Here's the page we think you wanted. See search results instead:

Buy an Oscilloscope, Get Free Memory & Software

For a limited time, receive a free memory upgrade and software package when you purchase an Infiniium EXR-Series Oscilloscope

View Deal

HIGHLIGHTS

  • Set up your scope to show CAN, CAN FD, CAN XL, LIN, FlexRay, and SENT protocol decode in less than 30 seconds
  • Support CAN XL protocol trigger and decode of the SIC mode (or slow mode) signal in the arbitration phase as well as the FAST mode signal in the data phase
  • Get access to a rich set of integrated software-based protocol-level triggers
  • Save time and eliminate errors by viewing packets at the protocol level
  • Use time-correlated views to quickly troubleshoot serial protocol problems back to their timing or signal integrity root cause

This application (for Infiniium Oscilloscopes) includes a suite of configurable protocol-level trigger conditions specific to CAN, CAN FD, CAN XL, LIN, FlexRay, and SENT. When serial triggering is selected, the application enables software-based triggering. Application supports CAN-dbc symbolic debug.

Free Trials

Get a 30-day trial license for D9010AUTP.

The D9010AUTP Automotive Protocol Decode/Trigger (CAN, CAN FD, CAN XL, LIN, FlexRay, SENT) software comes pre-installed on Keysight Infiniium oscilloscopes, so there are no files to download and install.

Interested in a D9010AUTP?

Extend the capabilities for your Automotive Protocol Decode/Trigger Software (CAN, CAN FD, CAN XL, LIN, FLEXRAY, SENT)

Software
Services
See All Services
Support
See All Support

Featured Resources for D9010AUTP Automotive Protocol Decode/Trigger Software (CAN, LIN, CAN-FD, FlexRay, SENT)

Data Sheets 2023.10.05

D9110AUTP Automotive Protocol Trigger and Decode

D9110AUTP Automotive Protocol Trigger and Decode

The D9110AUTP software package for Infiniium oscilloscopes gives you the ability to trigger and decode on a large and ever-expanding suite of low-speed automotive serial protocols: CAN, CAN-FD, CAN-XL, LIN, FlexRay and SENT. This package applies to the Keysight MXR, EXR, 9000, 90000, S, V, Z, and UXR-Series Infiniium Oscilloscopes.

2023.10.05

Application Notes 2024.03.05

Using an Oscilloscope for Automotive Serial Bus Testing

Using an Oscilloscope for Automotive Serial Bus Testing

Engineers primarily use oscilloscopes to debug and characterize various automotive serial buses. These include the controller area network (CAN), CAN FD, CAN XL, local interconnect network (LIN), FlexRay, single-edge nibble transmission (SENT), and automotive Ethernet. An oscilloscope inherently characterizes the analog quality of these signals. Performing analog characterization using an oscilloscope is often called physical layer testing. Serial bus protocol analyzers provide optimal measurement performance at the application layer. These instruments provide a trace flow of data at a higher abstract level. This application note explains how to decode, trigger, and symbolically decode your buses. It also includes use-case examples for identifying errors and signal quality issues in your automotive designs.

2024.03.05

View All Resources

View All Resources

Want help or have questions?

Contact Us