Accessories

The AE6941A Automotive Ethernet Electrical Test Fixture provides easy access to automotive Ethernet electrical signals so you can perform conformance testing and device characterization quickly and easily.

You can use this breakout board with the AE6942A, AE6943A, and AE6960A adapters to support the Keysight AE6900T, AE6900R, and AE6900L automotive Ethernet electrical conformance applications to provide fast and accurate design validation and debug of transmit receive and link segment signals.

Features

• Complete 100BASE-T1 automotive Ethernet signal access for conformance testing and characterization
• Compliant with IEEE 802.3bw and IEEE 802.3b
• Flexible subMiniature A (SMA) connections for ease-of-use
• Versatile adapter boards available for various connector types including Mini-50, MATEnet and H-MTD

Supports standards 

• IEEE 802.3bw 100 Mb/s
• IEEE 802.3bp 1000 Mb/s
• IEEE 802.3ch multigigabit

Frequency:
1 kHz to 1 GHz

Sample Size (Toroids Only):
height: ≤ 8.5 mm
inner diameter: ≥ 3.1 mm
outer diameter: ≤ 20 mm

The 16454A is designed for accurate permeability measurements of toroidal-shaped magnetic materials. Since the construction of this fixture creates one turn around the toroid (with no magnetic flux leakage), the need of winding a wire around the toroid is unnecessary. Complex permeability is calculated from the inductance with and without the toroid. When the E4991A/4291B with option 002 is used as the measurement instrument, direct readouts of complex permeability are possible. In addition, it is furnished with a small and a large fixture to adapt to a wide range of sizes.

For more information about Material Testing Equipment, please visit Materials Test Equipment and LCR Meter & Impedance Measurement Product Accessories

Frequency:
≤ 30 MHz

Measurement parameters:
capacitance (C), dissipation factor (D), and dielectric constant (εr', εr'')

Material-under-test size:
thickness: ≤ 10 mm
diameter: 10 to 56 mm

The 16451B is used to evaluate the dielectric constant of solid dielectric materials accurately, and complies with ASTM D150. The 16451B employs the parallel plate method, which sandwiches the material between two electrodes to form a capacitor. An LCR meter or an impedance analyzer is then used to measure the capacitance created from the fixture.

For more information about Material Testing Equipment, please visit Materials Test Equipment.

Learn more about LCR Meter & Impedance Measurement Product Accessories

 

Frequency:
1 MHz to 1 GHz

Sample size (smooth sheets only):
thickness: 0.3 mm to 3 mm
diameter: ≥ 15 mm

The 16453A is designed for accurate dielectric constant and loss tangent measurements on the E4991A/4291A/B. It employs the parallel plate method, which sandwiches the material between two electrodes to form a capacitor. The E4991A/4291A/B measures the capacitance created from the fixture, and option 002 firmware calculates the relative complex permittivity as described in the 16451B. Adjustment to insure parallel electrodes is required when using the 16451B. This adjustment is not required with the 16453A because the fixture has a flexible electrode that adjusts automatically to the material surface.

For more information about Material Testing Equipment, please visit Materials Test Equipment.

Learn more about LCR Meter & Impedance Measurement Product Accessories

• Measurement instruments: 4192A, 4194A (impedance mode), 4263B, 4278A, 4279A, 4284A, 4285A, 4294A, E4980A
• Frequency: DC to 40 MHz
• DC bias: +/- 40 V peak max (AC+DC)
• Operating temperature: 0 to 55 ^oC
• Terminal connection: BNC, 4 terminal-pair
• Dimensions (approx.): 128(W) x 60(H) x 71(D) mm
• SMD Test Fixture Selection Table

The 16034E test fixture is designed for impedance evaluations of SMD components. The minimum SMD size that this fixture is adapted to evaluate is 1.6(L) x 0.8(W) mm.

Learn more about Keysight LCR Meter & Impedance Measurement Product Accessories
 

• Frequency: DC to 500MHz
• DC Bias: -40V to +40V
• Operating Temperature: 0 to 55degC (Same as for Measurement Instrument)
• Contacts the SMD with the parallel electrodes.
• It is also provided with another pair of electrodes for holding the lead components.
• Terminal Connection: APC-7

The 16092A test fixure is designed for impedance evaluation of both lead and SMD components. It is furnished with two modules that can be readily screwed onto the plate to measure either lead or SMD components.

• SMD Test Fixture Selection Table

The 16334A is designed for impedance evaluations of SMD. The minimum SMD size that this fixture is adapted to evaluate is 1.6(L) x 0.8(W)[mm]. The tweezer's contacts on this fixture makes it easy to hold the DUT.

Learn more about Keysight LCR Meter & Impedance Measurement Product Accessories

• SMD Test Fixture Selection Table

The 16196C surface mount devices (SMD) test fixture offers excellent repeatability and usability, with accurate correlation up to 3 GHz. 16196 series fixtures are custom designed to fit specific SMD sizes (see table below), and provide repeatable DUT positioning with reliable contacts to enable stable measurement results - reducing the possibility of operator-induced error. Traditionally, SMD inductor evaluation up to 3 GHz has been difficult to implement - now with the 16196 series, it’s easy to perform accurate and repeatable measurements.

Learn more about Keysight LCR Meter & Impedance Measurement Product Accessories
 

• SMD Test Fixture Selection Table

The 16194A is designed for measuring both axial/radial leaded devices and SMD within the temperature range from -55 to +200degC.

The 16065A test fixture makes it possible to measure a DUT with up to +/-200V DC BIAS. The same modules of 16047A/D can be used to allow measurements of axial/radial lead components.

Learn more about Keysight LCR Meter & Impedance Measurement Product Accessories
 

• DUT Dimensions: (minimum applicable)0.6mm(L)x0.3mm(W)
• Measurement Instrument: 4192A, 4294A, 4263B, 4268A, 4278A, 4279A, 4284A, 4285A, E4980A
• Frequency: DC to 3 MHz (up to 110MHz with OPEN/SHORT/LOAD Compensation)
• DC Bias: -40V to +40V
• Operating Temperature: 0 to 55degC
• Terminal Connection: BNC, 4 terminal-pair
• Dimensions(approx.): 120(W) x 50(H) x 70(D)mm
• SMD Test Fixture Selection Table

The 16034G is designed for impedance evaluations of SMD. The minimum SMD size that this fixture is adapted to evaluate is 0.6(L) x 0.3(W)[mm].

Learn more about Keysight LCR Meter & Impedance Measurement Product Accessories
 

• 0201/0402 (mm) bottom electrode DUTs supported
• DC to 3 GHz version (option 003) and 9 kHz - 10 GHz version (option 010)
• New 10 GHz version (option 010) works with E5080B Vector Network Analyzer
• Maximum voltage: ±42V peak max. (AC+DC)
• Temperature: -55 to 85 ^oC

The 16198A is designed for impedance evaluations of bottom electrode SMDs. It achieves stable frequency characteristics up to 3 GHz or 10 GHz and provides highly repeatable measurements. The Keysight 16198A supports very small SMD sizes, 0201 (mm) and 0402 (mm).

Learn more about Accessories