Keysight Webinars

Original Webinar Date: April 30, 2021

Support for bandwidth parts is an exciting new feature of 5G.   BWPs allow the UE to receive the highest resources during heavy loads or to receive minimal resources during periods of low usage. Join us as we demonstrate Keysight’s Test Application toolset and how to use it to test for this new capability.

Original Webinar Date: April 23, 2021

Now that 5G devices allow handovers between FR2 <-> FR1, testing for that capability during 5G device development and deployment is critical.  Join us for a demonstration of the 5G Test Application which provides key capabilities you will need to use, and get your questions answered.  You don’t want to miss this.

Original Webinar Date: April 16, 2021

Manually testing 5G devices for data throughput and battery life is time-consuming and costly, but there’s a better way.  Keysight’s Functional KPI Toolset is an automated approach that dramatically reduces and simplifies testing.

Original Webinar Date: April 16, 2021

Join Randy Becker and Norm Smith as they describe and demonstrate Keysight’s latest 5G NR Performance Multi-Band Vector Transceiver a non-signaling test solution for performance gNBs and Radio Units. They will be on hand to answer your questions. 

Original Webinar Date: April 8, 2021

Key learnings: 

• Explore the multi-dimensional 5G RAN challenges 
• Test massive MIMO with massive numbers of emulated UEs 
• Use the same UEE solution for testing FR1, FR2 and eCPRI based RAN architectures 

Original Webinar Date: March 25, 2021

Discover three new exclusive solutions for evaluating 5G devices prior to market introduction.  Validate your device performance against functional key performance indicators, beam management, and MIMO antenna performance across different spatial fading conditions and reproducing recorded field scenarios into a lab setup. 

Original Webinar Date: February 25, 2021

Join Javier Campos as he describes the different techniques 5G NR introduces in order to simultaneously use NR and LTE. He will cover the testing challenges and how you can use Keysight solutions for DSS testing and verification. 

Original Webinar Date: February 11, 2021

Hear from key industry leader Sergey Maximov and discover how MediaTek collaborated with Keysight to explore new 5G NR opportunities to speed up their time-to-market.  Sergey will discuss 3GPP Releases 15 and 16 as they relate to NR carrier aggregation and NR low-power features.

Original webinar date: June 3, 2021

Design for the Next-Generation of Reliable, High-Performance Memory Systems

 Learn about:

•  
• Trends and Market Challenges in Electronic Design Workflows
• What’s Next for DDR5 Memory and the Road to DDR6
• Northrop Grumman Case Study: Rigorous Design Analysis of a DDR4 DIMM-Based System 
• Introducing PathWave ADS 2022 for Next-Generation Memory

Original Webinar Date: May 27, 2021

Learn about the Most Advanced RF-Phased Array Design and Modeling Platform

 Learn about:

• Trends and Market Challenges in Electronic Design Workflows
• Escape Velocity – Using Modeling and Simulation to Enter a New Design Orbit
• Introducing PathWave System Design 2022

Original Webinar Date: May 25, 2021

Achieve Consistent RF Design Wins

Agenda:

•   Electronics Design Workflow Evolution
• RF and Microwave Industry Insights: Three Key Design Challenges
• PathWave Design 2022 for RF and Microwave

Original Webinar Date: April 22, 2021

This webinar introduces the next-generation WLAN standard, IEEE 802.11be, which is under development to achieve “extremely high throughput (EHT)” of at least 30 Gbps.  EHT is achieved by increasing the bandwidth up to 320 MHz, modulation up to 4096QAM, and a number of spatial streams up to 16. Because of the wider bandwidth and higher-order modulation schemes, engineers face new challenges in designing and testing their 802.11be components and devices.  Some of the physical (PHY) layer design and test challenges will be discussed, and Keysight measurement solutions will be presented.

Original broadcast date: December 17, 2020
Duration: 60 min.    

In this webinar, you will learn how to assemble and analyze multi-technology components to achieve design wins in this competitive market and see how RFPro 3DEM-circuit co-simulation is iteratively used during design tweaks; and not just as a final sign off verification before hardware fabrication.

Broadcast Date: November 18, 2020
Duration: 60 min.    

Interested to know how to replace IP1 and IP3 by spec compliant EVM for all the latest standard of wireless communications? In this webinar, you will learn how PathWave ADS will seamlessly use Keysight grade modulated sources, quickly compute EVM, improve your design vs system level metrics, assess improvements of PAs with embedded DPD algorithms, and also generate a representative model of your circuit to be handed over to your system teams for further comprehensive architecture analyses with PathWave System Design.

Original Broadcast Date: November 12, 2020
Duration: 60 min.    

Join us for a look at Keysight’s new Design Cloud user-experience for Electromagnetic Simulations in PathWave ADS 2021.  In this webinar, you will learn about the workflow, benefits, and performance expectations for a selection of RF/uW and Signal Integrity application examples. 

Furthermore, you will be introduced to our turn-key cloud solution partners, Nimbix, where you will see a live demonstration of PathWave ADS 2021 provisioning hardware on-the-fly on the Nimbix JARVICE platform.

Learn about new technologies, review industry trends, and get simulation tips anytime. Explore topics delivered by our simulation experts in these free webinars. 

View Tech Tips for our application-focused “How-To” videos. Only 10 mins each and you can download a workspace.