Accessories

Superior RF performance

• Gain of more than 30dB (to 20GHz), 27 (to 26.5GHz)
• P1dB of more than 27dBm (to 20GHz),23dBm (to 26.5GHz)
• Noise figure of less than 10dB to 20GHz,13 to 26.5GHz (typ)

Connectors Type

• Rf connectors: 3.5mm(f)
• DC Detector output connector: BNC (f)

Bias Option

• [email protected],-15V@50mA
• Works with 87422A 70W Power Supply

The Keysight 83020A microwave system amplifier is a compact, off-the-shelf amplifier designed for systems designers and integrators. This amplifier provides power where you need it to recover system losses and to boost available power in RF and microwave ATE systems. The ultrabroad bandwidth from 2 to 26.5 GHz allows the designer to replace several narrow bandwidth amplifiers with a single Keysight amplifier, eliminating the need for crossover networks or multiple bias supplies.

For more information about USB preamplifiers, microwave amplifiers and system amplifiers, please visit Keysight Amplifiers.

Superior RF performance

• Gain of more than 20dB
• P1dB of more than 13dBm to 20GHz
• Noise figure of less than 13dB to 0.1GHz, 8dB to 18GHz, 13dB to 26.5GHz (typ)

Connectors Type

• Rf connectors: 3.5mm(f)

Bias Option

• +12V@450mA, -12V@50mA
• Works with 87421A 25 W Power Supply
• Works with 87422A 70 W Power Supply

The Keysight 83006A microwave system amplifier is a compact, off-the-shelf amplifier designed for systems designers and integrators. This amplifier provides power where you need it to recover system losses and to boost available power in RF and microwave ATE systems. The ultrabroad bandwidth from 10 MHz to 26.5 GHz allows the designer to replace several narrow bandwidth amplifiers with a single Keysight amplifier, eliminating the need for crossover networks or multiple bias supplies.

For more information about USB preamplifiers, microwave amplifiers and system amplifiers, please visit Keysight Amplifiers.

The M9379A RF Amp Module includes two amplifiers, RF switches, and a programmable step attenuator designed to operate with the M9485A and M980xA PXIe vector network analyzers (VNA). One of the internal amplifiers works as a programmable pre-amp containing two user-selectable paths, either an amplifier path with a variable gain using a step attenuator or bypass path. The M9379A can improve the noise floor of the measurement system with the M980xA PXIe VNA. For example, the M9379A with a pre-amp is an ideal solution for noise figure (NF) measurements using the M980xA's standard receivers up to 13.5 GHz. The 1-slot module also includes internal switches which are directly controlled by the M980xA's firmware, enabling synchronized fast measurements for both S-parameters and NF with the PXI system.

The M9379A RF Amp Module includes two amplifiers, RF switches, and a programmable step attenuator.

• Dual amplifiers improve S/N ratio of VNA receivers
• Synchronized NF measurements with the VNA
• Frequency: 50 MHz to 13.5 GHz
• > +21 dBm saturated output power at 3 GHz (typ.)
• > 25 dB forward gain at 3 GHz (typ.)

Superior RF Performance

• 22 dB gain
• 8 dBm output power
• 5 dB noise figure

Bias Option

• DC Bias Volt/Amp: +15 V at 80 mA
• Compact size, integral bias regulation

Preamplifiers and System Noise Figure Application Note – This note discusses noise figure basics including applications and characteristics of Keysight’s amplifier technology. Highlighted are Keysight’s 87405C portable preamplifiers that provide an exceptional gain of 25 dB up to 18 GHz and a probe-power bias connection which eliminates the need for an additional DC power supply.  Read the Preamplifiers and System Noise Figure Application Note now!

The Keysight 87405B microwave component amplifier brings compact, reliable gain block performance to systems integrators and microwave designers. With 22 dB minimum gain block and over 8 dBm output power, this amplifier offers output power where it is needed: at the test port.

Accessories Website

For more information about usb preamp, microwave amplifier and system amplifier, please visit Keysight Amplifiers.

Exceptional gain (25 dB) and flatness (±1.5 dB) combined with a probe-power bias connection which eliminates the need for an additional DC power supply, makes these preamplifiers the ideal choice for spectrum analyzer or stand alone applications. 

• 4.5 dB noise figure and 25 dB gain helps improve the dynamic range and sensitivity of your test equipment
• High 15 dBm P_1dB increases available power from network and spectrum analyzers
• DC Bias Volt/Amp: +15 V at 140 mA (nominal); -12.6V to -15V at 3mA (nominal)
• Rugged, portable design for ease of use in the field
• Probe-power bias connection eliminates the need for an additional power supply

For more information about usb preamp, microwave amplifier and system amplifier, please visit Keysight Amplifiers.

Superior RF performance

• Gain of more than 23dB
• P1dB of more than 8dBm (to 45GHz), 6dBm (to 50GHz)
• Noise figure of less than 12dB to 2GHz, 6dB to 26.5GHz, 10 to 50GHz (typ)

Connectors Type

• Rf connectors: 2.4mm(f)
• DC Detector output connector: BNC (f)

Bias Option

• +12V@425mA, -12V@50mA
• Works with 87421A 25W Power Supply

The Keysight 83051A microwave system amplifier is a compact, off-the-shelf amplifier designed for systems designers and integrators. This amplifier provides power where you need it to recover system losses and to boost available power in RF and microwave ATE systems. The ultrabroad bandwidth from 45 MHz to 50 GHz allows the designer to replace several narrow bandwidth amplifiers with a single Keysight amplifier, eliminating the need for crossover networks or multiple bias supplies.

For more information about usb preamp, microwave amplifier and system amplifier, please visit Keysight Amplifiers.

Superior RF performance

• Gain of more than 25dB
• P1dB of more than 23dBm
• Noise figure of less than 13dB (typ)

Connectors Type

• Rf connectors: 2.4mm(f)

Bias Option

• +12V@900mA
• Works with 87421A 25W Power Supply

The Keysight 87415A microwave component amplifier brings compact, reliable gain block performance to systems integrators and microwave designers. With 25 dB minimum gain and over 23 dBm output power from 2 to 8 GHz, this amplifier offers output power where it is needed: at the test port.

Superior RF performance

• Gain of more than 21dB
• P1dB of more than 15dBm (to 40GHz),13dBm (to 50GHz)
• Noise figure of less than 6dB to 26.5GHz,10 to 50GHz (typ)

Connectors Type

• Rf connectors: 2.4mm(f)
• DC Detector output connector: BNC (f)

Bias Option

• +12V@830mA,-12V@50mA
• Works with 87421A 25W Power Supply

The Keysight 83050A microwave system amplifier is a compact, off-the-shelf amplifier designed for systems designers and integrators. This amplifier provides power where you need it to recover system losses and to boost available power in RF and microwave ATE systems. The ultrabroad bandwidth from 2 to 50 GHz allows the designer to replace several narrow bandwidth amplifiers with a single Keysight amplifier, eliminating the need for crossover networks or multiple bias supplies.

For more information about USB preamplifiers, microwave amplifiers and system amplifiers, please visit Keysight Amplifiers.

Superior RF performance

• Gain of more than 25dB
• P1dB of more than 18dBm to 20GHz
• Noise figure of less than 8dB to 18GHz,13dB to 26.5GHz (typ)

Connectors Type

• Rf connectors: 3.5mm(f)
• DC Detector output connector: BNC (f)

Bias Option

• +12V@700mA, -12V@50mA
• Works with 87421A 25 W Power Supply
• Works with 87422A 70 W Power Supply

The Keysight 83017A microwave system amplifier is a compact, off-the-shelf amplifier designed for systems designers and integrators. This amplifier provides power where you need it to recover system losses and to boost available power in RF and microwave ATE systems. The ultrabroad bandwidth from 500 MHz to 26.5 GHz allows the designer to replace several narrow bandwidth amplifiers with a single Keysight amplifier, eliminating the need for crossover networks or multiple bias supplies.

For more information about USB preamplifiers, microwave amplifiers and system amplifiers, please visit Keysight Amplifiers.

Superior RF performance

• Gain of more than 27dB (to 20GHz), 23 (to 26.5GHz)
• P1dB of more than 22dBm (to 20GHz),17dBm (to 26.5GHz)
• Noise figure of less than 10dB to 20GHz,13 to 26.5GHz (typ)

Connectors Type

• Rf connectors: 3.5mm(f)
• DC Detector output connector: BNC (f)

Bias Option

• +12V@2A,-12V@50mA
• Works with 87421A 25 W Power Supply

The Keysight 83018A microwave system amplifier is a compact, off-the-shelf amplifier designed for systems designers and integrators. This amplifier provides power where you need it to recover system losses and to boost available power in RF and microwave ATE systems. The ultrabroad bandwidth from 2 to 26.5 GHz allows the designer to replace several narrow bandwidth amplifiers with a single Keysight amplifier, eliminating the need for crossover networks or multiple bias supplies. The standard Keysight 83018A includes internal directional detectors for external leveling applications. With excellent noise figure relative to its broad bandwidth and high gain, this amplifier significantly improves system noise figure and dynamic range. The Keysight 83018A comes equipped with a low profile heat sink, an integral mounting bracket, and a two-meter dc power supply cable. Thermal characteristics and power supply design allow fast, easy integration into most measurement systems.

For more information about USB preamplifiers, microwave amplifiers and system amplifiers, please visit Keysight Amplifiers.

• N4985A-P15 operates from 10 MHz to 50 GHz
• N4985A-P25 operates from 2 to 50 GHz
• N4985A-S30 operates from 100 kHz to 30 GHz
• N4985A-S50 operates from 100 kHz to 50 GHz
• N4985A-OA3 Optical Application Tuning for Option S30
• N4985A-OA5 Optical Application Tuning for Option S50
• High gain
• Compact size

The Keysight Technologies N4985A series system amplifiers are high performance broadband amplifiers with excellent power and gain from 100 kHz to 50 GHz. The amplifiers are self-contained and plug into standard AC power sources.

Applications:

• Bench-top lab work
• Production line testing
• Frequency/time domain applications
• Saturated RF amplifier testing
• Drive TWT amplifiers
• Antenna system amplification

The Keysight 87421A universal input, DC switching power supply provides bias voltages to operate Keysight microwave system amplifiers. Integrate these compact power supplies into a system or use standalone on the bench. The 87421A may also be used to supply bias voltages to the Keysight 83440C high speed lightwave converter with the Keysight 83440-60009 lightwave converter power supply adapter.

Features

• Designed for Keysight microwave system amplifiers (83006A, 83017A, 83018A, 83050A, 83051A, or 87415A)
• 2-meter bias cable for remote placement
• Compact size for easy system integration

DC Output Voltage/Current

• +12 V at 2.0 A, -12 V at 200 mA
• Output Power: 25 W, maximum