA)

• Measurement accuracy and versatility for automotive MDI adaption
• Adapt and connect HSD to 4 separate RPC 2.92 ports
• Bandwidth DC – 10 GHz
• AE6964A-HSK (HSD jack to 2.92 jack)
• AE6964A-HSS (HSD plug to 2.92 jack)

The Keysight AE6964A HSD to 2.92 RPC adapter offers a way of connecting to your automotive MDI interface. HSD is a homogeneous impedance-controlled interconnect system for High-Speed Data (RosenbergerHSD®) applications. This is a high-performance digital system for low-voltage differential signals which prevents interference from crosstalk and external sources. RPC-2.92 (Rosenberger Precision Connector) connectors are intermateable with common 2.92, 3.50, SMA, as well as K connectors.

The Keysight AC69DIGU digital interface connector can help you to:

• Control the instrument through external contacts.
  
• Monitor the operation status in real time.
• Integrate with Keysight power sources: AC6903L, AC6903H, AC6906L, AC6906H, AC6912L, AC6912H, AC6918L, and AC6918H.

The Keysight AC69ALGU external analog interface connector uses a DC signal to change the AC voltage, DC voltage, or frequency. This solution can help you:

• Enable the control parameter (CTRL Para) using the front panel soft key.
  
• Control the output with external analog signals.
• Integrate with Keysight power sources: AC6903L, AC6903H, AC6906L, AC6906H, AC6912L, AC6912H, AC6918L, and AC6918H.

The Keysight M1401A converts triaxial input to banana input on the Keysight M1412A PXIe Digital Multimeter.

• Dimensions: 115.2 mm H x 91.5 mm D x 21.3 mm W
  

The bracket can be plugged into Keysight U1240 Series handheld digital multimeters to connect with the U1173A IR-USB cable.

The 16201A terminal adapter is provided for the connection between the network analyzer’s test ports (type-N) and test fixtures with a 7 mm connector. Impedance analysis using the reflection method is supported with the E5061B ENA LF-RF Network Analyzer (Option 3L3/3L4/3L5) and impedance analysis software (Option 005).

N1254A Options: 

• N1254A-103: Adapter - Triax (m) Guard connected to BNC (f) Common, VOLT:DC 210V 
  
• N1254A-105: Adapter - Triax (f) Common connected to BNC (m) Common, VOLT:DC 210V
• N1254A-500: HV Jack Connector Panel Mount – Solder Type

You can buy several optional accessories and adapters online. For more information about N1254A accessories and adapters.

The Keysight Y1701A includes a latch kit for connecting two Keysight Streamline Series USB instruments. Optional interconnect cables are available to connect two USB vector network analyzers to increase the number of test ports.

• Option 001 Interconnect cables for multiport configuration of P937xA
• Option 101 Latch kit for connecting two 1-slot USB instruments
• Option 002 Interconnect cables for multiport configuration of P50xxA (up to 20 GHz)