Accessories

Embedded smart features

• Automatic amplitude correction and transfer of conversion loss data through USB plug and play features
• Automatic LO amplitude adjustment to compensate for cable loss (up to 3 m or 10 dB loss)
• Automatic detect mixer model/serial number when used with N9030A PXA, N9020A MXA, and N9010A EXA signal analyzer
     o  Automatic setting of the default frequency range and LO harmonic numbers
     o  Automatic LO alignment at start up      
     o  Automatic run calibration when time and temperature changes

Improved DANL and TOI

• Excellent conversion loss of 27 dB maximum and excellent amplitude accuracy

The Keysight M1970E 60 to 90 GHz waveguide harmonic mixer is an un-preselected mixer that will extend the operating frequency range of the N9030A PXA, N9020A MXA, and N9010A EXA signal analyzers up to 90 GHz. Smart features are embedded to help you to greatly simplify your overall test setup and improve the DANL and TOI of your test system. Go smart with harmonic mixing for your millimeter-wave applications.

 Embedded smart features:

• Automatic amplitude correction and transfer of conversion loss data through USB plug and play features
• Automatic LO amplitude adjustment to compensate for cable loss (up to 3 m or 10 dB loss)
• Vector correction data include magnitude and phase improving EVM measurement
• Automatic detect mixer model/serial number when used with N9040B UXA, N9030A PXA, N9020A MXA, and N9010A EXA signal analyzer

               - Automatic setting of the default frequency range and LO harmonic numbers

               - Automatic LO alignment at start up

               - Automatic run calibration when time and temperature changes

Improved DANL and TOI:

• Excellent conversion loss of 27 dB maximum and excellent amplitude accuracy

Keysight M1971E 55/60 to 90 GHz waveguide harmonic mixers is an un-preselected mixer provides a complete solution for wideband millimeter-wave signal analysis of more than 2 GHz with X-Series signal analyzers. Smart features are embedded to help you to greatly simplify your overall test setup and improve the DANL and TOI of your test system. Go smart with harmonic mixing for your millimeter-wave applications.

M1971E

Option 001 60 to 90 GHz Waveguide harmonic mixer
Option 003 55 to 90 GHz Waveguide harmonic mixer

Embedded smart features

• Automatic amplitude correction and transfer of conversion loss data through USB plug and play features
• Automatic LO amplitude adjustment to compensate the cables loss (up to 3 m or 10 dB loss)
• Automatic detect mixer model/serial number when used with N9030A PXA, N9020A MXA, and N9010A EXA signal analyzers
    o  Automatic setting of the default frequency range and LO harmonic numbers
    o  Automatic LO alignment at start up
    o  Automatic run calibration when time and temperature changes

Improved DANL and TOI

• Excellent conversion loss of 25 dB maximum and excellent amplitude accuracy

The Keysight M1970W 75 to 110 GHz waveguide harmonic mixer is an un-preselected mixer that will extend the operating frequency range of N9030A PXA, N9020A MXA, and N9010A EXA signal analyzers up to 110 GHz. Smart features are embedded to help you to greatly simplify your overall test setup and improve your DANL and TOI of your test system. Go smart with harmonic mixing for your millimeter-wave applications.

Embedded smart features

• Automatic amplitude correction and transfer of conversion loss data through USB plug and play features
• Automatic LO amplitude adjustment to compensate the cables loss (up to 3 m or 10 dB loss)

• Automatic detect mixer model/serial number when used with N9030A PXA, N9020A MXA, and N9010A EXA signal analyzers
     o  Automatic setting of the default frequency range and LO harmonic numbers
     o  Automatic LO alignment at start up 
     o  Automatic run calibration when time and temperature changes 

Improved DANL and TOI

• Excellent conversion loss of 23 dB maximum and excellent amplitude accuracy

The Keysight M1970V 50 to 75/80 GHz waveguide harmonic mixer is an un-preselected mixer that will extend the operating frequency range of the N9030A PXA, N9020A MXA, and N9010A EXA signal analyzers up to 80 GHz. Smart features are embedded to help you to greatly simplify your overall test setup and improve your DANL and TOI of your test system. Go smart with harmonic mixing for your millimeter-wave applications.

• Flat frequency response
• Low conversion loss
• No bias or tuning adjustments
• 100 mW safe input level

The Keysight 11970U waveguide mixer is a general-purpose harmonic mixer employing a dual-diode design to achieve flat frequency response and low conversion loss. These are achieved without external dc bias or tuning stubs. Manual operation and computer-controlled hardware operation are simplified because mixer bias and tuning adjustment are not required.

The 11970U extends the frequency range of the Keysight N9030A PXA high-performance signal analyzer to the U-band (40 to 60 GHz). It is also fully compatible with other Keysight spectrum analyzers including: the E4440A/46A/48A PSA (with Option AYZ), the E4407B ESA-E (with Option AYZ), the 856xEC, the 8566B (with a preamplifier), and the 7000 modular analyzer (with the 70907A/B external mixer interface module).

An external diplexer is required to connect the 11970U with the N9030A PXA (with Option EXM). The recommended diplexer can be purchased from Keysight as model number N9029BE13 or from Marki Microwave as DPXN-2-LF.

Contact your Keysight sales representative for ordering the N9029BE13.

• Flat frequency response
• Low conversion loss
• No bias or tuning adjustments
• 100 mW safe input level

The Keysight 11970W waveguide mixer is a general-purpose harmonic mixer employing a dual-diode design to achieve flat frequency response and low conversion loss. These are achieved without external dc bias or tuning stubs. Manual operation and computer-controlled hardware operation are simplified because mixer bias and tuning adjustment are not required.

The 11970W extends the frequency range of the Keysight N9030A PXA high-performance signal analyzer to the W-band (75 to 110 GHz). It is also fully compatible with other Keysight spectrum analyzers including: the E4440A/46A/48A PSA (with Option AYZ), the E4407B ESA-E (with Option AYZ), the 856xEC, the 8566B (with a preamplifier), and the 7000 modular analyzer (with the 70907A/B external mixer interface module).

An external diplexer is required to connect the 11970W with the N9030A PXA (with Option EXM). The recommended diplexer can be purchased from Keysight as model number N9029BE13 or from Marki Microwave as DPXN-2-LF.

Contact your Keysight sales representative for ordering the N9029BE13.

• Flat frequency response
• Low conversion loss
• No bias or tuning adjustments
• 100 mW safe input level

The Keysight 11970V waveguide mixer is a general-purpose harmonic mixer employing a dual-diode design to achieve flat frequency response and low conversion loss. These are achieved without external dc bias or tuning stubs. Manual operation and computer-controlled hardware operation are simplified because mixer bias and tuning adjustment are not required.

The 11970V extends the frequency range the Keysight N9030A PXA high-performance signal analyzer to the V-band (50 to 75 GHz). It is also fully compatible with other Keysight spectrum analyzers including: the E4440A/46A/48A PSA (with Option AYZ), the E4407B ESA-E (with Option AYZ), the 856xEC, the 8566B (with a preamplifier), and the 7000 modular analyzer (with the 70907A/B external mixer interface module).

An external diplexer is required to connect the 11970V with the N9030A PXA (with Option EXM). The recommended diplexer can be purchased from Keysight as model number N9029BE13 or from Marki Microwave as DPXN-2-LF.

Contact your Keysight sales representative for ordering the N9029BE13.

• Flat frequency response
• Low conversion loss
• No bias or tuning adjustments
• 100 mW safe input level

The Keysight 11970Q waveguide mixer is a general-purpose harmonic mixer employing a dual-diode design to achieve flat frequency response and low conversion loss. These are achieved without external dc bias or tuning stubs. Manual operation and computer-controlled hardware operation are simplified because mixer bias and tuning adjustment are not required.

The 11970Q extends the frequency range of the Keysight N9030A PXA high-performance signal analyzer to the Q-band (33 to 50 GHz). It is also fully compatible with other Keysight spectrum analyzers including: the E4440A/46A/48A PSA (with Option AYZ), the E4407B ESA-E (with Option AYZ), the 856xEC, the 8566B (with a preamplifier), and the 7000 modular analyzer (with the 70907A/B external mixer interface module).

An external diplexer is required to connect the 11970Q with the N9030A PXA (with Option EXM). The recommended diplexer can be purchased from Keysight as model number N9029BE13, or from Marki Microwave as DPXN-2-LF.

Contact your Keysight sales representative for ordering the N9029BE13.

• Flat frequency response
• Low conversion loss
• No bias or tuning adjustments
• 100 mW safe input level

The Keysight 11970A waveguide mixer is a general-purpose harmonic mixer employing a dual-diode design to achieve flat frequency response and low conversion loss. These are achieved without external dc bias or tuning stubs. Manual operation and computer-controlled hardware operation are simplified because mixer bias and tuning adjustment are not required.

The 11970A extends the frequency range of the Keysight N9030A PXA high-performance signal analyzer to the A-Band (26.5 to 40 GHz). It is also fully compatible with other Keysight spectrum analyzers including: the E4440A/46A/48A PSA (with Option AYZ), the E4407B ESA-E (with Option AYZ), the 856xEC, the 8566B (with a preamplifier), and the 7000 modular analyzer (with the 70907A/B external mixer interface module).

An external diplexer is required to connect the 11970A with the N9030A PXA (with Option EXM). The recommended diplexer can be purchased from Keysight as model number N9029BE13 or from Marki Microwave as DPXN-2-LF.

Contact your Keysight sales representative for ordering the N9029BE13.

• Flat frequency response
• Low conversion loss
• No bias or tuning adjustments
• 100 mW safe input level

The Keysight 11970K waveguide mixer is a general-purpose harmonic mixer employing a dual-diode design to achieve flat frequency response and low conversion loss. These are achieved without external dc bias or tuning stubs. Manual operation and computer-controlled hardware operation are simplified because mixer bias and tuning adjustment are not required.

The 11970K extends the frequency range of the Keysight spectrum analyzers to the K-Band (18 to 26.5 GHz). The compatible Keysight spectrum analyzers include: the E4440A/E4446A/E4448A PSA (with Option AYZ), the E4407B ESA-E (with Option AYZ), the 856xEC, the 8566B (with a preamplifier), and the 7000 modular analyzer (with the 70907A/B external mixer interface module).

The 11970K is not compatible with the N9030A PXA signal analyzer.

Embedded Smart Features:

• Automatic amplitude correction and transfer of conversion loss data through USB plug and play features
• Automatic LO amplitude adjustment to compensate for cable loss (up to 3 m or 10 dB loss)
• Vector correction data includes magnitude and phase improving EVM measurement
• Automatically detect mixer model/serial number when used with N9040B UXA, N9030A/B PXA, N9020A/B MXA, and N9010A/B EXA signal analyzers
  - Automatic setting of the default frequency range and LO harmonic numbers
  - Automatic LO alignment at start up
  - Automatic run calibration when time and temperature changes

Improved DANL and TOI:

• Excellent conversion loss of 27 dB maximum and excellent amplitude accuracy.

Keysight M1971W 75 to 110 GHz waveguide harmonic mixer is an un-preselected mixer that provides a complete solution for wideband millimeter-wave signal analysis of more than 2 GHz with X-Series signal analyzers. Embedded smart features help you to greatly simplify your overall test setup and improve the DANL and TOI of your test system. Go smart with harmonic mixing for your millimeter-wave applications.

Embedded smart features:

• Automatic amplitude correction and transfer of conversion loss data through USB plug and play features
• Automatic LO amplitude adjustment to compensate for cable loss (up to 3 m or 10 dB loss)
• Vector correction data includes magnitude and phase improving EVM measurement
• Automatically detect mixer model/serial number when used with N9040B UXA, N9030A/B PXA, N9020A/B MXA, and N9010A/B EXA signal analyzers
  - Automatic setting of the default frequency range and LO harmonic numbers
  - Automatic LO alignment at startup
  - Automatic run calibration when time and temperature changes

Improved DANL and TOI:

• Excellent conversion loss of 27 dB maximum and excellent amplitude accuracy

Keysight M1971V 50 to 75 GHz waveguide harmonic mixer is an un-preselected mixer that provides a complete solution for wideband millimeter-wave signal analysis of more than 2 GHz with X-Series signal analyzers. Embedded smart features help you to greatly simplify your overall test setup and improve the DANL and TOI of your test system. Go smart with harmonic mixing for your millimeter-wave applications.