F9660A 3D Multi-Probe Anechoic Chamber (MPAC)

The F9642A 2D MPAC Pro enables protocol, functional, and RF test capability for FR2 and FR1 4x4 MIMO OTA with Keysight’s Network Emulation Solutions.

Channel Emulators Catalog

This catalog highlights Keysight’s channel emulators and OTA chambers that recreate real‑world RF conditions for validating wireless devices, base stations, satellite systems, and MANET networks across sub‑6 GHz and mmWave bands with precise fading, mobility, interference, and spatial modeling.

Introducing Keysight's 2D MPAC OTA Chamber

Introducing Keysight's F9660A 3D MPAC OTA Chamber

F9642A 2D Multi-Probe Anechoic Chamber (MPAC) Pro

The F9642A 2D MPAC Pro enables protocol, functional, and RF test capability for FR2 and FR1 4x4 MIMO OTA with Keysight’s Network Emulation Solutions.

8100 Mobile Device Test System for OTA Test

The 8100 Mobile Device Test System provides customizable parameters to enable test time optimization, as well as testing beyond the requirements of these industry standards.

AR8700C Automotive Radar OTA Test Solution

The Keysight AR8700C Advanced CATR Chamber solution for automotive radar provides a measurement environment for characterizing functionality, performance, and antenna radiation patterns of radar sensors at E-band millimeter-wave (mmWave) frequencies. Use

S8810A MIMO OTA Emulator Toolset

Keysight’s S8810A MIMO OTA Emulator Toolset solves the testing challenges by accurately simulating the characteristics of real-world radio channel conditions. With the toolset, you can reliably and cost-effectively test your 5G MIMO OTA devices within a laboratory environment. Verified MIMO performance significantly improves network optimization and the quality of service for mobile device users. Keysight’s S8810A MIMO OTA Emulator Toolset supports performance comparisons between off-the-shelf mobile devices under real-world conditions in a laboratory environment.

Propsim Channel Emulation MIMO Over-the-Air (OTA) Testing

Product brochure for Propsim Channel Emulation MIMO Over-the-Air (OTA) Testing.

OTA Setup for 5G TF Beamforming Functional Tests

This paper describes OTA beamforming functional test procedures for both 5G TF and 3GPP 5G NR deployments with multiple angle of arrivals (AoA).

Anite MIMO OTA Testing - Introduction

This video demonstrates Anite's integrated future-proof MIMO Over-the-Air test solutions.

OTA Test for Millimeter-Wave 5G NR Devices and Systems

Learn about the challenges of OTA testing and test methods like millimeter-wave devices, phased array technology, millimeter wave beamforming and beamsteering.

OTA Measurement and Calibration

Dive into millimeter wave spectrum, highlighting opportunities, challenges, and the importance of over-the-air testing in wireless communications.

OTA Modulated Signal Phased Array Antenna Test

Watch part four of Keysight’s VNA Active Device Characterization Essentials webinar series to learn how to simplify and accelerate the phased array testing using the VXG signal generator, PNA-X network analyzer, and modulation distortion analysis software application.

mmWave 5G OTA Measurements Fundamentals

5G millimeter-wave (mmWave) devices bring over-the-air (OTA) challenges to design and test engineers across the device workflow. OTA is the only viable approach for all radio test cases at mmWave frequencies.

How to Achieve Optimal Automotive Radar OTA Test Setup Alignment

Take a look at the best practices of OTA test setup alignment and calibration to achieve optimal measurement accuracy for radar sensor FoV testing.

Introducing Keysight's F9650A CATR OTA Chamber

An introduction to Keysight's F9650A compact antenna test range (CATR) for over-the-air (OTA) testing of wireless devices.

All Things 5G: OTA Measurement and Calibration

Hear from Rob Horansky of the National Institute of Standards and Technology (NIST) on what his organization is doing to improve over-the-air (OTA) measurement and calibration.

FieldFox N99 5G OTA 5GNR

5G Software short demos

5G Base Station Manufacturing: Yes, OTA Testing Can Be Done Cost-effectively

mmWave frequencies are particularly challenging for NEMs. They provide link budget issues due to higher power loss at these frequencies. They also create the need for OTA testing. NEMs can effectively address the challenges they generate by partnering with test and measurement experts