Choose a country or area to see content specific to your location
What are you looking for?
-
-
Integrated Physics Suite
Bridging design and physical testing to evaluate drop, impact, shock, and vibration compliance before hardware exists.
-
Buy an Expert Oscilloscope, Boost Your Bandwidth
Unlock your free upgrade to the next bandwidth tier.
-
End-to-End Validation for AI Data Center
Strengthen 1.6T network reliability for AI-scale workloads from transceivers to interconnects.
-
Take On Complex MIMO Signals
Pair Keysight VSA software with the new XA5 signal analyzer for advanced visualization, demodulation, and analysis — start your 30-day trial today.
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Accelerate Semiconductor Innovation
Explore end-to-end workflows spanning IC design, validation, wafer test, and photonics.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
448 Gb/s Waveform Generation
Achieve 200+ Gbaud multi-level modulated signals with high-speed AWGs for digital and optical standards.
-
The Right Connection Makes the Measurement
Maximize accuracy and performance with precision accessories engineered for Keysight instruments.
Analyze Complex RF Signals FasterExplore dual-channel and ultra-wideband signal analysis for demanding RF workflows.
Digital Validation. Faster.Get faster, clearer insights with our new multicore, 12-bit oscilloscope up to 33 GHz. Trade in your old oscilloscope and get credit toward a new XR8.
-
- Solutions
-
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
FeaturedHands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Success Stories
HPE Juniper Networking Builds Next-Gen AI Infrastructure -
Quick access to support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 12 of 15
No Filter available
No Filter available
No Filter available
Accessories for Instruments and Fixtures
The N1254A includes several optional accessories and adapters for instruments.
The N1254A includes several optional accessories and adapters for instruments.
Accessories for Instruments and Fixtures
N1254A
The N1254A includes several optional accessories and adapters for instruments.
N1254A Options:
- N1254A-103: Adapter - Triax (m) Guard connected to BNC (f) Common, VOLT:DC 210V
- N1254A-105: Adapter - Triax (f) Common connected to BNC (m) Common, VOLT:DC 210V
- N1254A-500: HV Jack Connector Panel Mount – Solder Type
You can buy several optional accessories and adapters online. For more information about N1254A accessories and adapters.
Low Noise Test Cables For N1413 With B2980 Series, 3m
Easily construct a custom test fixture by converting the terminal configuration with the included connectors.
Easily construct a custom test fixture by converting the terminal configuration with the included connectors.
Low Noise Test Cables For N1413 With B2980 Series, 3m
N1427B
Easily construct a custom test fixture by converting the terminal configuration with the included connectors.
- Low Noise Test Cables with 3 m length to support voltage up to 1,000 V
- A built-in interlock circuit that safely measures high voltage
The N1427B is designed to operate specifically with the B2985B/87B Electrometer/High Resistance Meter. It comes with a separate triaxial (special screw-type) female connector and a High Voltage BNC (special type) female connector. This allows terminal configuration to be converted to any other configuration. Therefore, custom test fixture can easily be constructed. The N1413A High Resistance Meter Fixture Adapter is required to connect the N1427B to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Noise Test Cables For N1413 With B2980 Series, 1.5 m
Safely take high voltage measurements up to 1,000 V with this 1.5 m cable.
Safely take high voltage measurements up to 1,000 V with this 1.5 m cable.
Low Noise Test Cables For N1413 With B2980 Series, 1.5 m
N1427A
Safely take high voltage measurements up to 1,000 V with this 1.5 m cable.
- Low Noise Test Cables with 1.5 m length to support voltage up to 1,000 V
- A built-in interlock circuit that safely measure high voltage
The N1427A is designed to operate specifically with the B2985B/87B Electrometer/High Resistance Meter. It comes with a separate triaxial (special screw-type) female connector and a High Voltage BNC (special type) female connector. This allows terminal configuration to be converted to any other configuration. Therefore, custom test fixture can easily be constructed. The N1413A High Resistance Meter Fixture Adapter is also required to connect the N1427A to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Noise Test Leads for N1413 with B2980 Series, 3m
Accurately measure high resistance up to 100 GΩ with these 3 m shielded test leads.
Accurately measure high resistance up to 100 GΩ with these 3 m shielded test leads.
Low Noise Test Leads for N1413 with B2980 Series, 3m
N1425B
Accurately measure high resistance up to 100 GΩ with these 3 m shielded test leads.
- Low noise test leads with 3 m length to support voltage up to 1,000 V
- Electrical noise effects are reduced by the employment of shielded-cables and as a result, high resistance up to 100 GOhm can be measured accurately
- A built-in interlock circuit enables safe high voltage measurements
The N1425B is designed to operate specifically with the B2985B/87B. It can hold DUTs with large terminals being used with the N1426C. The N1426A with the N1425B is available for measurements of small DUTs such as PC boards or IC sockets. The N1426B with the N1425B enables the construction of simple custom-made test leads. The N1413A High Resistance Meter Fixture Adapter is also required to connect the N1425B to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Noise Test Leads for N1413 with B2980 Series, 1.5m
Accurately measure high resistance up to 100 GΩ with these 1.5-m shielded test leads.
Accurately measure high resistance up to 100 GΩ with these 1.5-m shielded test leads.
Low Noise Test Leads for N1413 with B2980 Series, 1.5m
N1425A
Accurately measure high resistance up to 100 GΩ with these 1.5-m shielded test leads.
- Low noise test leads with 1.5 m length to support voltage up to 1,000 V
- Electrical noise effects are reduced by the employment of shielded-cables and as a result, high resistance up to 100 GOhm can be measured accurately
- A built-in interlock circuit enables safe high voltage measurements
The N1425A is designed to operate specifically with the B2985B/87B. It can hold DUTs with large terminals being used with the N1426C. The N1426A with the N1425A is available for measurements of small DUTs such as PC boards or IC sockets. The N1426B with the N1425A enables the construction of simple custom-made test leads. The N1413A High Resistance Meter Fixture Adapter is also required to connect the N1425A to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Component Test Fixture for N1413 with B2980 Series
Comes with two component modules that can hold SMDs, leads, and various types of devices
Comes with two component modules that can hold SMDs, leads, and various types of devices
Component Test Fixture for N1413 with B2980 Series
N1428A
Comes with two component modules that can hold SMDs, leads, and various types of devices
- SMD, lead, and various types of devices are supported.
- Triaxial input terminal configuration minimizes the influences due to external noise, and as a result, high resistance up to 10 POhm can be measured accurately.
- A built-in interlock circuit enables safe high-voltage measurements.
The N1428A is designed to operate specifically with the B2985B / 87B electrometer / high resistance meter. It is provided with two component modules, which are used to hold SMD, lead, and various types of devices. Electrical noise effects are reduced by the employment of a shielded case. A built-in interlock circuit enables safe high-voltage measurements. The N1413A high resistance meter fixture adapter is also required to connect the N1428A to the B2985B / 87B.
High Resistance Measurement Universal Adapter
N1414A High Resistance Measurement Universal Adapter is used to simplify the connection for high resistance measurements by B2980A series electrometer.
N1414A High Resistance Measurement Universal Adapter is used to simplify the connection for high resistance measurements by B2980A series electrometer.
High Resistance Measurement Universal Adapter
N1414A
N1414A High Resistance Measurement Universal Adapter is used to simplify the connection for high resistance measurements by B2980A series electrometer.
- Simplifies cabling without considering common or ground connections
- Easy attachment
- Manual switch for selecting floating or grounded DUT
The N1414A is an adapter to simplify the connection for high resistance measurements by B2980B Series Electrometer/High Resistance Meter (B2985B, B2987B). With this accessory, you can only use a triaxial cable for current measurement and a banana cable to bias the DUT (a high value resistor).
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Leakage Triaxial Cable (0.4m / 0.8m / 1.5m / 3m / 4m)
16494A is suitable for low current applications down to the sub fA level. It supports a maximum voltage/current of 200 V / 1A DC.
16494A is suitable for low current applications down to the sub fA level. It supports a maximum voltage/current of 200 V / 1A DC.
Low Leakage Triaxial Cable (0.4m / 0.8m / 1.5m / 3m / 4m)
16494A
16494A is suitable for low current applications down to the sub fA level. It supports a maximum voltage/current of 200 V / 1A DC.
Cable length (options):
- 16494A-001: 1.5 m
- 16494A-002: 3.0 m
- 16494A-003: 0.8 m
- 16494A-004: 0.4 m
- 16494A-005: 4.0 m
Triaxial Cable for Current Higher than 1 A (1.5 m or 3 m)
16493L can be used as a general purpose triaxial cable for high current applications up to 4.2 A DC and 200 V. It can also be used for low current applications down to the sub-pA level.
16493L can be used as a general purpose triaxial cable for high current applications up to 4.2 A DC and 200 V. It can also be used for low current applications down to the sub-pA level.
Triaxial Cable for Current Higher than 1 A (1.5 m or 3 m)
16493L
16493L can be used as a general purpose triaxial cable for high current applications up to 4.2 A DC and 200 V. It can also be used for low current applications down to the sub-pA level.
Cable length (options):
- 16493L-001: 1.5 m
- 16493L-002: 3.0 m
BNC Coaxial Cable (1.5 m or 3 m)
16493B is suitable for general and low noise applications for up to 40 V and 200 mA.
16493B is suitable for general and low noise applications for up to 40 V and 200 mA.
BNC Coaxial Cable (1.5 m or 3 m)
16493B
16493B is suitable for general and low noise applications for up to 40 V and 200 mA.
Cable length (options):
- 16493B-001: 1.5 m
- 16493B-002: 3.0 m
Starter kit for B2985/B2987
Includes cable (N1415A) and adapter (N1414A) set for easy and convenient measurements with B2985A/B2987A.
Includes cable (N1415A) and adapter (N1414A) set for easy and convenient measurements with B2985A/B2987A.
Starter kit for B2985/B2987
N1410A
Includes cable (N1415A) and adapter (N1414A) set for easy and convenient measurements with B2985A/B2987A.
- Cable (N1415A) and adapter (N1414A) set for easy and convenient measurements by B2985B/B2987B
- More affordable than purchasing these accessories separately
The N1410A is a starter kit for B2985B and B2987B Electrometer/High Resistance Meter and includes N1414A High resistance measurement universal adapter and N1415A Triax to alligator cable. The N1414A helps you setup the cables and makes the cabling setup easier. The N1415A is recommended to measure more than 1 nA current, but you can probably measure less than 1 nA current with appropriately shielding.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Resistivity Cell for N1413 (50 mm Electrodes)
N1424A Resistivity Cell for N1413 (50 mm Electrodes) accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration.
N1424A Resistivity Cell for N1413 (50 mm Electrodes) accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration.
Resistivity Cell for N1413 (50 mm Electrodes)
N1424A
N1424A Resistivity Cell for N1413 (50 mm Electrodes) accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration.
- An electrode (diameter: 50mm) can satisfy various insulation measurement standards such as ASTM D-257.
- Triaxial input terminal configuration minimizes the influences due to external noise and as a result, high resistance up to 10 POhm can be measured accurately.
- A built-in interlock circuit enables safe high voltage measurements.
The N1424A is designed to operate specifically with the B2985B/87B Electrometer/High Resistance Meter. It is used to measure surface or volume resistance/resistivity of insulation materials. The N1413A High Resistance Meter Fixture Adapter is required to connect the N1424A to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
