Accessories

Type

Superior RF Performance

• Isolation: > 100 dB to 4 GHz
• Insertion loss: < 0.2 dB to 2 GHz, < 0.25 dB to 4 GHz

Features

The Keysight 8762A offers excellent electrical and mechanical performance with the broadband operation, high isolation, low SWR, long life, and exceptional repeatability.

Buy only the performance you need! Keysight offers a new line of latching coaxial switches that combine legendary reliability with the widest range of performance options available today. Learn more at N1810TL Coaxial Switch
 

• SP4T configuration
• Magnetic latching
• Typical Insertion Loss repeatability of 0.03 dB
• Excellent isolation, typically > 90 dB to 26.5 GHz
• Opto-electronic indicators and interrupts
• Terminated ports
• TTL/5V CMOS compatible (optional)

The Keysight 87104C multiport switch improves insertion loss repeatability and isolation, which is necessary for higher-performance test systems. The repeatability and reliability of this switch is vital to ATS measurement accuracy and can cut the cost of ownership by reducing calibration cycles and increasing test system uptime. The Keysight 87104C terminated multiport switch provides the long life and reliability required for automated test and measurement, signal monitoring, and routing applications. Highly repeatable switching capability is made possible through Keysight's rigorous design and tight manufacturing specifications. Low insertion loss repeatability reduces sources of random errors in the measurement path, which improves measurement accuracy.

Note: Option 024 and 161 are default options unless specified otherwise.

Type

• Unterminated 5-port switch
• Female SMA connectors
• Built-in current interrupt

Superior RF Performance

• Superior isolation: > 120 dB at 4 GHz and 70 dB at 26.5 GHz
• Low SWR: < 1.10 at 4 GHz and 1.60 at 26.5 GHz
• Low insertion loss: < 0.27 dB at 4 GHz and 0.80 dB at 26.5 GHz

Excellent RF Repeatability And Long Life Span

• Excellent insertion loss repeatability: 0.03 dB to 1 million cycles and 0.1 dB to 2 million cycles
• Long operating life of 2 million cycles

Features

• Coil voltage levels 5 V, 15 V or 24 V
• D-subminiature 9-pin connectors or solder lug terminals
• Standard or TTL/5 V CMOS compatible drive
• Optional position indicators

The Keysight N1812UL latching coaxial switch combines unmatched flexibility of configuration with excellent repeatability, long life, and reliability.

For additional information regarding configuration options and performance tradeoffs view the online product overview.

Learn more about Keysight Single-Pole Double-Throw Switches - SPDT

Type

• Terminated 4-port bypass switch
• Female SMA connectors
• Built-in current interrupt

Superior RF Performance

• Superior isolation: > 120 dB at 4 GHz and 70 dB at 26.5 GHz
• Low SWR: < 1.10 at 4 GHz and 1.60 at 26.5 GHz
• Low insertion loss: < 0.27 dB at 4 GHz and 0.80 dB at 26.5 GHz

Excellent RF Repeatability And Long Life Span

• Excellent insertion loss repeatability: 0.03 dB to 1 million cycles and 0.1 dB to 2 million cycles
• Long operating life of 2 million cycles

Features

• Coil voltage levels 5 V, 15 V or 24 V
• D-subminiature 9-pin connectors or solder lug terminals
• Standard or TTL/5 V CMOS compatible drive
• Optional position indicators

The Keysight N1811TL latching coaxial switch combines unmatched flexibility of configuration with excellent repeatability, long life, and reliability.

For additional information regarding configuration options and performance tradeoffs view the online product overview.

Learn more about Keysight Single-Pole Double-Throw Switches - SPDT

Type

• Unterminated single pole double throw EM switch
• Operating frequency from DC to 4, 20, 26.5, 40, 50 or 67 GHz
• Female SMA connectors
• Built-in current interrupt

Superior RF Performance

• Superior isolation: > 120 dB at 4 GHz and 70 dB at 26.5 GHz
• Low SWR: < 1.10 at 4 GHz and 1.60 at 26.5 GHz
• Low insertion loss: < 0.27 dB at 4 GHz and 0.80 dB at 26.5 GHz

Excellent RF repeatability & long life span

• Excellent insertion loss repeatability: 0.03 dB to 1 million cycles and 0.1 dB to 2 million cycles
• Long operating life of 2 million cycles

Features

• Coil voltage levels 5 V, 15 V or 24 V
• D-subminiature 9-pin connectors or solder lug terminals
• Standard or TTL/5 V CMOS compatible drive
• Optional position indicators

The Keysight N1810UL latching coaxial switch combines unmatched flexibility of configuration with excellent repeatability, long life, and reliability.

For additional information regarding configuration options and performance tradeoffs view the online product overview.

Type

• Terminated single pole double throw EM switch
• Operating frequency from DC to 4, 20, 26.5, 40, 50 or 67 GHz
• Female SMA connectors
• Built-in current interrupt

Superior RF Performance

• Superior isolation: > 120 dB at 4 GHz and 70 dB at 26.5 GHz
• Low SWR: < 1.10 at 4 GHz and 1.60 at 26.5 GHz
• Low insertion loss: < 0.27 dB at 4 GHz and 0.80 dB at 26.5 GHz

Excellent RF repeatability & long life span

• Excellent insertion loss repeatability: 0.03 dB to 1 million cycles and 0.1 dB to 2 million cycles
• Long operating life of 2 million cycles

Features

• Coil voltage levels 5 V, 15 V or 24 V
• D-subminiature 9-pin connectors or solder lug terminals
• Standard or TTL/5 V CMOS compatible drive
• Optional position indicators

The Keysight N1810TL latching coaxial switch combines unmatched flexibility of configuration with excellent repeatability, long life, and reliability.

For additional information regarding configuration options and performance tradeoffs view the online product overview.
 

• SP4T configuration
• Operating life of 10 million cycles
• Guaranteed repeatability of 0.03 dB up to 5 million cycles
• Excellent isolation, 100 dB minimum 12 GHz
• Magnetic latching
• Terminated ports
• Self interrupting drive circuit
• Fully compatible with Keysight 87130A/70611A and 11713B/C attenuator/switch drivers

The Keysight 87204C terminated multiport switch provides the life and reliability required for automated test and measurement, signal monitoring and routing applications. Innovative design and careful process control created the Keysight 87204C which meet the requirements for highly repeatable switching elements in test instruments and switching interfaces. The Keysight 87204C is designed to operate for more than 10 million cycles. The exceptional 0.03 dB insertion loss repeatability is warranted for 5 million cycles at 25° C. This reduces sources of random errors in the measurement path and improves measurement uncertainty. Switch life is a critical consideration in production test systems, satellite and antenna monitoring systems, and test instrumentation. The longevity of this switch increases system uptime, and lowers the cost of ownership by reducing calibration cycles and switch maintenance.

Note: Option 161 is default option unless specified otherwise.

Route Multiple Channels to a Single Point

The M9101A, a high-density, 64-channel PXI multiplexer routes many different channels to a single point. The switches operate in a break-before-make mode that ensures no two points are connected at the same time or, if needed multiple channels can connect simultaneously. Ideal for routing multiple analog signals to a measurement device in automated test environment (ATE) or data acquisition systems. Each channel switches a high and a low for 2-wire switching up to 100Vrms, with up to 10W of power. Connection options include the durable connector block or the standard cable connections.

Application

• Switch many different points to a single instrument for data acquisition and automated test applications

Performance characteristics

• High-speed 500 usec reed relays
• Break-before-make or simultaneous switch closures

Functionality

• 64-channel, high-density 2-wire switch multiplexer
• 100Vrms
• 0.5A/1.0A switch/carry current
• 10W max power
• Software drivers: Visual Studio^®, C, C++, C#, Visual Basic, MATLAB^® and LabVIEW™

Type

• SP4T configuration
• Terminated ports
• Magnetic latching

Superior RF Performance

• Excellent isolation, typically > 110 dB at 4 GHz
• Unmatched VSWR < 1.2 at 4 GHz

Features

• Opto-electronic indicators and interrupts
• TTL/5V CMOS compatible (optional)

The Keysight 87104A multiport switch improves insertion loss repeatability and isolation, which is necessary for higher-performance test systems. The repeatability and reliability of this switch are vital to ATS measurement accuracy and can cut the cost of ownership by reducing calibration cycles and increasing test system uptime. The Keysight 87104A terminated multiport switch provides the long life and reliability required for automated test and measurement, signal monitoring, and routing applications. Highly repeatable switching capability is made possible through Keysight's rigorous design and tight manufacturing specifications. Low insertion loss repeatability reduces sources of random errors in the measurement path, which improves measurement accuracy.

Learn more about RF and Microwave Electromechanical Switches

Features

• SP4T configuration, terminated
• Electronic position indicator
• Current interrupt capability
• Magnetic latching

Superior RF Performance

• Unmatched isolation, typically 90 dB minimum
• Operating life of 5 million cycles, typical
• Guaranteed repeatability of 0.03 dB up to 2 million cycles

The Keysight L7104A multiport switch improves accuracy in signal RF and microwave signal routing and testing applications. This economically-priced, electro-mechanical switch provides unmatched isolation and a 0.03 dB insertion loss repeatability, which is warranted for the 2-million life cycle of the switch. The L7104A’s low insertion loss repeatability reduces sources of random errors in the measurement path, which improves measurement accuracy. The repeatability and reliability of this switch guarantee measurement accuracy and can cut the cost of ownership by reducing calibration cycles and increasing test system up time. Highly repeatable switching capability is made possible through Keysight's rigorous design and tight manufacturing specifications.

Ideal for manufacturing test engineers working on system integration, the Keysight L7104A terminated multiport switch provides an economically-priced, reliable solution for signal monitoring, and routing applications.

Note: Option 024 and 161 are default options unless specified otherwise.

Features

• SP4T configuration, terminated
• Electronic position indicator
• Current interrupt capability
• Magnetic latching

Superior RF Performance

• Unmatched isolation, typically 90 dB at 12 GHz
• Operating life of 5 million cycles, typical
• Guaranteed repeatability of 0.03 dB up to 2 million cycles

The Keysight L7104B multiport switch improves accuracy in signal RF and microwave signal routing and testing applications. This economically-priced, electro-mechanical switch provides unmatched isolation and a 0.03 dB insertion loss repeatability, which is warranted for the 2-million life cycle of the switch. The L7104B’s low insertion loss repeatability reduces sources of random errors in the measurement path, which improves measurement accuracy. The repeatability and reliability of this switch guarantee measurement accuracy and can cut the cost of ownership by reducing calibration cycles and increasing test system up time. Highly repeatable switching capability is made possible through Keysight's rigorous design and tight manufacturing specifications.

Ideal for manufacturing test engineers working on system integration, the Keysight L7104B terminated multiport switch provides an economically-priced, reliable solution for signal monitoring, and routing applications.

Note: Option 024 and 161 are default options unless specified otherwise.

Features

• configuration is SP6T, unterminated
• electronic position indicator
• current interrupt capability
• magnetic latching

Superior RF Performance

• isolation at 90 dB at 12 GHz
• operating life at five million cycles
• repeatability at 0.03 dB up to two million cycles

The Keysight L7206B unterminated multiport switch improves accuracy in signal RF and microwave signal routing and testing applications. This  electromechanical switch provides isolation and a 0.03 dB insertion loss repeatability. The warranty for the L7206B unterminated multiport switch is for two million life cycles.

The L7206B’s low insertion loss repeatability improves measurement accuracy by reducing sources of random errors in the measurement path. The repeatability and reliability of this switch guarantees measurement accuracy and reduces the cost of ownership by reducing calibration cycles and increasing test system up time. 

Ideal for manufacturing test engineers working on system integration, the L7206B unterminated multiport switch provides a reliable solution for signal monitoring and routing applications.

Note: Keysight Option 024 and Option 161 are default options unless specified otherwise.