How to Measure Frequency Converter Phase Noise

Get quote
Microwave Network Analyzer
+ Microwave Network Analyzer
Microwave Network Analyzer
+ Microwave Network Analyzer

Measuring phase noise using a VNA with direct digital synthesizer sources

Testing frequency converters for 5G and satellite applications requires capturing several different parameters, including gain, phase, delay, intermodulation distortion (IMD), gain compression, and noise figure. Phase noise is challenging to measure as it is dependent on factors like internal architecture, type of oscillator, internal and external frequency references, and the effects of built-in capabilities. The source of the output phase noise also must be detected.

To measure phase noise, use a vector network analyzer (VNA) with direct digital synthesizer (DDS) sources to determine if the phase noise at the device's output is from the device itself or from the input signal. Add a third source to the test setup to use as a local source for the device under test (DUT) to make two-tone or two-stage frequency converter measurements without needing an external signal generator. The third source can also act as the reference signal for a DUT that requires an external reference clock signal or as the reference signal of another measurement instrument.

PNA-X phase noise measurement solution

Characterizing phase noise requires the capture of many key parameters like gain and noise figure. With direct digital synthesis (DDS) as signal sources, the Keysight PNA-X phase noise measurement solution makes phase noise measurements more stable while delivering improved measurement performance. Based on the Keysight PNA-X microwave network analyzer, the solution can measure active devices such as amplifiers, mixers, and frequency converters.
Get quote

See demo of frequency converter phase noise measurement

Explore products in our phase noise measurement solution

Related use cases

How to Characterize Low-Loss Materials for 5G

Characterizing low-loss materials for 5G requires understanding their electromagnetic properties. Learn how to determine permittivity, permeability, and other characteristics using a network analyzer and material measurement software.

Learn more

How to Accelerate Autonomous Vehicle Testing

PNT systems are vulnerable to NAVWAR threats such as jamming and spoofing that can disrupt operations. Learn how to mitigate these vulnerabilities with testing.

Learn more

How to Validate LEO Satellite Performance

Assuring performance of LEO satellites and constellations requires comprehensive testing. Learn how to validate satellite performance with PNT simulation.

Learn more

contact us logo

Get in touch with one of our experts

Need help finding the right solution for you?

Contact us