Accessories

The AC68GPBU is a user-installable GPIB interface module upgrade for Keysight AC6800 Series basic AC power sources.

• Option available for the following models: AC6801B, AC6802B, AC6803B, AC6804B
• Order as: AC68GPBU
• Upgrade contents: GPIB module
• Adjustments required: No
• Additional requirements: No
• Installed by, estimated installation time: Customer, 3 minutes

Note: Only one slot available for either AC68GPBU GPIB Interface or AC68BALGU Analog Control or AC68BFIU Fault Interrupt

The Keysight AC69PAR1 is a parallel operation cable that enables up to four units of the AC6900 Series power sources.

• Span the length to 1 meter.
  
• Synchronize multiple power switches.
• Integrate with Keysight power sources: AC6906L, AC6906H, AC6912L, AC6912H, AC6918L, and AC6918H.

The Keysight AC69SYN1 cable synchronizes power switches on parallel units, enabling all secondary units to turn on automatically when you switch on the primary unit.

• Span the length to 1 meter.
• Synchronize multiple power switches.
• Integrate with Keysight power sources: AC6906L, AC6906H, AC6912L, AC6912H, AC6918L, and AC6918H.

The Keysight AC69DIGU digital interface connector can help you to:

• Control the instrument through external contacts.
  
• Monitor the operation status in real time.
• Integrate with Keysight power sources: AC6903L, AC6903H, AC6906L, AC6906H, AC6912L, AC6912H, AC6918L, and AC6918H.

The Keysight AC69ALGU external analog interface connector uses a DC signal to change the AC voltage, DC voltage, or frequency. This solution can help you:

• Enable the control parameter (CTRL Para) using the front panel soft key.
  
• Control the output with external analog signals.
• Integrate with Keysight power sources: AC6903L, AC6903H, AC6906L, AC6906H, AC6912L, AC6912H, AC6918L, and AC6918H.

The AC69GPBU is a user-installable GPIB interface module upgrade for Keysight AC6900 Series AC Sources.

• Option available for the following models: AC6903L, AC6903H, AC6906L, AC6906H, AC6912L, AC6912H, AC6918L, AC6918H
• Order as: AC69GPBU
• Upgrade contents: GPIB module
• Adjustments required: No
• Additional requirements: No
• Installed by, estimated installation time: Customer, 3 minutes

The AC68BRAC3 is a rack mount flange kit for the AC6801B, AC6802B, and AC6803B basic AC power sources.

Analog interface board allows you to control the output with external analog signals in two modes:

• The voltage of the output AC waveform (sine wave) varies according to the input DC signal (EXT-AC mode).
• The input waveform is amplified and output (EXT-DC mode).

Option Details

• Option available for the following models: AC6801B, AC6802B, AC6803B, AC6804B
• Order as: AC68BALGU
• Upgrade contents: Analog board
• Adjustments required: No
• Additional requirements: No
• Installed by, estimated installation time: Customer, 3 minutes

Only one slot available for either AC68BFIU Fault Inhibit Card or AC68BALGU Analog Card or AC68BGPBU GPIB Card

Fault inhibit board allows you to control the output state with external input signal in two modes:

• Latching mode – disables the output when the inhibit signal is true. This is treated as a protection event, and output remains disabled regardless of subsequent inhibit signal changes
• Live mode – allows the enabled output to follow the state of the inhibit signal

Option Details

• Option available for the following models: AC6801B, AC6802B, AC6803B, AC6804B
• Order as: AC68BFIU
• Upgrade contents: Fault inhibit board
• Adjustments required: No
• Additional requirements: No
• Installed by, estimated installation time: Customer, 3 minutes

Only one slot available for either AC68BFIU Fault Inhibit Card or AC68BALGU Analog Card or AC68GPBU GPIB Card
 

The AC68BRAC6 is a rack mount flange kit for the AC6804B basic AC power source.