EV Charging and EVSE Plug-In Adapter

Test Charging Interfaces of EV and EVSE

Keysight’s SL1040A-ST2 Scienlab Charging Discovery System – Portable Series (CDS Portable Series), SL1040A-EMC/EM2 Scienlab Charging Discovery System – EMC Series (CDS EMC Series), and SL1047A Scienlab Charging Discovery System – High-Power Series (CDS HP Series) are modular solutions for conformance and interoperability testing of the charging interfaces between the electric vehicle (EV) and the EV supply equipment (EVSE).

Thanks to the modular design, the CDS can be configured to customers' specific needs for testing and validating the charging interfaces.

This data sheet provides an overview of the available and compatible adapters and inlets to perform an EV/EVSE charging test.

Extend the Capabilities of Your Test Solution

Meet the Scienlab Charging Discovery System family of solutions

Accelerate your charging interface testing and validate charging behavior across EV and EVSE

Keysight’s Scienlab Charging Discovery System Series (CDS) supports the latest adapters and protocols used with EVs and EVSE. As use cases, standards, and protocols evolve, our modular, upgradeable portfolio will help you ensure conformance and interoperability today and tomorrow.

Meet the SL1200A Series Scienlab Regenerative AC Emulator, 3-Phase

The SL1200A Series was designed to handle all your 3-phase AC test needs up to 1200 VAC, from 30 to 630 kVA without the need for a transformer. Two voltage ranges are available: 600 VAC and 1200 VAC. The 600 VAC models are ideal for low-voltage inverter tests as well as EV and EVSE charging test applications. The 1200 VAC models allow for (HVRT) testing at the IEC LV-AC limit without the need for a large, complex test setup.

• Covers AC test needs; up to 1200 VL-L; up to 130 A; up to 630 kVA.

• Achieve 1200 VL-L at full specifications without extra equipment, such as a transformer.

• Save energy with a 100% regenerative (bidirectional) power solution with >85% efficiency.

• Get up and running immediately with an intuitive soft front panel (SFP).

• Feel confident with a complete, one-vendor solution of hardware, software, consulting, and support services worldwide for many applications, such as EV/EVSE charging tests.

Meet the SL1800A Scienlab Regenerative DC Emulator – High-Power Series

Keysight's SL1800A Scienlab Regenerative DC Emulator – High-Power Series enables you to emulate the large batteries in electric vehicles. The bidirectional power flow allows emulation of both power sourcing applications, such as traction inverter test, as well as power-absorbing (sinking) applications, such as EV charging. Being regenerative, the power absorbed is delivered back to the grid, saving on energy and cooling costs. With bi-directionality, integrated DC voltage and current controllers, high dynamics, and its regenerative energy feedback capacity, the Scienlab Dynamic DC Emulator provides an all-in-one system for efficient and effective testing of the power electronic components in EV and EVSE.

• Fully integrated with SL1040A and SL1047A Scienlab Charging Discovery System.

• Available for high voltage, high-power applications. Extendable to meet future, increased power needs.

• Energy-efficient source and sink mode (96%).