Choose a country or area to see content specific to your location
-
PRODUKTE UND DIENSTLEISTUNGEN
-
Oszilloskope
-
Analysatoren
- Spectrum Analyzers (Signal Analyzers)
- Network Analyzers
- Logic Analyzers
- Protocol Analyzers and Exercisers
- Bitfehlerraten-Tester
- Noise Figure Analyzers and Noise Sources
- High-Speed Digitizers and Multichannel DAQ Solutions
- AC-Leistungsanalysatoren
- DC Power Analyzers
- Materialprüfgeräte
- Beriebsstrom-Analysatoren
- Parameter / Device Analyzers and Curve Tracers
-
Meters
-
Generatoren, Rauschquellen und Stromversorgungen
-
Software
-
Mobilfunk und andere Wireless-Technologien
-
Modulare Messgeräte
-
Netzwerktest und -sicherheit
-
Netzwerktransparenz
-
Service
-
Additional Products
- All Products, Software, Services
-
-
Lösungen
-
Nach Anwendungsbeispiel durchsuchen
Nach Branche durchsuchen
- Alle Lösungen
- Learn
- Buy
- Support
Können wir Ihnen behilflich sein?
- Home
- PRODUKTE UND DIENSTLEISTUNGEN
- Zubehör
- Cables, Cable Assemblies, and Leads
- 85134F Flexible Cable Set, 2.4 mm to 3.5 mm
85134F Flexible Cable Set, 2.4 mm to 3.5 mm
Achieve phase stability with these 62.9-cm cables when a DUT is connected between cable ends
Verkauf durch: Keysight Online Sales
Achieve phase stability with these 62.9-cm cables when a DUT is connected between cable ends
HIGHLIGHTS
The Keysight 85134F is a 62.9 cm (24.75 in) long1 flexible cable set composed of a 2.4 mm female2 to PSC-3.5 mm female connector and a 2.4 mm female2 to 3.5 mm male connector. Cable frequency range is dc to 26.5 GHz with a return loss greater than or equal to 16 dB. Insertion loss is 0.31 * sqrt (f) + 0.2, where f is frequency in GHz, for the test port connector and 1.8 dB at maximum frequency for the device connector. Phase stability of semi-rigid/flexible cables is specified with a 90 degree bend using a 4 to 3 inch radius. Stability1 of the Keysight 85134F is less than 0.12 dB and phase is 0.13*f+ 0.5°, where f is frequency in GHz.
1 Cable length and stability are supplemental characteristics.
2 Special rugged female connector is designed specifically for connecting to the network analyzer test port, but does not mate with a standard male connector.
Extend the Capabilities of Your Product
Want help or have questions?
Erkunden
- © Keysight Technologies 2000–2023
- Datenschutz
- Sitemap
- AGBs
- Markenanerkennungen
- Feedback