Choose a country or area to see content specific to your location

Computer Aided Engineering

Electronic Design Automation

Engineering Data Management

Optical Design Engineering

Software Quality Engineering

All Design Engineering Software

Oscilloscopes Sampling Oscilloscopes Digital Multimeters BERTs, Digitizers, and DAQs Digital Protocol Analyzers Waveform and Function Generators

Photonic and Optical Test Quantum Design and Test

AC Power Supplies DC Power Supplies DC Electronic Loads Power Analyzers Source Measure Units

LCR Meters and Impedance Analyzers Signal, Spectrum, and Wireless Analyzers Noise Figure and Phase Noise Analyzers Signal Sources RF Vector Transceivers Vector Network Analyzers RF Power Meters

Ethernet Traffic Emulation Network Emulators Interconnect Test

Channel Emulators UE, RAN, and Core Emulators Cellular Device Testing Over-the-Air Testing WLAN and IoT Testing Position, Navigation, and Timing

Automotive EV Emulators Autonomous Drive Testing Automotive Communications Testing

Security Attack Emulation Security Device Testing Vulnerability Assessment

All Instrument Software

Network Visibility Equipment

Network and Applications Monitoring

Network Service Assurance

Semiconductors

In-Circuit Test For Manufacturing

Support Services

Managed Services

Financial Alternatives

All Services

All Modular Instruments

Instrument Accessories

Part Number Lookup

All Products
Analyze Complex RF Signals Faster

Explore dual-channel and ultra-wideband signal analysis for demanding RF workflows.

Explore Now

Digital Validation. Faster.

Get faster, clearer insights with our new multicore, 12-bit oscilloscope up to 33 GHz. Trade in your old oscilloscope and get credit toward a new XR8.

Learn More

Integrated Physics Suite

Bridging design and physical testing to evaluate drop, impact, shock, and vibration compliance before hardware exists.

Learn More

Buy an Expert Oscilloscope, Boost Your Bandwidth

Unlock your free upgrade to the next bandwidth tier.

Learn More

End-to-End Validation for AI Data Center

Strengthen 1.6T network reliability for AI-scale workloads from transceivers to interconnects.

Learn More

Take On Complex MIMO Signals

Pair Keysight VSA software with the new XA5 signal analyzer for advanced visualization, demodulation, and analysis — start your 30-day trial today.

Explore Now

Introducing AI-Enhanced Packet Brokers

With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.

Explore Now

Accelerate Semiconductor Innovation

Explore end-to-end workflows spanning IC design, validation, wafer test, and photonics.

Explore Workflows

Accelerate Your Innovation Engine

Explore curated support plans, prioritized to keep you innovating at speed.

Explore KeysightCare

448 Gb/s Waveform Generation

Achieve 200+ Gbaud multi-level modulated signals with high-speed AWGs for digital and optical standards.

Explore Now

The Right Connection Makes the Measurement

Maximize accuracy and performance with precision accessories engineered for Keysight instruments.

Explore Now
Solutions
Library

Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.

Featured

Application Notes

Data Sheets

White Papers

eBooks
Browse Technical Resources
Classroom

Hands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.

Learning Hubs

Blogs

Events

Product Demos
Explore Engineering Bootcamps
Explore Keysight Learn

Success Stories
Success Stories

HPE Juniper Networking Builds Next-Gen AI Infrastructure

Learn More
Buy
Support Tasks

Quick access to support related self-help tasks.

Technical Support

Knowledge Center

Service Order Management

Calibration Certificates

Software Download Center
Tools

Additional content to support your product needs.

Keysight Support Portal

Computer Aided Engineering (myESI)

Network Test and Visibility Support

NES Wireless Solutions Help Desk

Software Test Support (Eggplant)

Software Licensing Manager
Do more with Keysight Services

Explore services to accelerate every step of your innovation journey.

Learn more

Welcome

You are signed as:
My Profile
Logout

United Kingdom

中国
日本
繁體中文
한국
Brasil
Canada
Deutschland
France
India
Malaysia
United Kingdom
United States
Australia
Austria
Belgium
Denmark
Finland
Hong Kong, China
Ireland
Israel
Italy
Mexico
Netherlands
Singapore
Spain
Sweden
Switzerland (German)
Thailand
Vietnam
View all countries or areas more...

My Shopping Cart

Your cart is empty. See our online selection with free same day shipping Saved carts can be accessed from the Cart Summary

Welcome |

Exit Procurement Session

View and Transfer Cart
Discard Cart and End Procurement Session

What are you looking for?

I'm looking for support Pro Oscilloscopes Handheld Spectrum Analyzers Compact Signal Generators Find a solution Get technical support Take a class Find us at events Premium used equipment KeysightCare Buy online

Accessories

Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.

Showing 12 of 255

Sort:

Filter & Sort

All Accessories

All Compatible Products

Photonic and Quantum

Security Testing

Semiconductor and Manufacturing

Automotive Emulators

Power Test Instruments

Digital Instruments

137

Wireless Emulators

Zusätzliche Produkte

RF Test Instruments

Upgrade Produkte

No compatible products available.

Accessories Kit
13
Active Probe
21
Active Termination Adapter
2
Adapter
19
Alligator Ground Lead
1
Attenuator
1
Blocking Capacitor
1
Browser
8
Cable
5
Cable Assembly
3
Cable Kit
5
Clamp-On Probe
1
Connection Cable
1
Connector
2
Dual-Lead
6
Dual-Pin
1
Flying Leads
4
Ground Blades
1
Ground Leads
2
Ground Springs
2
Hook Tip
1
Horizontal Mini Probe Socket
1
IC Clip
1
Kelvin Probe Set
1
LED Probe Clip Light
1
Mounting Cradles
1
Multiple Accessories
2
Offset Ground Blades
1
Optical-to-Electrical Converter
2
PXIe AutoProbe Power Module
1
Passive Probe
31
Passive Probe Alligator Ground
1
Performance Verification and Deskew Fixture
1
Performance Verification and Deskew Kit
1
Positioner
4
Power Supply
1
Probe Adapter
1
Probe Amplifier
8
Probe Head
15
Probe Tip
16
Replacement MBB Receptacles
1
Replacement Wires
1
Soldering Toolkit
1
Surface Mount Clip
1
Thermistor
1
Thermocouple
2
Vertical Mini Probe Socket
1
Wedge Probe Adapter
4

No Filter available

16 GHz to 65 GHz

No Filter available

10070 Probe Family
1
10080 Probe Family
1
1250-4403
2
16850A Series Portable Logic Analyzers
2
DCA-X Mainframes, Modules, and Stand-alone DCA-Ms
1
DP001xA Series differential Active Probes
1
InfiniiMax 4 Probe System
1
InfiniiMax III/III+ Series Probe Amplifiers
1
InfiniiVision and Infiniium Oscilloscopes
1
Infiniium UXR-Series Oscilloscopes
2
M924XA PXIe Modular Oscilloscopes
1
MX0100A
1
Multiple Probes and PCBs
2
N2780-83A
1
N2780-83B
1
N2787A
1
N2795A
3
N2796A
3
N2797A
3
N2820A
2
N2821A
2
N2840A
1
N2841A
1
N2842A
1
N2843A
1
N2853A
1
N2862B
1
N2863B
1
N2870A
2
N2871A
1
N2872A
1
N2873A
1
N2874A
1
N2875A
1
N2876A
1
N2880A
1
N2889A
1
N2890A
1
N7007A
1
N7020A
1
N7024A
1
PS0017A
1
PS0018A
1
PS0019A
1
Probes and Handheld Digital Multimeters
1
W3633A
1

No Filter available

1.85 mm
1
160-pin
1
2.92 mm
3
40-pin
1
61-pin ZIF
2
90-pin
3
BNC
1
Flying Lead
2
Mictor
1
SMA
3
Type-N
1

No Filter available

40 dB
1
6|12|20 dB
1

No Filter available

Attenuator
1
Attenuator Set
1

No Filter available

34
2

No Filter available

18 GHz
1

No Filter available

Buy Online - 2 Day Delivery
14
Buy Online - Standard Delivery
166

No Filter available

£ 14.02 to £ 45123

No Filter available

View Items

InfiniiMax Ultra Probe Amplifier, 25 GHz

Model

MX0025A

List Price

£ 34,367

Attenuation

Attenuator Type

Bandwidth

25 GHz

Compatible instruments

Connector type

Maximum frequency

Free Trial

InfiniiMax Ultra Probe Amplifier, 25 GHz

Free Trial

MX0025A

List Price:

£ 34,367

Best probes for measuring signals found in the latest DDR5 and MIPI standards.

Data Sheet
Options and Upgrades
Buy or Rent Options
Visit Technical Support

Attenuation

Attenuator Type

Bandwidth

25 GHz

Compatible instruments

Connector type

Maximum frequency

25 GHz InfiniiMax Ultra Probe Amplifier

Test and validate high-speed technologies such as DDR5 / MIPI with the 25 GHz probe amplifier (AP2).
Experience the highest input impedance in midband frequencies for low-energy probing.
Boost test margins with the lowest signal degradation.
Probe small devices with the super-flexible micro probe head or choose from the widest variety of compatible probe heads for your unique application.
Measure differential, single-ended, and common mode signals with a single probe tip.
Use with Infiniium UXR-, 90000 X-, Q-, V-, and Z-Series oscilloscopes.

Keysight’s MX0025A InfiniiMax Ultra Series probe amplifier improves usability because you can measure differential, single-ended, and common mode signals with a single probe tip.

When you use a probe to connect your signal to your oscilloscope, it becomes part of the circuit affecting your test. Your probe may be hiding signal details, loading down your signal, or distorting it. InfiniiMax Ultra Series probes have the lowest loading for minimal impact to your circuit. Boost your test margins and gain measurement confidence with their unprecedented accuracy. Ensure your entire measurement system is helping you see the truest representation of your signal.

These probes have the lowest noise and capacitive loading and the lowest loading across more frequencies due to their RC high impedance profile. The InfiniiMax Ultra Series supports InfiniiMode and has a user-defined AC calibration mode, a wider input voltage range, more accuracy with unique S-parameter characterization, lower capacitive loading, a wider input voltage range, micro / socketed probe heads for smaller density probing, and more bandwidths. The InfiniiMax Ultra Series has an RC input impedance architecture with the lowest loading and least signal distortion across the widest frequency range.

InfiniiMax Ultra probes have three attenuation ranges — 1:1, 4:1, and 8:1 — giving you superior noise performance and large voltage ranges, all while maintaining maximum bandwidth. The input range automatically configures depending on the size of the input signal and vertical scale of your oscilloscope.

Choose from the three flexible input dynamic ranges from 600 mVpp at 1:1, 2.5 Vpp at 4:1, and 5 Vpp at 8:1. Clearly see and know when your design is satisfactory, keep up with standards, easily probe small devices, and reduce test complexity with the InfiniiMax Ultra Series probes.

View Details

Active Probe, 2 GHz

Model

N2796A

List Price

£ 3,211

Attenuation

Attenuator Type

Bandwidth

2 GHz

Compatible instruments

Connector type

Maximum frequency

Free Trial

Active Probe, 2 GHz

Free Trial

N2796A

List Price:

£ 3,211

Ideal for digital system design, component design/characterization, and educational research applications.

Data Sheet
Buy or Rent Options
Visit Technical Support

Attenuation

Attenuator Type

Bandwidth

2 GHz

Compatible instruments

Connector type

Maximum frequency

Key Features:

2 GHz bandwidth (-3dB)
High resistance (1MΩ) and low capacitance (1 pF) input for low loading
Wide input dynamic range (±8V) and offset range (±12V)
Built-in headlight for better visibility while probing
Includes various probe tip accessories
Direct connection to AutoProbe interface (no power supply required)

Compatible Oscilloscopes:

Keysight InfiniiVision 3000/3000T X-, 4000 X-, 6000 X-, 5000, 6000 (except 6000 100 MHz), 7000 and Infiniium 9000, S-Series and 90000A Series.

The N2796A is a new generation of low-cost, single-ended active probe with the AutoProbe interface. The probe integrates many of the characteristics needed for today’s general-purpose, high-speed probing - especially in digital system design, component design/characterization, and educational research applications. Its 1MΩ input resistance and extremely low input capacitance (1 pF) provide ultra low loading of the DUT. This, accompanied with superior signal fidelity, makes this probe useful for most of today’s digital logic voltages. And with its wide dynamic range (±8 V) and offset range (±12 V), the probe can be used in a wide variety of applications.

For high signal integrity probing, the N2796A 2 GHz active probe is a perfect complement to Keysight’s 1 GHz bandwidth Infiniium and InfiniiVision Series scopes. The N2796A can also be used with Keysight’s 2.5 GHz or higher bandwidth Infiniium 9000 or 90000 Series scopes as a low-cost alternative to 1156A-1158A active probe or InfiniiMax probe.

The N2796A is equipped with a white LED headlight to illuminate the circuit under test. The probe is powered directly by the InfiniiVision and Infiniium AutoProbe interface, eliminating the need for an additional power supply. The probe also comes with a number of accessories that allow for easy connections to the circuit under test.

View Details

Kelvin Probe Set

Model

11059A

List Price

£ 229

Attenuation

Attenuator Type

Bandwidth

Compatible instruments

Connector type

Maximum frequency

Free Trial

Kelvin Probe Set

Free Trial

11059A

List Price:

£ 229

Reduce ground-related errors and contact resistance through gold-plated flat tweezers and special gripping surfaces

Options and Upgrades
Buy or Rent Options
Visit Technical Support

Maximum voltage: 42 V
Termination: 5 single banana plugs (4-wire measurements plus ground)
Length: cable is 0.8 meters (31.5 inches)

The Keysight kelvin probe set consists of two gold-plated flat tweezers with special gripping surfaces. This design assures a very precise contact to the component and very precise measurements. The ground guard connector removes ground-related errors. The gold plating helps to reduce the contact resistance between the surfaces of the test probe and the lead of the component being measured - reducing overall error!

The Keysight 11059A is compatible with the Keysight 34460A, 34461A, 34401A, 3458A, 34410A, 34411A, 34465A, 34470A digital multimeters and B2900 series precision source / measure units.

View Details

InfiniiMax Differential SMA Probe Head, 21 GHz

Model

MX0105A

List Price

£ 4,623

Attenuation

Attenuator Type

Bandwidth

21 GHz

Compatible instruments

Connector type

Maximum frequency

Free Trial

InfiniiMax Differential SMA Probe Head, 21 GHz

Free Trial

MX0105A

List Price:

£ 4,623

The MX0105A is a differential SMA probe head that provides 20 GHz of bandwidth and allows you to connect two SMA cables to make differential measurements on an oscilloscope channel.

Data Sheet
Options and Upgrades
Buy or Rent Options
Visit Technical Support

Attenuation

Attenuator Type

Bandwidth

21 GHz

Compatible instruments

Connector type

Maximum frequency

21 GHz bandwidth -- when used with InfiniiMax MX0025A probe amp
Connect to SMA fixtured differential pairs
Frees additional oscilloscope channels by using a single channel to measure differential signals
Includes semi-rigid coax to change span between SMA connectors
Allows for termination to a common DC voltage (± 4 V) rather than a ground
Max input voltage =2.28 Vrms (Vin-Vcm_term)
Infiniium software version 11.60 or higher is required for 21 GHz operation.

The MX0105A is a differential SMA probe head that provides 21 GHz of bandwidth and allows you to connect two SMA cables to make differential measurements on an oscilloscope channel. The SMA head allows for termination to a common DC voltage (± 4 V) rather than a ground that would be required for signal standards such as HDMI and MIPI Mphy. The termination voltage is applied externally using the supplied cable and a DC power supply.

View Details

Impedance Probe Kit for Impedance Analyzer

Model

42941A

List Price

£ 6,551

Attenuation

Attenuator Type

Bandwidth

Compatible instruments

Connector type

Maximum frequency

Free Trial

Impedance Probe Kit for Impedance Analyzer

Free Trial

42941A

List Price:

£ 6,551

Perform in-circuit measurements on the E4990A-120 with better accuracy and wider impedance from 20 Hz to 120 MHz.

Brochure
Options and Upgrades
Buy or Rent Options
Visit Technical Support

The 42941A Impedance Probe Kit used with the Impedance Analyzer provides the capability to perform in-circuit measurements (printed circuit patterns, the input/output impedance of circuits, etc.) with better accuracy and wider impedance coverage from 20 Hz to 120 MHz. In-circuit measurements can improve cycle time in a design environment, or reduce the cost of rework in a production environment.

Learn more about Keysight LCR Meter & Impedance Measurement Product Accessories

View Details

Passive Probe, 10:1, 500 MHz, 1.3 m

Model

N2873A

List Price

£ 555

Attenuation

Attenuator Type

Bandwidth

500 MHz

Compatible instruments

Connector type

Maximum frequency

Free Trial

Passive Probe, 10:1, 500 MHz, 1.3 m

Free Trial

N2873A

List Price:

£ 555

The N2873A passive probe offers DC to 500 MHz and 10:1 attenuation factor to address a wide range of measurement needs. Use this probe's compact 2.5-mm tip diameter and low input capacitance for general-purpose probing.

Data Sheet
Buy or Rent Options
Visit Technical Support

Attenuation

Attenuator Type

Bandwidth

500 MHz

Compatible instruments

Connector type

Maximum frequency

500 MHz bandwidth
10:1 attenuation ratio
9.5 pF input capacitance
10 MΩ input resistance (when terminated into 1 MΩ scope input)
400 V CAT I and 300 V CAT II maximum input voltage
Scope compensation range: 10 – 25 pF

The N2873A passive probe offers DC to 500 MHz and 10:1 attenuation factor to address a wide range of measurement needs.

Compact 2.5-mm probe head diameter, low input capacitance, and various fine-pitch probe tip accessories make the Keysight N2870A Series passive probes ideal for probing densely populated IC components or surface-mount devices used in today’s high-speed digital applications.

The sharp probe tip is spring loaded to help engineers keep the probe from slipping off the device under test. Insulating IC caps keep the small probe tip centered on the IC lead and keep it from shorting adjacent leads. Standard flat blade ground connector and self-adhesive copper ground pad help reduce ground inductance while offering easy ground access. Optional probe tip accessories provide specialized capabilities for demanding applications.

Compatible with Keysight InfiniiVision and Infiniium Series oscilloscopes with 1 MΩ input. This probe ships with Keysight’s 9000 Series Infiniium oscilloscope.

View Details

InfiniiMax Probe, 7 GHz

Model

1134B

List Price

£ 12,130

Attenuation

Attenuator Type

Bandwidth

7 GHz

Compatible instruments

Connector type

Maximum frequency

Free Trial

InfiniiMax Probe, 7 GHz

Free Trial

1134B

List Price:

£ 12,130

Use for high-speed differential or single-ended probing in embedded designs

Data Sheet
Buy or Rent Options
Visit Technical Support

Attenuation

Attenuator Type

Bandwidth

7 GHz

Compatible instruments

Connector type

Maximum frequency

Bandwidth:

Bandwidth: 7 GHz

Range:

Dynamic Range: +/- 2.5V
DC Offset Range: +/- 12V when using probe offset
Maximum Voltage: +/- 30V

Input Impedance:

Differential Input R: 50 kOhm
Differential Input C: 0.27-0.34 pF
Single Ended Input R: 25 kOhm
Single Ended Input C: 0.44-0.67 pF

For high-speed differential or single-ended probing in embedded designs, the InfiniiMax 7 GHz 1134B differential probe amplifier is a perfect complement to Infiniium 6 GHz oscilloscopes. Its extremely low input capacitance, flat frequency response and resistor probe tip technology provide ultra-low loading of the DUT and superior signal fidelity. The InfiniiMax 1130B-34B Series supports a wide variety of real-world applications with an extensive line up of probe heads and accessories. The accessories can meet the most demanding mechanical access requirements.

The 1134B is the RoHS compliant version of the 1134A. The 1134B is 100% form, fit, function and price equivalent to the 1134A.

To see the other available probe head accessories for InfiniiMax 1130B-34B, visit InfiniiMax probe accessories.

Learn more about Oscilloscope Single-Ended Active Probes

View Details

Thermocouple (K-Type) and Temperature Probe Adapter

Model

U1186A

List Price

£ 51.22

Attenuation

Attenuator Type

Bandwidth

N/A

Compatible instruments

Connector type

Maximum frequency

Free Trial

Thermocouple (K-Type) and Temperature Probe Adapter

Free Trial

U1186A

List Price:

£ 51.22

Consists of a K-type thermocouple bead and a mini connector to dual banana plugs

Data Sheet
Options and Upgrades
Buy or Rent Options
Visit Technical Support

Attenuation

Attenuator Type

Bandwidth

N/A

Compatible instruments

Connector type

Maximum frequency

The U1186A consists of a thermocouple bead (K-type) and a mini connector to dual banana plugs.

The operating range for the thermocouple is from -20°C to 200°C.

Accuracy: ±1.1°C.

For more information about temperature measurement units, please visit Temperature Sensors and Temperature Probes.

View Details

Standard Test Lead Kit

Model

U1168A

List Price

£ 121

Attenuation

Attenuator Type

Bandwidth

Compatible instruments

Connector type

Maximum frequency

Free Trial

Standard Test Lead Kit

Free Trial

U1168A

List Price:

£ 121

Compatible with the U1230/40/50/70 handheld DMMs; includes test leads, test probes, alligator clips, and SMT and mini grabbers

Options and Upgrades
Buy or Rent Options
Visit Technical Support

Test leads: CAT III 1000V, CAT IV 600V, 15A rating
Test probe (19-mm tips): CAT II 1000V, 15A rating
Test probe (4-mm tips): CAT III 1000V, CAT IV 600V, 15A rating (highly recommended for CAT IV environment) Alligator Clips: Cat III 1000V, CAT IV 600V, 15A rating
Fine Tip Test Probes: Cat II 300V, 3A
SMT Grabber: Cat II 300V, 3A
Mini Grabber (black only): Cat II 300V, 3A

The Keysight U1168A standard test lead kit is compatible with the U1230, U1240, U1250 and U1270 Series handheld digital multimeters. The set includes one pair of test leads, test probes (19-mm tips), test probes (4-mm tips), alligator clips, fine tip test probes, SMT Grabbers and mini grabber ( black only).

For more information about Keysight test leads and probes for multimeters, please visit Multimeter Test Leads and Probes.

View Details

Cable Assembly, Coaxial Phased-matched Pair, 1 m

Model

N2823A

List Price

£ 5,259

Attenuation

Attenuator Type

Bandwidth

>40 GHz

Compatible instruments

Connector type

2.92 mm

Maximum frequency

Free Trial

Cable Assembly, Coaxial Phased-matched Pair, 1 m

Free Trial

N2823A

List Price:

£ 5,259

Extend the cable length of your test fixtures using this 1-m, flexible coax cable assembly with 2.92-mm (m) connectors

Data Sheet
Options and Upgrades
Buy or Rent Options
Visit Technical Support

Attenuation

Attenuator Type

Bandwidth

>40 GHz

Compatible instruments

Connector type

2.92 mm

Maximum frequency

2.92 mm (m) to 2.92 mm (m)
>40 GHz bandwidth (-3dB)
Skew error matched to <5 psec
Cable length: 1 m
Strain relieved
S-parameter supplied by Keysight

The N2823A is a low-loss, phase-matched, flexible coax cable assemblies with 1 m cable length and 2.92 mm male connectors on both ends, providing extended cable length to the compatible Keysight test fixtures, InfiniiMax 2.92 mm heads and other RF/microwave test instruments.

View Details

MSO Cable Kit, 16-Channel

Model

N2756A

List Price

£ 1,013

Attenuation

Attenuator Type

Bandwidth

Compatible instruments

Connector type

Flying Lead

Maximum frequency

Free Trial

MSO Cable Kit, 16-Channel

Free Trial

N2756A

List Price:

£ 1,013

Easily probe far-apart pins; includes flying lead cable, 5 right-angle grounds, 5 ground extenders, and 18 grabbers

Technical Overview
Options and Upgrades
Buy or Rent Options
Visit Technical Support

Attenuation

Attenuator Type

Bandwidth

Compatible instruments

Connector type

Flying Lead

Maximum frequency

Divided into 4 sets of 4 channels so you can conveniently probe pins that are far apart
Flying leads offer flexibility and convenience
Great signal fidelity with low probe loading (100 kΩ)
Direct connection to a 0.1" header connector

The N2756A is a low-cost 16-channel MSO cable kit for InfiniiVision Series oscilloscopes. The kit includes 1 flying lead cable, 5 right-angle grounds, 5 ground extenders, and 18 grabbers.

The N2756A is a replacement MSO cable.
To enable MSO capability on the following oscilloscopes, order the following upgrade products. The MSO upgrade product includes the N2756A MSO cable and a license to enable the MSO functionality.

InfiniiVision 3000A X-Series (100 MHz, 200 MHz, 350 MHz, and 500 MHz models): DSOX3MSO
InfiniiVision 3000A X-Series (1 GHz models): DSOXPERFMSO
InfiniiVision 3000T X-Series: DSOXT3MSO
InfiniiVision 4000 X-Series oscilloscopes: DSOXPERFMSO
InfiniiVision DSOX6000 Series oscilloscopes: DSO6MSO

View Details

InfiniiMax Differential ZIF Probe Head, 18 GHz

Model

N5425B

List Price

£ 747

Attenuation

Attenuator Type

Bandwidth

18 GHz

Compatible instruments

Connector type

Maximum frequency

Free Trial

InfiniiMax Differential ZIF Probe Head, 18 GHz

Free Trial

N5425B

List Price:

£ 747

Probe signals with a considerable amount of test points in tight spaces, such as a DDR memory system.

Data Sheet
Options and Upgrades
Buy or Rent Options
Visit Technical Support

Attenuation

Attenuator Type

Bandwidth

18 GHz

Compatible instruments

Connector type

Maximum frequency

Bandwidth

18 GHz (with MX0023A) and 12 GHz (with 1169B)

Input impedance and capacitance

Differential input R: 50 kΩ
Differential input C: 0.33 pF
Single-ended input R: 25 kΩ
Single-ended input C: 0.53 pF

For probing signals with a considerable amount of test points in tight space such as DDR memory system, the N5425B ZIF probe head with the ZIF tip may be the best solution for you.

ZIF (zero-insertion-force) probe heads and tips can reduce probe costs significantly when many measurement points are needed. The ZIF probe head requires ZIF tips that can be soldered down to various places on a circuit board. The ZIF probe head can then be shuttled between these tips to make measurements.

It has a flat frequency response all the way to 18 GHz when used in conjunction with the MX0023A InfiniiMax 25 GHz RC probe amp and is the most economical solder-in probe solution on the market today.

The probe head does not include any ZIF probe tips. Either the N5426A ZIF tips or N5451A long-wired ZIF tips should be ordered with these probe tips.

View Details