Keysight Clock Recovery Systems

Discover Keysight Clock Recovery units, providing reliable synchronization for high‑speed digital analysis with support for NRZ and PAM4, jitter‑spectrum diagnostics, standards‑based loop behavior, and seamless integration with sampling oscilloscopes for advanced optical and electrical compliance testing.

DCA Accessories N1027A Kits and General-Purpose Parts

Summarizes the accessories available for the DCA-X, DCA-M, and Clock Recovery families

N1076B/7B/8A DCA-M

Achieve clarity faster with Keysight's N1076B/7B/8A clock recovery DCA-Ms. These DCA-Ms incorporates innovative technology designed to deliver superior measurements.

Testing DDR5 Input Clock Jitter

DDR5 Electrical and Timing Measurement Techniques

Using Clock Jitter Analysis to Reduce BER in Serial Data Applications

Learn emerging techniques for reference clock jitter analysis for serial data systems and use clock jitter to reduce the bit error ratio (BER) in applications.

Keysight DCA Sampling Oscilloscopes

Explains the configuration rules and guidelines for the Keysight DCA-X, DCA-M, Clock Recovery and FlexOTO solutions.

Accelerate Design Verification by Characterizing Clock Jitter

Learn the effects of clock jitter on data and new measurement techniques using Keysight’s E5001A clock jitter analysis application to improve your design quality.

Advanced Jitter Transfer Measurements for PLL Characterization

Rob Sleigh discusses measuring phase-locked loop (PLL) measurements and clock recovery, using PCIe Transmitter PLL as an example. Kalev Sepp discusses digital down-conversion solutions using real-time oscilloscopes.

Sampling Oscilloscopes Catalog

Explore the comprehensive range of Keysight sampling oscilloscopes (DCAs) engineered for high precision optical and electrical waveform analysis. This catalog highlights modular, fixed configuration, and clock recovery solutions across two performance classes for research, validation, and high‑volume manufacturing environments.

N1081PLCA PCI Express PLL Measurement Software Application

A test automation software to automate the characterization of PCIe 5.0 PLL designs using DCA-based Hardware Recovery system.

Troubleshooting Clock Jitter

Co-branded solutions brochure with Picotest on troubleshooting clock jitter using Keysight network analyzers, signal analyzers and oscillscopes.

224 Gb/s SerDes Conformance Demo

Understand the challenges in high-speed signal validation in this demonstration of the Keysight 224 Gb/s SerDes transmitter conformance test setup.

EZJIT Jitter Analysis Software for Infiniium Series Oscilloscopes

EZJIT jitter analysis software from Keysight , combined with Infiniium Series oscilloscopes, provide insight necessary to evaluate signals and improve your designs.

EZJIT Plus Jitter Analysis Software for Infiniium Oscilloscopes

EZJIT Plus jitter analysis software for Infiniium oscilloscopes provides the advanced decomposition, analysis, and views of jitter necessary for fast and accurate insight into your signal.

M8008A Clock Generator Module

The M8008A is a clock module that is required to operate the M8199A 128/256 GSa/s AWG.

Keysight Fixed Configuration Sampling Oscilloscopes

Discover Keysight Fixed Configuration Sampling Oscilloscopes, delivering compact, cost‑optimized optical and electrical analysis for manufacturing validation. With low jitter, small form‑factor design, automation support, and bandwidths up to 60 GHz, they ensure reliable, high‑throughput device testing.

Less Downtime and Faster Recovery

The potential cost of network downtime can run into thousands of dollars — per minute. To mitigate the effects of, or even prevent a network outage, it is critical to have a robust troubleshooting system in place that delivers complete insight into the network through a visibility architecture. To improve network reliability, organizations need to establish greater visibility of the data that flows through their networks, where it goes, and how to control it. This paper outlines how to use network visibility to reduce troubleshooting time and expense.

D9010EKRP 10G/100GBASE-KR 64b/66b and Link Training Decode and Trigger Software

Data sheet for D9010EKRP protocol software for Infiniium oscilloscopes.

Digital Waveform Signals – Crossing the Digital-Analog Divide

Better understand how to cope with the physical nature of signals and learn tips and techniques to get an ideal digital waveform.

DS1160A Smartcard Voltage and Clock Glitcher

The Smartcard Voltage and Clock Glitcher is designed to inject block glitches with programmable amplitude and duration. Get the details in this data sheet.