Accessories

• Allows switching of multiple signals without physically changing the connections, which reduces test time and increases throughput
• Works with the Keysight Infiniium Series compliance application framework where switch support is enabled
• Reduces cost of test and ensures reliability of the test system with a guaranteed operating life of 5 million cycles (10 million cycles typical)

The Keysight U3020AS26 is a switch matrix that consists of two single-pole-six-throw (SP6T) switches. It allows switching of multiple signal paths without physically changing the connections. This enables you to perform multiple tests with the same setup, eliminating frequent connects and disconnects. Automate the entire testing process to increase throughput in high-volume production environments.

Type

Superior RF Performance

• Isolation: > 100 dB to 4 GHz
• Insertion loss: < 0.2 dB to 2 GHz, < 0.25 dB to 4 GHz

Features

The Keysight 8762A offers excellent electrical and mechanical performance with the broadband operation, high isolation, low SWR, long life, and exceptional repeatability.

Buy only the performance you need! Keysight offers a new line of latching coaxial switches that combine legendary reliability with the widest range of performance options available today. Learn more at N1810TL Coaxial Switch
 

• SP4T configuration
• Magnetic latching
• Typical Insertion Loss repeatability of 0.03 dB
• Excellent isolation, typically > 90 dB to 26.5 GHz
• Opto-electronic indicators and interrupts
• Terminated ports
• TTL/5V CMOS compatible (optional)

The Keysight 87104C multiport switch improves insertion loss repeatability and isolation, which is necessary for higher-performance test systems. The repeatability and reliability of this switch is vital to ATS measurement accuracy and can cut the cost of ownership by reducing calibration cycles and increasing test system uptime. The Keysight 87104C terminated multiport switch provides the long life and reliability required for automated test and measurement, signal monitoring, and routing applications. Highly repeatable switching capability is made possible through Keysight's rigorous design and tight manufacturing specifications. Low insertion loss repeatability reduces sources of random errors in the measurement path, which improves measurement accuracy.

Note: Option 024 and 161 are default options unless specified otherwise.

Type

• Unterminated 5-port switch
• Female SMA connectors
• Built-in current interrupt

Superior RF Performance

• Superior isolation: > 120 dB at 4 GHz and 70 dB at 26.5 GHz
• Low SWR: < 1.10 at 4 GHz and 1.60 at 26.5 GHz
• Low insertion loss: < 0.27 dB at 4 GHz and 0.80 dB at 26.5 GHz

Excellent RF Repeatability And Long Life Span

• Excellent insertion loss repeatability: 0.03 dB to 1 million cycles and 0.1 dB to 2 million cycles
• Long operating life of 2 million cycles

Features

• Coil voltage levels 5 V, 15 V or 24 V
• D-subminiature 9-pin connectors or solder lug terminals
• Standard or TTL/5 V CMOS compatible drive
• Optional position indicators

The Keysight N1812UL latching coaxial switch combines unmatched flexibility of configuration with excellent repeatability, long life, and reliability.

For additional information regarding configuration options and performance tradeoffs view the online product overview.

Learn more about Keysight Single-Pole Double-Throw Switches - SPDT

Type

• Terminated 4-port bypass switch
• Female SMA connectors
• Built-in current interrupt

Superior RF Performance

• Superior isolation: > 120 dB at 4 GHz and 70 dB at 26.5 GHz
• Low SWR: < 1.10 at 4 GHz and 1.60 at 26.5 GHz
• Low insertion loss: < 0.27 dB at 4 GHz and 0.80 dB at 26.5 GHz

Excellent RF Repeatability And Long Life Span

• Excellent insertion loss repeatability: 0.03 dB to 1 million cycles and 0.1 dB to 2 million cycles
• Long operating life of 2 million cycles

Features

• Coil voltage levels 5 V, 15 V or 24 V
• D-subminiature 9-pin connectors or solder lug terminals
• Standard or TTL/5 V CMOS compatible drive
• Optional position indicators

The Keysight N1811TL latching coaxial switch combines unmatched flexibility of configuration with excellent repeatability, long life, and reliability.

For additional information regarding configuration options and performance tradeoffs view the online product overview.

Learn more about Keysight Single-Pole Double-Throw Switches - SPDT

Type

• Unterminated single pole double throw EM switch
• Operating frequency from DC to 4, 20, 26.5, 40, 50 or 67 GHz
• Female SMA connectors
• Built-in current interrupt

Superior RF Performance

• Superior isolation: > 120 dB at 4 GHz and 70 dB at 26.5 GHz
• Low SWR: < 1.10 at 4 GHz and 1.60 at 26.5 GHz
• Low insertion loss: < 0.27 dB at 4 GHz and 0.80 dB at 26.5 GHz

Excellent RF repeatability & long life span

• Excellent insertion loss repeatability: 0.03 dB to 1 million cycles and 0.1 dB to 2 million cycles
• Long operating life of 2 million cycles

Features

• Coil voltage levels 5 V, 15 V or 24 V
• D-subminiature 9-pin connectors or solder lug terminals
• Standard or TTL/5 V CMOS compatible drive
• Optional position indicators

The Keysight N1810UL latching coaxial switch combines unmatched flexibility of configuration with excellent repeatability, long life, and reliability.

For additional information regarding configuration options and performance tradeoffs view the online product overview.

Type

• Terminated single pole double throw EM switch
• Operating frequency from DC to 4, 20, 26.5, 40, 50 or 67 GHz
• Female SMA connectors
• Built-in current interrupt

Superior RF Performance

• Superior isolation: > 120 dB at 4 GHz and 70 dB at 26.5 GHz
• Low SWR: < 1.10 at 4 GHz and 1.60 at 26.5 GHz
• Low insertion loss: < 0.27 dB at 4 GHz and 0.80 dB at 26.5 GHz

Excellent RF repeatability & long life span

• Excellent insertion loss repeatability: 0.03 dB to 1 million cycles and 0.1 dB to 2 million cycles
• Long operating life of 2 million cycles

Features

• Coil voltage levels 5 V, 15 V or 24 V
• D-subminiature 9-pin connectors or solder lug terminals
• Standard or TTL/5 V CMOS compatible drive
• Optional position indicators

The Keysight N1810TL latching coaxial switch combines unmatched flexibility of configuration with excellent repeatability, long life, and reliability.

For additional information regarding configuration options and performance tradeoffs view the online product overview.
 

• Repeatability: ±0.01 dB (1550 nm); ±0.02 dB (1310 nm)
• Lifetime: > 1 billion cycles
• 1250 nm to 1650 nm operating wavelength range
• FC/APC connector interfaces - angled, narrow key

The Keysight N773-C family of single-mode fiber-optic switches are an indispensable tool to automate photonic test solutions. Based on optical micro-electro-mechanic systems (MEMS) technology, those switches use tiny mirrors to guide the light to the desired output. MEMS based optical switches offer outstanding durability, repeatability, and fast switching times. Optical switches help avoid uncertainties introduced by fiber movement or by connector wear, and offer higher repeatability than manual re-connecting.

The new switch generation sports an on-board graphical user interface for easy control without software installation, accessible via GbE LAN and USB 2.0 connections. It comes in three topologies covering typical applications requiring 1x4 or 1x16 or 2x2 configurations.

The N7733C is a 1x16 switch, ideal to connect a device under test with up to 16 ports, or to measure up to 15 devices while using one port as a reference path.

• SP10T configuration, magnetic latching, terminated ports
• opto-electronic indicator and current interrupts
• superior isolation and voltage standing wave ratio (VSWR)
• TTL/5V CMOS compatible (optional)

The U7110C, DC to 26.5 GHz, SP10T multiport switch offers superior RF performance, which is necessary for higher performance test systems. The repeatability and reliability of this switch is vital to ATS measurement accuracy. With up to 10 RF ports, it can reduce the cost of ownership by reducing calibration cycles and allows multi-DUT or multi-channel DUT testing at the same time. The U7110C provides the long life and reliability required for automated test and measurement, signal monitoring, and routing applications. Highly repeatable switching capability is made possible through Keysight's rigorous design and tight manufacturing specification involving the test run of every single cycle of the switch, which ensures that RF performance is met.

• SP10T configuration, magnetic latching, terminated ports
• Opto-electronic indicator and current interrupts
• Superior isolation and VSWR
• TTL/5V CMOS compatible (optional)

The Keysight U7110B, DC to 20 GHz, SP10T multiport switch offers superior RF performance, which is necessary for higher performance test systems. The repeatability and reliability of this switch is vital to ATS measurement accuracy and with the number of RF ports up to 10-ports, it can cut the cost of ownership by reducing calibration cycles and allows multi-DUT or multi-channel DUT testing at the same time. The Keysight U7110B terminated multiport switch provides the long life and reliability required for automated test and measurement, signal monitoring, and routing applications. Highly repeatable switching capability is made possible through Keysight's rigorous design and tight manufacturing specification involving the test run of every single cycle of the switch ensuring RF performance are met.

• SP10T configuration, magnetic latching, terminated ports
• Opto-electronic indicator and current interrupts
• Superior isolation and VSWR
• TTL/5V CMOS compatible (optional)

The Keysight U7110A, DC to 9 GHz, SP10T multiport switch offers superior RF performance, which is necessary for higher performance test systems. The repeatability and reliability of this switch is vital to ATS measurement accuracy and with the number of RF ports up to 10-ports, it can cut the cost of ownership by reducing calibration cycles and allows multi-DUT or multi-channel DUT testing at the same time. The Keysight U7110A terminated multiport switch provides the long life and reliability required for automated test and measurement, signal monitoring, and routing applications. Highly repeatable switching capability is made possible through Keysight's rigorous design and tight manufacturing specification involving the test run of every single cycle of the switch ensuring RF performance are met.

• SP8T configuration, magnetic latching, terminated ports
• Opto-electronic indicator and current interrupts
• Superior isolation and VSWR
• TTL/5V CMOS compatible (optional)

The Keysight U7108C, DC to 26.5 GHz, SP8T multiport switch offers superior RF performance, which is necessary for higher performance test systems. The repeatability and reliability of this switch is vital to ATS measurement accuracy and with the number of RF ports up to 8-ports, it can cut the cost of ownership by reducing calibration cycles and allows multi-DUT or multi-channel DUT testing at the same time. The Keysight U7108C terminated multiport switch provides the long life and reliability required for automated test and measurement, signal monitoring, and routing applications. Highly repeatable switching capability is made possible through Keysight's rigorous design and tight manufacturing specification involving the test run of every single cycle of the switch ensuring RF performance are met.