SL106XX Series Scienlab Measurement & Control Module

Precise results, even with challenging measurement tasks

Buy / Quote

Already own this product? View Technical Support

Highlights

Specifications

Models

Software, Services, Support

Highlights

Meet the SL106XX Measurement & Control Module Series

The Scienlab SL106XX Series covers a wide range of test, measurement, and control tasks. If required, you can combine your measurement task and scope.

They are ideal for carrying out challenging measurement tasks, even under difficult environmental conditions; for example, a climate chamber. The modules offer top quality, robustness, and easy and intuitive operation.

Precise, reproducible, and time-synchronous measurement data recording
Fully electrically isolated measurement channels up to 1,000 V insulated between each channel

Connection via open Ethernet interface; automatic detection of Scienlab Energy Storage Discover (ESD) software
Individual combination of different measurement module types

View Data Sheet

High Performance for All Your Applications

The SL106XX Series has modules with analog measurement inputs for voltages, temperature sensors, and a digital I/O module for recording and switching digital signals.

A communication interface enables the integration of various Fieldbus systems like CAN, FlexRay, or XCP
The Measurement & Controle Module (MCM) Terminal Control provides adjustable voltage outputs for Scienlab Battery Management Systems (BMS) and device under test (DUT) power supply as well as floating relay contacts to simulate terminals 15, 30, and more
Easy integration into the Scienlab Energy Storage Discover (ESD) or the customer's software

Scienlab Measurement & Control Module side view

Drive the Future of E-Mobility

Accelerate the development and validation of batteries with Keysight’s Scienlab Battery Test Solutions. From cell chemistry to battery pack Keysight’s holistic approach is your key to success:

Battery Test Systems for cell, module and pack
Intuitive and powerful test software Energy Storage Discover
Optimize your test workflows with PathWave Lab Operations for Battery Test
Benefit from Keysight’s global service and support

Key Specifications

Synchronized Time Stamp

Data acquisition with a synchronized time stamp in accordance with the precision time protocol (PTP)

Integration

Use with Scienlab Energy Storage Discover (ESD) software or the customer's software

High Insulation Strength

Up to 1,000 V for safe working conditions

Customizable Data Rate

Parameters are freely programmable

Find the Model that's Right for You

SL1060A

Measurement & Control Module Voltage – Input ±10 V

Starting from

The Measurement & Control Module SL1060A is a mobile measurement module for measuring voltage input ±10 V with 16 channels. The module can be used either as a stand-alone device or as extension for a Scienlab Battery Test System.

SL1062A

Measurement & Control Module Voltage – Thermocouple Type K

Starting from

The Measurement & Control Module SL1062A is portable temperature measuring module for record thermocouple - temperature sensors of type K for a temperature range of -100 to +1300 °C and with 16 channels. The module can be used either as a stand-alone device or as extension for a Scienlab Battery Test System.

SL1063B

Measurement & Control Module Voltage – Digital I/O

Starting from

The Measurement & Control Module SL1063B is a rack-mount measuring and control module for measuring and switching of digital signals with 16 digital in-/output channels. The module can be used either as a stand-alone device or as extension for a Scienlab Battery Test System.

SL1064B

Measurement & Control Module Voltage – Communication Interface Module

Starting from

The Measurement & Control Module SL1064B is a rack-mount gateway for CAN- and LIN-buses with up to 6 channels. It can be used as a configurable communication interface between Scienlab Battery Test Systems and devices under test (especially their BMS) as well as additional components using CAN communication.

SL1065B

Precise results, even with challenging measurements tasks

Starting from

The Scienlab Measurement & Control Module SL1065B – Analog Input is a rack-mount measuring and control module for measuring voltages and currents (e.g. single cell voltages in battery modules or packs). It features fully galvanically isolated measurement inputs and records all measured values synchronously and with common time stamps by Precision Time Protocol (PTP).

SL1066A

Measurement & Control Module Voltage – Terminal Control Module – 8 Channels

Starting from

The Measurement & Control Module SL1066A is mobile measuring and control module which provides adjustable voltage outputs for BMS and DUT power supply and floating relay contacts to simulate e.g. vehiclespecific terminals 15, 30 and 31.

SL1066B

Measurement & Control Module Voltage – Terminal Control Module – 4 Channels

Starting from

The Measurement & Control Module SL1066B is a rack-mount measuring and control module which provides adjustable voltage outputs for BMS and DUT power supply and floating relay contacts to simulate e.g. vehiclespecific terminals 15, 30 and 31.

SL1067B

Measurement & Control Module Voltage – Analog Input

Starting from

The Measurement & Control Module SL1067B is a rack-mount measurement module for measuring voltage input ±10 V with 16 channels. The module can be used either as a stand-alone device or as extension for a Scienlab Battery Test System.

SL1068B

Measurement & Control Module Voltage – Analog Output

Starting from

The Measurement & Control Module SL1068B is a rack-mount measurement module which provides voltage outputs for analog signaling – useful e.g. for the emulation of temperature sensors or the controlling of regulation vents with voltage input with 8 channels. The module can be used either as a stand-alone device or as extension for a Scienlab Battery Test System.