White Papers 2017.01.30

5 Fehler, die beim Kauf eines  preis­günstigen Oszillo­skops oft gemacht werden

5 Fehler, die beim Kauf eines preis­günstigen Oszillo­skops oft gemacht werden

Choosing the right oscilloscope can be a difficult task, especially with a small budget. Ensure you’re getting your money’s worth and avoid these 5 common mistakes when buying a low-cost oscilloscope.

2017.01.30

White Papers 2020.02.13

Using a Waveform Generator to Create a Pseudorandom Binary Sequence Signal

Using a Waveform Generator to Create a Pseudorandom Binary Sequence Signal

Learn how to simulate noise in a variety of frequency bandwidths and perform acoustic testing of a structure. Overcome test challenges using a waveform generator to create pseudorandom binary sequence signals.

2020.02.13

White Papers 2020.02.05

IQ Signal Generation Made Easy

IQ Signal Generation Made Easy

This white paper will cover how to generate both ideal and non-ideal IQ signals. We will use the Keysight 33500B and 33600A Trueform Series waveform generators with the IQ Signal Player option to show you how to do this.

2020.02.05

White Papers 2020.01.31

Using Simulation to Overcome 3 Millimeter-Wave Design Challenges

Using Simulation to Overcome 3 Millimeter-Wave Design Challenges

Radio designers are embracing system simulation to reduce design time and ensure their devices meet the 5G NR specification. We explore 3 simulation techniques to overcome mmWave design challenges.

2020.01.31

White Papers 2020.01.31

Three Best Practices for Optimizing EVM Measurements for Wideband Signals

Three Best Practices for Optimizing EVM Measurements for Wideband Signals

Learn three best practices for accurately making and optimizing EVM measurements.

2020.01.31

White Papers 2020.01.30

Automotive Ethernet: Enabling the Future of Autonomous Driving

Automotive Ethernet: Enabling the Future of Autonomous Driving

Autonomous vehicles and advanced driver assistance systems (ADAS) need higher bandwidth and lower latency. Automotive Ethernet is the new backbone for faster onboard networking.

2020.01.30

White Papers 2020.01.28

The Blueprint to a Successful Industrial Internet of Things

The Blueprint to a Successful Industrial Internet of Things

This white paper addresses device reliability, adherence to industry standards, regulations, and interoperability for a successful Industrial Internet of Things (IIoT).

2020.01.28

White Papers 2020.01.26

Designing for DDR4 and Beyond

Designing for DDR4 and Beyond

High-speed digital standards are evolving to keep pace with emerging technologies such as 5G, the Internet of Things (IoT), artificial intelligence, and autonomous vehicles. While each technological advancement certainly raises the bar for innovation, each step forward brings forth new obstacles, particularly for hardware engineers designing memory systems. It's critical that memory designers employ the right simulation-based design and analysis workflow solution. Here's how.

2020.01.26

White Papers 2020.01.22

Five Strategies to Accelerate 5G Device Development

Five Strategies to Accelerate 5G Device Development

Designing and implementing 5G devices in new mmWave operating bands present new challenges. New technologies and evolving standards increase design complexity. Here are five strategies to help you address these challenges and get your designs to market faster.

2020.01.22

White Papers 2020.01.20

PCIe 5.0 - The Next Generation of Peripheral Component Interconnect

PCIe 5.0 - The Next Generation of Peripheral Component Interconnect

Learn about the next generation of PCI Express. PCI Express 5.0 doubles the data rate from the PCIe 4.0

2020.01.20

White Papers 2020.01.19

Four Channel Power Measurement Must-Haves for Your Field Kit

Four Channel Power Measurement Must-Haves for Your Field Kit

Modern communications systems have complex modulation formats. This white paper covers four channel power measurements you should make in the field to ensure the performance and compliance of these systems.

2020.01.19

White Papers 2020.01.16

Test Teams Gain Competitive Advantage by Embracing a Platform-Based Approach

Test Teams Gain Competitive Advantage by Embracing a Platform-Based Approach

Electronics are getting more sophisticated and complex every day. Chips, boards, and the systems they make up are increasingly difficult to design. Companies engaged in electronic product development are regularly employing platform-based approaches in their design projects. Benefits of a platform-based approach include faster time-to-market, increased engineering productivity and cost-efficiency, improved design and test reuse, and faster analysis and insight that supports better decision-making.

2020.01.16

Case Studies 2020.01.29

Automotive ECU Designer Reduces Power Consumption by 10%

Automotive ECU Designer Reduces Power Consumption by 10%

An automotive chipmaker solved large peak current issues, reducing power consumption and heat generation while ensuring reliability of its products for advanced driver assistance systems.

2020.01.29

Case Studies 2020.01.06

PCBA Manufacturer Shifts Gears for Autonomous Driving with Keysight ICT

PCBA Manufacturer Shifts Gears for Autonomous Driving with Keysight ICT

Leading printed circuit board assembly manufacturer tests 15 million automotive boards with almost no downtime, exceeding its test target.

2020.01.06

Case Studies 2019.12.12

Chord Signaling for High-Speed Chip-to-Chip Applications

Chord Signaling for High-Speed Chip-to-Chip Applications

Chord signaling technology increases data throughput, while reducing power in next-generation high-speed links

2019.12.12

Case Studies 2019.11.03

GISTDA National Space Agency Captures CubeSat Opportunity

GISTDA National Space Agency Captures CubeSat Opportunity

By setting up an RF satellite lab that leveraged a handheld spectrum analyzer, Thailand’s space agency overcame the testing challenges facing its new SmallSat program.

2019.11.03

Case Studies 2019.10.31

Production Throughput Doubles with Keysight i3070 Advanced Throughput Multiplier

Production Throughput Doubles with Keysight i3070 Advanced Throughput Multiplier

2019.10.31

Case Studies 2019.10.24

Antenna Module Manufacturer Accelerates 5G mmWave Development by More than 50%

Antenna Module Manufacturer Accelerates 5G mmWave Development by More than 50%

A global antenna module manufacturer uses Keysight's 5G R&D Test Bed and PNA network analyzer to accelerate the development time for its 5G mmWave products based on beamforming technologies.

2019.10.24

Case Studies 2019.10.17

Delivering First 5G NR Device Technology for Volume Shipments

Delivering First 5G NR Device Technology for Volume Shipments

While 5G New Radio (NR) has been tested in design labs and deployed in multiple trials around the world, translating the 5G NR specification into commercial products that can be produced in volume is essential to successful 5G deployments at scale. This case study outlines how a 5G device manufacturer accelerated their time to market by several months and reduced test times by 20% in volume manufacturing.

2019.10.17

Case Studies 2019.10.15

Implantable Medical Devices Customer

Implantable Medical Devices Customer

A Keysight application engineer worked with the design engineering team at an implantable medical device manufacturer to recommend a solution consisting of hardware and software for battery drain analysis. The key solution components are the N6705C DC Power Analyzer, the N6781A 2-quadrant SMU for battery drain analysis and Keysight's 14585A control and analysis software.

2019.10.15

Case Studies 2019.10.13

Turn Your Keysight Handheld Meter into a  Data Logger

Turn Your Keysight Handheld Meter into a Data Logger

Case study on how to turn Keysight Handheld Meter with U1177A IR-to-Bluetooth® adapter with an Android Phone or tablet PC into a Data Logger

2019.10.13

Case Studies 2019.10.07

ASE Reduces Antenna-in-Package Test Time by 20% with Keysight’s PNA

ASE Reduces Antenna-in-Package Test Time by 20% with Keysight’s PNA

Learn how Keysight's PNA Vector Network Analyzer helped Advanced Semiconductor Engineering, Inc. accurately test its high frequency antenna-in-package designs, and reduce overall test time by 20%.

2019.10.07

Case Studies 2019.09.30

SECO Reduces DDR4 Board Failures to Zero and Design Optimization Time by 35%

SECO Reduces DDR4 Board Failures to Zero and Design Optimization Time by 35%

As the speed of DDR technology increases, signal integrity becomes more challenging to maintain. To ensure reliable and accurate designs, they now require new tools and processes.

2019.09.30

Case Studies 2019.09.23

Mini-Circuits Decreases Manufacturing Test Time by 80% with Keysight’s PXI Vector Network Analyzer

Mini-Circuits Decreases Manufacturing Test Time by 80% with Keysight’s PXI Vector Network Analyzer

Learn how Keysight's PXI Vector Network Analyzer reduced Mini Circuit's manufacturing test time of their 10-port components by 80%.

2019.09.23

E-Books 2017.02.08

6 wichtige Tipps: So holen Sie das Maximum aus Ihrem Oszilloskop heraus

6 wichtige Tipps: So holen Sie das Maximum aus Ihrem Oszilloskop heraus

Six tips covering basic triggering, probing, scaling signals, using the right acquisition mode, seeing more detail, and using integrated protocol decoders.

2017.02.08

eBooks 2020.01.30

4 Ways to Efficiently Generate Complex Waveforms

4 Ways to Efficiently Generate Complex Waveforms

Generating the signals to characterize, test or troubleshoot electrical designs or systems can be tedious and time=consuming. So, our experts came up with four ideas to help you more efficiently generate simple or complex waveforms.

2020.01.30

eBooks 2020.01.29

Engineering the 5G World

Engineering the 5G World

This book provides an overview of 5G technology, focusing on test and measurement and its role in the development of 5G. This book delivers the collective distilled wisdom of Keysight 5G experts. It summarizes the fundamentals of 5G across the entire ecosystem and introduces best practices for testing 5G solutions across the entire 5G workflow.

2020.01.29

eBooks 2019.12.06

Switch Mode Power Supply Analysis

Switch Mode Power Supply Analysis

All electrical products have one thing in common: a power supply. Without stable, well-regulated DC power, devices can malfunction. Learn how to test your switch mode power supplies with an oscilloscope to ensure your designs are safe and reliable.

2019.12.06

eBooks 2019.11.19

Four Tips to Protect Against Power-Related Damage

Four Tips to Protect Against Power-Related Damage

High power devices that store energy or contain reactive components are notorious for damaging themselves and the surrounding equipment. Get four tips to help protect your devices and equipment. The first tip provides a way to not only protect against over-power, and not just overvoltage or overcurrent. The second tip helps protect your supply when working with more than one power source. To reduce inrush current, tip 3 provides a method to slow the rate of output voltage change. Lastly, some devices can handle a tremendous surge of current and tip four addresses how to keep the power supply active during a surge.

2019.11.19

eBooks 2019.10.26

Four Tips for Powering and Testing Higher Current Devices

Four Tips for Powering and Testing Higher Current Devices

High current systems share several challenges for a dc power supply. The first challenge is to measure not only the large active current but also the small standby currents used by the control logic. A second challenge is to mimic a battery and supply large amounts of current when the voltage or load suddenly changes. The third challenge is to speed device characterization by changing output voltages quickly. Finally, understanding the effect that wiring has on power supplies ability to react to a change in voltage or the load.

2019.10.26

eBooks 2019.10.07

X-Apps Marks the Spot - Essential Signal Analyzer Measurement Apps for Saving Test Time

X-Apps Marks the Spot - Essential Signal Analyzer Measurement Apps for Saving Test Time

Learn how measurement applications increase both the capability and functionality of signal analyzers, while reducing your time to measurement insights.

2019.10.07

eBooks 2019.09.10

Fundamentals of Sensor Measurements Using a DMM

Fundamentals of Sensor Measurements Using a DMM

In this e-book, you will learn more about the types of sensors that are available and how they are transforming our world. You will gain insights into the critical parameters of a sensor, irrespective of its physical measurement types, learn about key considerations for choosing the right digital multimeter for sensor testing and characterization and lastly discover methods for characterizing and troubleshooting a sensor using a DMM.

2019.09.10

eBooks 2019.09.09

Three Key Trends in Data Center Interconnects reach 400G Speeds and Beyond

Three Key Trends in Data Center Interconnects reach 400G Speeds and Beyond

Traditionally, coherent optical technology has been too expensive to use in data center interconnects, which are typically less than 80 km apart. New photonic integrated circuits and standards, such as 400ZR and IEEE 802.3ct, will enable physically separated data centers to cost effectively increase speeds to 400 Gb/s. These standards will ensure efficiency when sharing resources, balancing workloads, and scaling capacity.

2019.09.09

eBooks 2019.09.08

PathWave EM Simulations

PathWave EM Simulations

With the complexity of IC components increasing, EM circuit simulation is now critical for accurate and efficient design. With EM simulation, designers can account for EM effects on their circuit to avoid costly problems before they happen.

2019.09.08

eBooks 2019.09.08

Four Functions that Enhance Your Network Analysis

Four Functions that Enhance Your Network Analysis

This eBook explores advanced network analyzer functions that give you faster, deeper insights into your devices.

2019.09.08

eBooks 2019.08.02

4 Key Considerations for 5th Generation High-Speed Digital Designs

4 Key Considerations for 5th Generation High-Speed Digital Designs

Faster networking requires faster memory and faster serial bus communications. As data center operators begin the migration of their data center networks from 100GE to 400GE, they need a migration plan that delivers the next-generation of high-speed computing interfaces such as PCIe 5.0 and DDR5.

2019.08.02

Lösungsbeschreibungen 2018.04.22

Test Asset Optimization Services - Pathwave Asset Advisor

Test Asset Optimization Services - Pathwave Asset Advisor

Gain insights to improve efficiency by measuring true asset utilization and driving asset sharing through loan pools.

2018.04.22

Lösungsbeschreibungen 2017.02.05

Testressourcen-Optimierungsservices

Testressourcen-Optimierungsservices

Let our professional services team and PathWave Asset Advisor - Loan Pool application manage your asset pool to reduce capital expenses and drive utilization improvements.

2017.02.05

Solution Briefs 2020.02.11

PROPSIM SATCOM Channel Emulation Solution

PROPSIM SATCOM Channel Emulation Solution

Satellite systems have been a highly specialized communication channel, where the systems have been tailored for a special purpose. The 5G Non-Terrestrial Networks (NTN) are planned to support the cellular and broadband internet connections by providing a robust secondary link for routing data. It is certain that the specialized SATCOM applications will not disappear, such as global navigation systems or terrain imaging. The need for rapid growth of high throughput in cellular networks and mobile broadband dominate the investments for the future satellite systems.

2020.02.11

Solution Briefs 2020.01.30

ZA0047A Wireless IOT Device Regulatory Test Solution

ZA0047A Wireless IOT Device Regulatory Test Solution

This solution brief introduces Keysight wireless regulatory test solution partnered together with solution partner to provide turnkey total solution.

2020.01.30

Solution Briefs 2019.12.19

Regenerative Power Supply Addresses Efficiency, Safety, and Environmental Challenges

Regenerative Power Supply Addresses Efficiency, Safety, and Environmental Challenges

The diversification of the automotive market into HEVs (hybrid electric vehicles) and EVs (electric vehicles) creates new challenges in design and manufacturing.

2019.12.19

Solution Briefs 2019.11.30

Quantum Engineering Toolkit (QET)

Quantum Engineering Toolkit (QET)

Keysight's Quantum Engineering Toolkit (QET) provides control sequence development that manipulates the signal path and complements APIs and Hard Virtual Instrumentation (HVI) controls.

2019.11.30

Solution Briefs 2019.09.09

SA8700A C-V2X Test

SA8700A C-V2X Test

Keysight offers the only solution that is tracking along with the evolving C-V2X standard. The SA8700A test solution supports RF, protocol and application-layer testing, and the underlying platform will support future releases of 5G NR C-V2X.

2019.09.09

Solution Briefs 2019.08.19

S8702A 5G RF Automation Toolset

S8702A 5G RF Automation Toolset

Keysight’s 5G RF Automation Toolset leverages the E7515B or the E7515E UXM 5G Wireless Test Platforms to provide users with a comprehensive range of tests to quickly verify the transmitter (Tx) and receiver (Rx) performance of 5G new radio (NR) devices in accordance with the 3GPP specifications. The toolset forms part of Keysight’s suite of 5G network emulation solutions and offers a flexible and easy-to-use software environment.

2019.08.19

Solution Briefs 2019.07.18

5G Non-Signaling Manufacturing Solution

5G Non-Signaling Manufacturing Solution

Keysight’s 5G non-signaling manufacturing test solution efficiently addresses the above challenges, enabling the user to verify multiple devices in parallel using an industry-proven platform that supports all bands defined for 5G NR as well as for legacy technologies, including LTE and 802.11ax. Integrated waveform and measurement software based on Keysight’s trusted algorithms delivers accurate test results.

2019.07.18

Solution Briefs 2019.06.25

Active Load Pull Measurements at Millimeter-Wave and Sub-THz Frequencies

Active Load Pull Measurements at Millimeter-Wave and Sub-THz Frequencies

A solution from Keysight Technologies, Maury Microwave and development partner Vertigo Technologies that provides active load pull measurements at mmW and sub-THz frequencies.

2019.06.25

Solution Briefs 2019.06.12

5G Multi-Band Vector Transceiver

5G Multi-Band Vector Transceiver

The S9100A 5G Multi-Band Vector Transceiver is a streamlined, non-signaling measurement system that enables automated testing of 5G NR equipment in the FR1 (sub-6 GHz) and FR2 (24-44 GHz) bands.

2019.06.12

Solution Briefs 2019.06.05

Automotive Radar Testing Solutions

Automotive Radar Testing Solutions

This Solution Brief discusses Automotive Radar Testing Solutions

2019.06.05

Broschüren 2018.10.31

Keysight Technologies Distribution Produktkatalog

Keysight Technologies Distribution Produktkatalog

Distribution Products Catalogue 2018/2019

2018.10.31

Broschüren 2017.04.06

Revealing Potential

Revealing Potential

This document provides an interactive overview of Keysight Services.

2017.04.06

Broschüren 2017.04.01

Nemo Global License Server

Nemo Global License Server

This 2-page brochure introduces key features and benefits of Nemo Global License Server

2017.04.01

Broschüren 2017.03.12

Nemo Xynergy Geospatial Intelligence

Nemo Xynergy Geospatial Intelligence

This 2-page brochure introduces key features and benefits of Nemo Xynergy Geospatial Intelligence

2017.03.12

Broschüren 2017.02.28

Nemo Outdoor

Nemo Outdoor

This 2-page brochure introduces key features and benefits of Nemo Outdoor

2017.02.28

Broschüren 2017.02.23

Nemo Cloud

Nemo Cloud

This 2-page brochure introduces key features and benefits of Nemo Cloud

2017.02.23

Broschüren 2017.02.09

Kurzbeschreibung-Keysight Technologies Infoline Services

Kurzbeschreibung-Keysight Technologies Infoline Services

A customer's personalized and secure window into Keysight calibration and repair services

2017.02.09

Broschüren 2017.01.25

Nemo Handy

Nemo Handy

This 2-page brochure introduces key features and benefits of Nemo Handy

2017.01.25

Broschüren 2017.01.25

Nemo Xynergy Drive Test

Nemo Xynergy Drive Test

This 2-page brochure introduces key features and benefits of Nemo Xynergy Drive Test

2017.01.25

Broschüren 2017.01.25

Nemo Xynergy Network Management

Nemo Xynergy Network Management

This 2-page brochure introduces key features and benefits of Nemo Xynergy Network Management

2017.01.25

Broschüren 2017.01.25

Nemo Xynergy Small Cells

Nemo Xynergy Small Cells

This 2-page brochure introduces key features and benefits of Nemo Xynergy Small Cell

2017.01.25

Broschüren 2017.01.25

Nemo Walker Air

Nemo Walker Air

This 2-page brochure introduces key features and benefits of Nemo Walker Air

2017.01.25

Applikationsberichte 2017.02.09

7 Dinge, die alle Benutzer  hochentwickelter Oszilloskope wissen sollten

7 Dinge, die alle Benutzer hochentwickelter Oszilloskope wissen sollten

Take your testing to the next level by learning seven concepts that advanced oscilloscope users should know to help save time and improve the quality of their testing.

2017.02.09

Applikationsberichte 2015.12.14

FET Characterization Using the B2900A Series of SMUs

FET Characterization Using the B2900A Series of SMUs

The Keysight B2900A Series Precision SMU allows you to evaluate IV characteristics of FET accurately and quickly with its intuitive GUI and free PC-based application software.

2015.12.14

Applikationsberichte 2014.08.03

Making Low Resistance Measurements Using the B2961A and 34420A

Making Low Resistance Measurements Using the B2961A and 34420A

This 1-pager introduces the B2961A/B2962A Power Source combined with the 34420A which satisfies the requirement on the precise low resistance measurements.

2014.08.03

Applikationsberichte 2014.08.02

Resistance Measurements Using the B2900A Series of SMUs

Resistance Measurements Using the B2900A Series of SMUs

This technical overview describes the use of the B2900 series of precision source/measure units for resistance measurements

2014.08.02

Applikationsberichte 2014.08.01

Was ist bei der Auswahl einer

Was ist bei der Auswahl einer

This application note discusses some of the fundamental considerations for specifying and buying a DC power supply. It addresses questions such as “Which power supply will suit my application needs?

2014.08.01

Applikationsberichte 2014.08.01

IV Characterizations of Solar Cells Using the B2900A Series of SMUs

IV Characterizations of Solar Cells Using the B2900A Series of SMUs

The Agilent B2900A Series Precision SMU allows you to accurately and quickly make characterization of photovoltaic cells with its intuitive GUI and free PC-based application software.

2014.08.01

Applikationsberichte 2014.08.01

USB-Koaxialschalter für HF/Mikrowellen-Mess- und Testanwendungen

USB-Koaxialschalter für HF/Mikrowellen-Mess- und Testanwendungen

This application note describes features and application examples for the U1810B USB coaxial switch, with options for measuring multiple DUT or performing multiple tasks with a single connection.

2014.08.01

Applikationsberichte 2013.06.12

testing for ePrint workflow

testing for ePrint workflow

test

2013.06.12

Application Notes 2020.02.05

Waveform Sequencing with PathWave BenchVue Waveform Builder Pro

Waveform Sequencing with PathWave BenchVue Waveform Builder Pro

The application note covers how to implement waveform sequencing using 33503A PathWave BenchVue Waveform Builder Pro, supported by Keysight 33500B and 33600A Series Trueform waveform generators.

2020.02.05

Application Notes 2020.02.01

Evaluating Battery Run-Down with the N6781A or N6785A 2-Quadrant Source/Measure Unit and the BV9200B Control and Analysis Software

Evaluating Battery Run-Down with the N6781A or N6785A 2-Quadrant Source/Measure Unit and the BV9200B Control and Analysis Software

This application note will describe in detail the procedure on evaluating battery run down to easily and accurately evaluate performance of a mobile device that is being directly powered by its battery.

2020.02.01

Application Notes 2020.01.22

Software Verifier for nanoVTEP i3070 In-Circuit Tester

Software Verifier for nanoVTEP i3070 In-Circuit Tester

The software verifier revision 6.0 is a utility tool for verification of the nanoVTEP signal conditioner board (mux card) and its probe. This application note describes the steps to download, execute, and interpret its test results.

2020.01.22

Application Notes 2020.01.19

Create Accurate EVM Measurements with the PNA-X Series Network Analyzer

Create Accurate EVM Measurements with the PNA-X Series Network Analyzer

In this application note, you will learn an innovative method for characterizing nonlinearity of the power amplifier under modulated stimulus condition.

2020.01.19

Sie suchen mehr?
Erkunden, filtern und durchsuchen Sie unsere umfangreichen Bibliotheken nach Pre- und Post-Sales-Literatur, -Videos, -Webinaren und mehr.