How to Locate Interfering Signals with TDoA

Get Quote
FieldFox Handheld Microwave Analyzer
+ FieldFox Handheld Microwave Analyzer
FieldFox Handheld Microwave Analyzer
+ FieldFox Handheld Microwave Analyzer

Triangulating The Time Delays Between Receiver Pairs

Determining the location of an unknown signal source in the increasingly crowded spectrum requires advanced direction-finding (DF) techniques. Interference can take various forms, including continuous wave or modulated signals, pulse interference, and narrowband or broadband interference. When locating wideband and digitally modulated interference, Time Difference of Arrival (TDoA) is an effective DF technique. Signal detection, identification, synchronization, and processing are all necessary steps in interference mitigation with TDoA.

Locating the source of an unknown emitter using TDoA requires measuring and triangulating the time delays between receivers. Remote spectrum monitoring software detects the interference. Sophisticated signal processing algorithms analyze and characterize the detected signals. Several synchronized spectrum analyzers, connected to the remote monitoring software network, collect real-time spectrum data of the modulated wideband signal. The software calculates the intersection of the hyperbolas to estimate the emitter’s location using geolocation and timestamping. This process integrates with a mapping system to visually represent the interference signal source.

TDoA Direction-Finding Solution

Locating wideband emitters and interfering signals requires advanced directional finding techniques. Perform TDoA using Keysight Spectrum Management Software (KSMS) networked with three synchronized Keysight FieldFox handheld analyzers. KSMS uses FieldFox as a monitoring device. Operators can then use the same instrument for the entire life cycle of interference hunting, including last-mile testing and locating interference sources. FieldFox enables the convenience of portable test sites, while KSMS provides remote field monitoring capabilities.
Get Quote

See Demo on How You Can Detect and Locate Interference Issues

Explore Products In Our TDoA Direction-Finding Solution

Related Use Cases

How to Demodulate FM Signals Over-the-Air

Analyzing over-the-air FM signals requires extracting audio through analog demodulation. Learn how to collect and analyze information such as carrier power, frequency, modulation rate, and deviation.

Learn more

How to Perform 5G Private Network Site Survey

Deploying and operating 5G private networks requires site survey testing. Learn how to verify RF transmission chain of the base stations as well as end-to-end quality of service and ability to relay real traffic.

Learn more

How to Locate Last Mile Interference

Locating the source of interference in last-mile testing requires direction-finding techniques, such as manual signal triangulation. Learn how to use a directional antenna to hunt last-mile interference in the field.

Learn more

contact us logo

Get In Touch With One Of Our Experts

Need Help Finding The Right Solution For You?

Contact Us