Here's the page we think you wanted. See search results instead:

Highlights

MultiGBASE-T1 Media Converter

The Keysight APM2000E enables you to convert the Ethernet physical layer from MultiGBASE-T1 to MultiGBASE-T.  

  • Utilizes the Marvel MV-Q3244 PHY for the 2.5/5/10GBASE-T1 physical layer.
  • Compliant with OPEN Alliance’s TC10 Automotive Ethernet Sleep/Wake-up requirements. 
  • Intuitive LED indicators:
    • PHY configuration, link status, and network activity 
    • Bar graph display of MultiGBASE-T1 Signal Quality Indicator (SQI) in real-time 
  • Membrane buttons enable device configuration without software: 
    • Switch between 2.5G, 5G, and 10G link speeds 
    • Select the MultiGBASE-T1 PHY clock configuration 
  • The converter uses the H-MTD connection system designed for MultiGBASE-T1.
  • Ruggedized USB Type-C connector for device configuration and firmware updates. 
  • Order APM2000E-CLK for external clock input. 

The APM2000E media converter is required for Automotive Ethernet MultiGBASE-T1 receiver testing with Keysight AE6920R software.   

Use with the following solution: AE6000R.

Key Specifications

View More

Extend the Capabilities of Your APM2000E 2.5 / 5 / 10BASE-T1 Media Converter 

See Related Software
See Related Accessories
See All Services
See All Support

Featured Resources

Data Sheets 2025.06.13

Automotive Ethernet MultiGBASE-T1 Receiver Test Compliance

Receiver tests ensure the quality of the digital transmission by measuring the receiver’s ability to recover data from an impaired input signal.

2025.06.13

White Papers 2026.08.03

Use Receiver Testing to Improve Automotive In-Vehicle Network Performance

The network within a vehicle carries signals from rear camera to center console display. Data must not be corrupted or changed by interference. To ensure this, engineers can test the components of the system in a repeatable way with standardized limits, fostering broad-scale interoperability.

2026.08.03

Keysight Introduces Comprehensive Physical Layer Receiver Test Solutions for MultiGbase-T1 Automotive Ethernet

Keysight has expanded its automotive Ethernet software portfolio to address automotive Ethernet multi-gigabit receiver tests to support the next technology wave for automotive in-vehicle networks.

View All Resources

Related Products

M8195A 65 GSa/s Arbitrary Waveform Generator

A high-speed arbitrary wave generator with up to 65 GSa/s sample rate and 25 GHz bandwidth on up to 4 channels per module.

AE6920R Automotive Ethernet MultiGBASE-T1 Receiver Test Compliance Software

The AE6920R Automotive Ethernet MultiGBASE-T1 Receiver (Rx) Test Software will help automate test procedures, ultimately ensuring interoperability for automotive in-vehicle networks.

AE6090A MultiGBASE-T1 Noise Injection Fixture

AE6090A is an automotive test fixture that provides a coupling connection to inject noise Automotive Ethernet 2.5 / 5 / 10GBASE-T1 receiver.

Automotive Adapter AE6960A SMA to H-MTD

AE6960A Automotive adapter provides a connection between your automotive Ethernet MDI and your measurement system, adapts between H-MTD to SMA.

Want help or have questions?

Contact us