All Software Catalog

• Measure and analyze signals in the time, frequency, and modulation domains
• Support two different acquisition modes as synchronous (simultaneous) or sequenced for carrier aggregation or multiple measurements
• Analyze data from over 45 supported hardware instruments, or use in simulation tools to verify design
• Record the acquired signal waveforms to playback for troubleshooting
• Automate tests using .NET language or SCPI command
• Analog demodulation of AM, FM, PM signals
• Channel quality modulation analysis for group delay and channel response analysis
• Digital modulation analysis, custom IQ modulation analysis, and Flex Frame modulatio analysis
• TEDS modulation analysis
• Custom OFDM modulation analysis
• EVM improvement technologies with ccEVM and IQ-NC
• PowerSuite (ACP and SEM) measurements

• Perform measurements on the latest IEEE 802.11bn, 802.11be, 802.11ax, 802.11ac, and 802.11n formats
  
• Support 802.11bn/WiFi 8 for Ultra High Reliability based on 802.11be with new features including Extended Long Range PPDU, Expanded MCS, longer LDPC, Unequal QAM (UEQM), and Distributed RU (DRU)
• Cover all bandwidth options and modulation formats of BPSK up to 4096 QAM 
• Measurement results including EVM, constellation, SIG info, frequency response
• Support up to 8x8 MIMO and multi-user MIMO of 802.11ax, 802.11be and 802.11bn signals
• Display multiple color-coded result views simultaneously

The Keysight P7000A Base Station Measurement Automation Solution is an integrated software and hardware package intended for developing 3GPP Base Station Conformance, Performance, and Device Verification and Test (DVT) measurement systems.

The details for base station conformance testing are set by the 3rd Generation Partnership Project (3GPP) and are referenced in the latest version of the specifications 3GPP TS 38.141-1 and 3GPP TS 38.141-2.

These types of measurement systems require integrating a range of technical disciplines, including instrument and device control, system design and calibration, and technical standards expertise. The P7000A solution integrates standards-compliant measurements with state-of-the-art Keysight equipment which results in:

• Simplified Manufacturer’s Declaration Lists
• Test Plan Generation based on 3GPP requirements in both 38.141-1 and 38.141-2
• Integrated software/hardware solution for implementation of key 3GPP base station conformance measurements

• Reduced system development time
• Reduce maintenance costs
• Faster system integration time
• Reduced time to market

• 30-Day Free Trial for X-Series Measurement Applications
• Support 802.11be EHT 20/40/80/160/320 MHz signals to perform power, spectrum, and modulation measurements
• Support 802.11be MU PPDU compressed mode and preamble puncturing modulation analysis with modulation type up to 4096 QAM
• Support 802.11bn with UHR PHY PPDU, new MCS, longer blocked length codes for LDPC (2x), Distributed-tone Resource dRU), and Unequaled QAM (UQAM) 
• One-button measurements with pass/fail per the test limit definition
• Swept measurement with time-gated support: Channel Power, SEM, OBW, Monitor Spectrum, Spurious emission
• IQ measurements: IQ waveform, Power vs. Time, CCDF, spectrum flatness, and modulation analysis
• Modulation analysis with multiple result views: constellation diagram, EVM vs. symbol, EVM vs. subcarrier, Power vs. Symbol, Demod Bits, Numeric results, Burst and Sig Info (U-SIG, OFDM L-SIG), EHT-SIG (User Info, Common Field), Preamble Freq Error, IQ Impairment (Gain Imbalance and Quadrature Skew), User Information Summary
• Support cross-correlated EVM (ccEVM) and IQ-NC (Noise Correction)  technologies for EVM improvement
  
• Keysight supports tiered X-app models with N-models for UXA/PXA/PXE, E-models for MXA/EXA/MXE/VXT. The higher tiered X-app models can run at the lower platforms, which means N-models can run on all platforms, and E-models can only run on MXA/EXA/MXE/VXT.
  

• Create signals for 802.11 a/b/g/j/p/n, 802.11af, and 802.11ah
• Create signals for 802.11ac, and 802.11ax (up to 160 MHz, 1024 QAM and 8x8 MIMO)
• Create signals for 802.11be and 802.11bn (up to 320 MHz, 4096QAM, and 16x16 MIMO) 
• Create partially-coded signals for component test and fully-coded signals for receiver test
• KeysightCare software support subscription included
  

• Keysight 89601200C enables 89600 VSA software for advanced vector signal analysis and hardware connectivity without limits on center frequency, IF/BBIQ bandwidth, and upgrades up to 64 measurement channels and 512 parallel VSA instances. The software supports hardware connectivity with various analyzers (signal analyzer, network, oscilloscope, logic analyzer, transceivers, FieldFox, radio test sets, wireless test sets), source control, switches, and system calibrators (89600 VSA-supported hardware). It is compatible with VSA2025 U1 before or later releases.
  • Conduct time and frequency domain analysis with up to 409,601 points FFT; Provide flexible traces and displays with simultaneous and multi-measurements
  • Support analog demodulation of AM, FM, or PM signals
  • Support stimulus-response measurements like AM/AM, AM/PM, and gain compression for power amplifiers or mixers
  • Support advanced trigger with selectable level, slope, delay, and hold-off
  • Record the acquired signal waveforms for playback and troubleshooting
  • Make group delay measurements using a simple wideband multi-tone stimulus signal or Import/export the multi-tone stimulus definition from/to Keysight N7621B Signal Studio software, calibrating the input stimulus model with measured signal data, and performing simple and repeatable phase and magnitude channel response analysis 
  • Support synchronous (simultaneous) or sequenced acquisition mode for multiple measurements
  • Support RF system calibration up to 110 GHz using U9361x RCal Receiver Calibrator (Technical Overview)

• Support for split option 7.2x (O-RU categories A & B), compliant stimulus generation and response analysis, as well as measurement of O-RAN traffic over 10 Gbps / 25 Gbps /50 Gbps (fronthaul) Ethernet interfaces​
• Fully automated generation of Ethernet based O-RAN Control, User, Management and Synchronization-plane messages with eCPRI transport encapsulation types compliant with ORAN-WG4.CUS.0-v13.00​ and O-RAN.WG4.MP.0-R003-v13.00
  
• Out of the box integration with Keysight’s signal generation as well as VSA software for 5G NR and LTE standards.  ​
  
• Quick configuration and generation of 5G NR and LTE single or multi-carrier compliant FDD and TDD waveforms​
  
• Real-time FrameID generation and CRC Calculation​
  
• Analysis of both FR1 and FR2 radio downlink (DL) and uplink (UL) paths​
  
• Configuration of O-RAN Sections types and Section Extensions​
  
• Support for Beamforming​
  
• Support for M-plane configuration​
  
• Capture and accurate timestamping of O-RAN responses​
  
• Visualization and full decoding of O-RAN traces with flow-based filtering​
  

Open RAN Studio enables stimulus signal creation with easy capture, extraction, and export of IQ vectors – for advanced modulation analysis of received RF / mmWave signals to test O-RU performance. When combined with Keysight spectrum analyzers and signal sources, the integrated Open RAN Studio solution delivers the most comprehensive cross domain, multi-channel RF / mmWave and O-RAN protocol measurements available in the industry, for both FR1 and FR2 radios, downlink (DL) and uplink (UL) paths.

• Cross-correlated EVM is a technique used to extend the dynamic range of a receiver for best EVM performance
  
• Two receivers like oscilloscopes, PXI VXT, wireless test set, and X-series signal analyzers are used to capture and demodulate the same signal independently and perform cross-correlation on the error vectors to cancel out uncorrelated noise added by the receivers, resulting in a much lower EVM
• This technique causes the ccEVM value to primarily contain just the noise coming from the device under test (DUT)
• 89601EVMC option with VSA 2022 Update 1.0 release or beyond can enable accurate and best EVM performance of WLAN signals (requires WLAN 89601B7RC and/or 89601BHXC licenses)
• 89601EVMC option with VSA 2023 release or beyond can enable accurate and best EVM performance of 5G NR signals (requires 89601BHNC 5G NR license)
• 89601EVMC option with VSA 2023 Update 2.0 release or beyond can enable accurate and best EVM performance of Custom OFDM (requires 89601BHFC license) and Flex Frame (requires 89601AYAC license)
• 89601EVMC option with VSA 2024 release or beyond can enable accurate and best EVM performance of Satellite Communication for DVB-S/S2 (requires 89601DVBC license)

• 89601EVMC supports MIMO 2x2 and 4x4 signals in the 802.11n/ac/ax/be, Custom OFDM, and 5G NR measurements with VSA2024 release

• Real-time creation of multi-satellite signals for GPS (L1 with C/A code, L5I, L5Q), GLONASS constellations, Beidou (Compass), SBAS/QZSS with up to 40 channels, and Galileo (E1) with up to 16 channels for line-of-sight and multipath signals
• Dual-band GPS signal generation for L1C/A + L5I and/or L5Q which requires a secondary signal generator with a new license N7609EM1C
• Stationary or moving receivers for up to 24 hours using stored scenario files
• Create and edit custom scenario files or use continuous scenario generation mode
• Add impairments such as multipath, pseudo-range error, and CW interference signals in real-time while the signal is playing
• Create waveform files that simulate single or multi-satellite for GPS, GLONASS, Galileo, Beidou (Compass), SBAS, or QZSS for manufacturing test
  
• KeysightCare software support subscription included
  

Create 3GPP 5G NR and 5G-Advanced compliant signal for BTS and UE testing based

• Supports signal generation based on 3GPP Releases 15, 16, 17, and 18, including LDPC and Polar channel coding, as well as multi-antenna port configurations.
• Enables downlink channel generation for PBCH, PDSCH, and PDCCH, and uplink channels for PUSCH, PUCCH, and PRACH.
• Supports downlink signalcomponents including PSS, SSS, CSI-RS, PBCH-DMRS, PDSCH-DMRS, PDSCH-PTRS, PDCCH-DMRS and uplink signal components including SRS, PUSCH-DMRS, PUCCH-DMRS, and PUCCH-PTRS.
• Provides test model presets for FR1 and FR2 frequency ranges.
• Supports bandwidths from 3 to 100 MHz for FR1 and 50/100/200/400/800/1600/2000 MHz for FR2.
• Includes support for UL FRC configurations and full-filled UL/DL configurations.
• Enables configurations of multiple BWPs and mixed numerologies within a single carrier.
• Supports multi-user channel generation for both PUSCH and PDSCH.
• Allows flexible downlink and uplink configuration with customizable subframe allocations.
• Offers single-carrier and multi-carrier signal generation capabilities.
• Support real-time PUSCH HARQ and phase compensation (requires N5182B MXG/N5172B EXG option 660)

Keysight supports tiered PathWave signal generation models with N-model applications (N7631APPC with prefix "N") for high-performance HW platforms: M9484C VXG, M9384B VXG, and M9383B VXG-m, E-model applications (E7631APPC with prefix "E") for mid-range HW platform: N5186A MXG.

Higher-tiered models can run on lower tiered HW platforms, but not vice versa. For example, N7631APPC could run on MXG N5186A, but E7631APPC cannot run on M9484C VXG.

• Complies with 802.15.4 (BPSK or O-QPSK), 802.15.4/4z (HRP UWB), Z-Wave (ITU G.9959), and LoRa^TM CSS RF transmitter tests
• Provide one-button measurements with pass/fail per the standard
• Support spectrum and power measurements: channel power, adjacent carrier power (ACP), spectrum emission mask (SEM)
• Support modulation analysis measurement: various demodulation results with IQ measurement in time, frequency, polar, eye diagram, error vector, demod bits and decode results etc.
• Support multi-touch user interface and SCPI remote interface programming
• KeysightCare software support subscription included
  
• Keysight supports tiered application models with N-models for UXA/PXA/PXE, E-models for MXA/EXA/MXE/VXT, and W-models for CXA. The higher tiered application models can run at the lower platforms, which means N-models can run on all platforms, E-models can run on MXA/EXA/MXE/VXT and CXA, and W-models can only run on CXA