Accessories

Superior RF Performance

• Maximum SWR at 2 GHz, APC-7: 1.005
• Maximum SWR at 2 GHz, Type-N: 1.01
• Maximum Power: 0.5 W avg/ 100 W peak

The Keysight 909C is a precision, low-reflection dc to 2 GHz load for terminating a 50-ohm coaxial system in its characteristic impedance. It is intended for use as a calibration standard. The Keysight 909C may be ordered with an APC-7, type-N male, or type-N female connector.

Superior RF Performance

• Maximum SWR at 26.5 GHz: 1.07
• Maximum SWR at 40 GHz: 1.12
• Maximum SWR at 50 GHz: 1.22
• Maximum Power: 0.5 W avg/ 100 W peak

The Keysight 85138A is a precision, low-reflection dc to 50 GHz load for terminating a 50-ohm coaxial system in its characteristic impedance. It is intended for use as a calibration standard. The Keysight 85138A has a 2.4 mm male connector.

Superior RF Performance

• Maximum SWR at 4 GHz, APC-7 (Type-N): 1.05 (1.06)
• Maximum SWR at 12.4 GHz, APC-7 (Type-N): 1.10 (1.11)
• Maximum SWR at 18 GHz, APC-7 (Type-N): 1.25 (1.30)
• Maximum Power: 2 W avg/ 300 W peak

The Keysight 909A is a general-purpose, low-reflection load for terminating a 50-ohm coaxial system in its characteristic impedance over the dc to 18 GHz range. It is suitable for both broadband and narrowband measuring instruments. The Keysight 909A may be ordered with an APC-7, type-N female, or type-N male connector.

Superior RF Performance

• Maximum SWR at 3 GHz: 1.02
• Maximum SWR at 5 GHz: 1.036
• Maximum SWR at 26.5 GHz: 1.12
• Maximum Power: 2 W avg/ 100 W peak

The Keysight 909D is a precision, low-reflection dc to 26.5 GHz load for terminating a 50-ohm coaxial system in its characteristic impedance. It is intended for use as a calibration standard.

The 42090A is an open termination and is primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers. Refer to the instrument's operation/service manual for the method of using this standard.

The 42091A is a short termination and is primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers. Refer to the instrument's operation/service manual for the method of using this standard.

Superior RF Performance (5,6,18GHz with APC)

• Maximum SWR at 5 GHz, APC-7: 1.006
• Maximum SWR at 6 GHz, APC-7: 1.013
• Maximum SWR at 18 GHz, APC-7: 1.15

Superior RF Performance (2,3,6,18GHz with Type-N)

• Maximum SWR at 2 GHz, Type-N: 1.007
• Maximum SWR at 3 GHz, Type-N: 1.01
• Maximum SWR at 6 GHz, Type-N: 1.02
• Maximum SWR at 18 GHz, Type-N: 1.15

The Keysight 909F family of precision low reflection loads are intended for use as calibration standards. Tantalum nitride on sapphire thin-film technology is used for exceptional long-term impedance stability. To ensure the best possible wear resistance characteristics, gold-plated beryllium copper has been used for the connector contacts.

The loads are available in APC-7, Type-N male and Type-N female configurations.

Superior RF Performance

• Maximum SWR at 3 GHz: 1.02
• Maximum Power: 0.5 W avg/ 100 W peak

The Keysight 909E is a precision, low-reflection dc to 3 GHz load for terminating a 75-ohm coaxial system in its characteristic impedance. It is intended for use as a calibration standard.

Superior RF Performance

• Maximum SWR at 26.5 GHz: 1.07
• Maximum SWR at 40 GHz: 1.12
• Maximum SWR at 50 GHz: 1.22
• Maximum Power: 0.5 W avg/ 100 W peak

The Keysight 85138B is a precision, low-reflection DC to 50 GHz load for terminating a 50-ohm coaxial system in its characteristic impedance. It is intended for use as a calibration standard. The Keysight 85138B has a 2.4 mm female connector.

Type: 2.4 mm female connector

The Keysight 85141B coaxial open is used for establishing measurement planes for known reflection phase and magnitude in 50-ohm coaxial systems. It has a 2.4 mm female connector.

Type: 2.4 mm male connector

The Keysight 85141A coaxial open is used for establishing measurement planes for known reflection phase and magnitude in 50-ohm coaxial systems. It has a 2.4 mm male connector.

Type: 2.4 mm female connector

The Keysight 85140B coaxial short is used for establishing measurement planes for known reflection phase and magnitude in 50-ohm coaxial systems. It has a 2.4 mm female connector.