Accessories

• Ready-to-teach module with 12 hours of structured, hands-on labs spanning device measurement and RF design.

• Prebuilt DLS test plans and lab sheets for SMU-based device characterization, plus ADS projects for mixer and FET amplifier design—mirroring common industry workflows.

• Access an industry tool such as the B2902C precision SMU with Digital Learning Suite software and ADS software.

• Industry-aligned outcomes:
  • Lab 1— Learn how to characterize basic semiconductor devices and know the differences in features between devices.
    
  • Lab 2— Learn the process to design a mixer by using a transistor in ADS.
    
  • Lab 3— Learn the process to design an amplifier by using FET in ADS and know how to simulate and optimize.
    

• Supports university semiconductor training and Keysight credential initiatives so graduates can demonstrate job-ready skills.

Keysight’s Semiconductor Teaching Lab helps educators accelerate course development or refresh existing programs. Students begin with device-level measurements using a precision SMU and Digital Learning Suite automation. They then progress to RF block-level design in ADS, where they build practical habits of setting objectives, running simulations, validating results, and refining designs—skills valued in today’s engineering teams.

The Module emphasizes fundamentals with professional-grade tools. Students measure LEDs, BJTs, and MOSFETs using the B2902C and DLS. They then design a low-power active mixer and a small-signal FET amplifier in ADS, applying bias network design, Smith chart matching, noise and stability analysis, parametric sweeps, and optimization. These activities mirror the methods used in modern IC and RF design environments.

• Ready-to-teach package for a full-semester covering 75 hours of classroom sessions and 50 hours of lab sessions
• The courseware comes with teaching slides and a training kit (with BeagleBone board, lab sheets and problem-based assignments for hands-on learning) and is designed to work with hardware instruments and Keysight software, forming a complete teaching solution
• Courseware integrates hands-on industry relevant experiences and real-world applications in IoT design and testing
• Participant in University Student Certification Program

Keysight’s ready-to-teach Advanced IoT courseware is designed to assist educators in quickly setting up new engineering courses on the Internet of Things, with the intention of producing students who will fully understand the challenges and requirements of the IoT system design cycle, from design and validation to deployment in the market. In addition to teaching practical design and test techniques from the fundamentals of system design to wireless communication and power measurement, this courseware will also cover critical design considerations that have emerged with the evolution of the Internet of Things, such as cybersecurity, compliance and continuity.

The IoT System Design and Validation Fundamentals lab setup is a ready-to-teach package focusing on the fundamentals of the Internet of Things and embedded system design. It introduces students to IoT architecture, technologies, standards, wireless protocols, applications, and ecosystems. It also covers IoT embedded system design that includes device cybersecurity basics.

Looking for the courseware without teaching slides? Check out the U3813A IoT System Design and Validation Fundamentals, with Training Kit and Lab Sheet.

Recommended Instruments:

• 34465A Digital Multimeter - Digital multimeter with data logging, digitizing and auto calibration
• DSOX1204G Oscilloscope - 70/100/200 MHz, 4 analog channels, with a built-in waveform generator

Recommended year of study:

• Second to final year undergraduates

Note:

The SeeedStudio BeagleBone® Green Wireless (BBGW) Development Board is required to form a complete IoT training kit.

The BeagleBone® Green Wireless can be shipped to the following countries:

USA, Canada, Europe, United Kingdom, China, Russia, Japan, Korea, Vietnam, Malaysia, Hong Kong, Singapore, Thailand, India, Switzerland, Australia, New Zealand, Philippines, Taiwan, Indonesia, Brazil, Turkey, Colombia, Saudi Arabia and Mexico

The BeagleBone® Green Wireless must be purchased separately for countries that are not listed above.

https://www.beagleboard.org/boards/seeedstudio-beaglebone-green-wireless

Download Advanced IoT sample courseware.

• Lower bandpass cutoff frequency: 3.2 kHz
• Center bandpass frequency: 50 kHz
• Upper cutoff frequency: 800 kHz
• Maximum input voltage: 10 V_PP into 50 Ω
• Probe test points: V_IN, BPF_OUT, LPF_OUT, GND (2X)
• Series component values: R = 50 Ω, L = 10 µH, C = 1 µF

Note: All specifications stated as typical.

The DSOXBODE Bode plot training kit consists of a series R-L-C circuit board with a BNC input that attaches directly to the output of the oscilloscope’s WaveGen function generator. There are clearly labeled test points for probing V_IN and BPF_OUT (bandpass filter output) or LPF_OUT (low-pass filter output). Also included with this training kit is a comprehensive tutorial and lab guide that engineering students and professors can download.

Get a free DSOXBODE Bode plot training kit with the purchase of each InfiniiVision 1000 X-Series oscilloscope with the built-in waveform generator (EDUX1052G, DSOX1202G, and DSOX1204G models only).

The U3851A RF Microwave circuit design, simulation, and measurement courseware is a core component of Keysight’s RF Microwave Teaching Solution. The courseware includes a modular prototype kit that utilizes a 1.8-GHz receiver module, editable lab sheets, and problem-based assignments that cover 50 hours’ worth of lab sessions. Through the U3851A courseware, students learn how to design an RF product end-to-end, from specification and simulation, to prototype building and validation. Students will develop practical skills in using industry-standard test and measurement instruments such as oscilloscopes, network analyzers, signal generators, and spectrum analyzers. They will also learn how to design an RF receiver with Keysight’s industry-leading electronic design and automation (EDA) software including PathWave Advanced Design System (ADS) and PathWave System Design (SystemVue).

The Keysight RF Microwave Teaching Solution establishes a solid foundation in RF microwave fundamentals, paving the way for the student’s specialization in advanced 5G or IoT wireless applications. Such practical skills and real-world application knowledge gained through the courseware will make the students industry-ready and highly sought-after.

• Delivers lab courseware that covers the entire RF system design lifecycle
• Helps university professors save time and resources by expanding current engineering programs
• Helps universities easily integrate the lab courseware into the current curriculum
• Ensures students are fully updated with the latest developments in engineering

The Training Kit consists of the modular prototype kit, kit controller, RF adapters and splitter, cables (RF, power, LAN, BNC), power adapter, and carry case.

• Lab Sheets: Lab 1 – Transmission Lines, Lab 2 – Filter, Lab 3 – Low Noise Amplifiers, Lab 4 – Driver and Power Amplifiers, Lab 5 – Oscillator and Synthesizers, Lab 6 – Mixers, Lab 7 – 5G Receiver Design, Simulation and Measurement
• Recommended instruments: Signal Generator (N5171B), Spectrum Analyzer (N9000B), Network Analyzer (N9917A), Noise Source (346B), Power Supply (E36312A), Oscilloscope (DSOX1102G), Calibration Kit (85521A)
• Required EDA software: PathWave Advanced Design System (ADS), PathWave RF Synthesis (Genesys) PathWave EM Design (EMPro), PathWave System Design (SystemVue)
• Optional Software: PathWave BenchVue
• Where does this fit in your curriculum?
  • Target university subject: RF and microwave design
  • Target year of study: 3rd year and final-year undergraduates
  • Prerequisites: Basic circuits, signals and systems, analog electronics, and electromagnetics

• Ready-to-teach package for a full-semester covering 50 hours of lab sessions
• The courseware comes with teaching slides and a training kit (with BeagleBone board, lab sheets and problem-based assignments for hands-on learning) and is designed to work with hardware instruments and Keysight software, forming a complete teaching solution
• Courseware integrates hands-on industry relevant experiences and real-world applications in IoT design and testing
• Participant in University Student Certification Program

Keysight’s ready-to-teach Advanced IoT courseware is designed to assist educators in quickly setting up new engineering courses on the Internet of Things, with the intention of producing students who will fully understand the challenges and requirements of the IoT system design cycle, from design and validation to deployment in the market. In addition to teaching practical design and test techniques from the fundamentals of system design to wireless communication and power measurement, this courseware will also cover critical design considerations that have emerged with the evolution of the Internet of Things, such as cybersecurity, compliance and continuity.

The Precision Power Measurement and MEMS sensors lab setup is a ready-to-teach package starting from portion of IoT System Design and Validation Fundamentals. The courseware then moves into topics of how to characterize the power consumption of IoT devices onboard controllers, sensors and wireless modules, to eventually covering sophisticated battery optimization learning involving RF event detector and analysis software.

Looking for the courseware without teaching slides? Check out the U3817A IoT Precision Power Measurement and MEMS Sensors with Training Kit and Lab Sheet.

Recommended Instruments/software:

• 34465A Digital Multimeter – Digital multimeter with 2M memory, digitizing and auto calibration
• DSOX1204G Oscilloscope - 70/100/200 MHz, 4 analog channels, with a built-in waveform generator
• N6705C DC Power Analyzer - Modular system based on DC power supply or electronic load outputs
• N6781A 2-Quadrant source - Source/Measure Units (SMUs) Modules
• X8712AD Event detector and analysis software X8712AS – IoT device battery life optimization solution

Recommended year of study:

• Third to final year undergraduates

Note:

The SeeedStudio BeagleBone® Green Wireless (BBGW) Development Board is required to form a complete IoT training kit.

The BeagleBone® Green Wireless can be shipped to the following countries:

USA, Canada, Europe, United Kingdom, China, Russia, Japan, Korea, Vietnam, Malaysia, Hong Kong, Singapore, Thailand, India, Switzerland, Australia, New Zealand, Philippines, Taiwan, Indonesia, Brazil, Turkey, Colombia, Saudi Arabia and Mexico

The BeagleBone® Green Wireless must be purchased separately for countries that are not listed above.

https://www.beagleboard.org/boards/seeedstudio-beaglebone-green-wireless

Download Advanced IoT sample courseware.

• Ready-to-teach package for a full-semester covering 50 hours of lab sessions
• The courseware comes a training kit (with BeagleBone board, lab sheets and problem-based assignments for hands-on learning) and is designed to work with hardware instruments and Keysight software, forming a complete teaching solution
• Courseware integrates hands-on industry relevant experiences and real-world applications in IoT design and testing
• Participant in University Student Certification Program

Keysight’s ready-to-teach Advanced IoT courseware is designed to assist educators in quickly setting up new engineering courses on the Internet of Things, with the intention of producing students who will fully understand the challenges and requirements of the IoT system design cycle, from design and validation to deployment in the market. In addition to teaching practical design and test techniques from the fundamentals of system design to wireless communication and power measurement, this courseware will also cover critical design considerations that have emerged with the evolution of the Internet of Things, such as cybersecurity, compliance and continuity.

The Precision Power Measurement and MEMS sensors lab setup is a ready-to-teach package started from portion of IoT System Design and Validation Fundamentals. Then move into topic of how to characterize the power consumption of IoT devices onboard controllers, sensors and wireless modules, eventually covers sophisticated battery optimization learning involve RF event detector and analysis software.

Looking for the courseware offers teaching slides? Check out the U3818A IoT Precision Power Measurement and MEMS Sensors with Training Kit, Teaching Slide and Lab Sheets.

Recommended Instruments/software:

• 34465A Digital Multimeter – Digital multimeter with 2M memory, digitizing and auto calibration
• DSOX1204G Oscilloscope - 70/100/200 MHz, 4 Analog Channels, with a built-in Waveform Generator
• N6705C DC Power Analyzer - Modular System Based on DC Power Supply or Electronic Load Outputs
• N6781A 2-Quadrant source - Source/Measure Units (SMUs) Modules
• X8712AD Event detector and analysis software X8712AS – IoT device battery life optimization solution

Recommended year of study:

• Third to final year undergraduates

Note:

The SeeedStudio BeagleBone® Green Wireless (BBGW) Development Board is required to form a complete IoT training kit.

The BeagleBone® Green Wireless can be shipped to the following countries:

USA, Canada, Europe, United Kingdom, China, Russia, Japan, Korea, Vietnam, Malaysia, Hong Kong, Singapore, Thailand, India, Switzerland, Australia, New Zealand, Philippines, Taiwan, Indonesia, Brazil, Turkey, Colombia, Saudi Arabia and Mexico

The BeagleBone® Green Wireless must be purchased separately for countries that are not listed above.

https://www.beagleboard.org/boards/seeedstudio-beaglebone-green-wireless

Download Advanced IoT sample courseware.

• Ready-to-teach package for a full-semester covering 50 hours of lab sessions
• The courseware comes with teaching slides and a training kit (with BeagleBone board, lab sheets and problem-based assignments for hands-on learning) and is designed to work with hardware instruments and Keysight software, forming a complete teaching solution
• Courseware integrates hands-on industry relevant experiences and real-world applications in IoT design and testing
• Participant in University Student Certification Program

Keysight’s ready-to-teach Advanced IoT courseware is designed to assist educators in quickly setting up new engineering courses on the Internet of Things, with the intention of producing students who will fully understand the challenges and requirements of the IoT system design cycle, from design and validation to deployment in the market. In addition to teaching practical design and test techniques from the fundamentals of system design to wireless communication and power measurement, this courseware will also cover critical design considerations that have emerged with the evolution of the Internet of Things, such as cybersecurity, compliance and continuity.

The Wireless Connectivity and Network Security is a ready-to-teach package starting from portion of IoT System Design and Validation Fundamentals. The courseware than moves into how to develop typical IoT applications with various types of wireless connectivity and compliance study. It also covers IoT device and network security learning.

Looking for the courseware without teaching slides? Check out the U3815A IoT Wireless Communication and Compliance, with Training Kit and Lab Sheet.

Recommended Instruments/software:

• N9000B CXA Signal Analyzer - Multi-touch, 9 kHz to 26.5 GHz
• U3838A Anechoic Chamber - Portable Wireless Anechoic Test Chamber
• 89600 VSA software – Vector signal analysis tool for demodulation and vector signal analysis
• N9077EM0E, N9081EM0E and N6141EM0E - X series measurement application (WLAN, Bluetooth, EMI) - benchtop and modular signal analyzers

Recommended year of study:

• Third to final year undergraduates

Note:

The SeeedStudio BeagleBone® Green Wireless (BBGW) Development Board is required to form a complete IoT training kit.

The BeagleBone® Green Wireless can be shipped to the following countries:

USA, Canada, Europe, United Kingdom, China, Russia, Japan, Korea, Vietnam, Malaysia, Hong Kong, Singapore, Thailand, India, Switzerland, Australia, New Zealand, Philippines, Taiwan, Indonesia, Brazil, Turkey, Colombia, Saudi Arabia and Mexico

The BeagleBone® Green Wireless must be purchased separately for countries that are not listed above.

https://www.beagleboard.org/boards/seeedstudio-beaglebone-green-wireless

Download Advanced IoT sample courseware.

• Ready-to-teach package for a full-semester covering 50 hours of lab sessions
• The courseware comes with a training kit (with BeagleBone board, lab sheets and problem-based assignments for hands-on learning) and is designed to work with hardware instruments and Keysight software, forming a complete teaching solution
• Courseware integrates hands-on industry relevant experiences and real-world applications in IoT design and testing
• Participant in University Student Certification Program

Keysight’s ready-to-teach Advanced IoT courseware is designed to assist educators in quickly setting up new engineering courses on the Internet of Things, with the intention of producing students who will fully understand the challenges and requirements of the IoT system design cycle, from design and validation to deployment in the market. In addition to teaching practical design and test techniques from the fundamentals of system design to wireless communication and power measurement, this courseware will also cover critical design considerations that have emerged with the evolution of the Internet of Things, such as cybersecurity, compliance and continuity.

The Wireless Connectivity and Network Security is a ready-to-teach package starting from portion of IoT System Design and Validation Fundamentals. The courseware then moves into how to develop typical IoT applications with various types of wireless connectivity and compliance study. It also covers IoT device and network security learning.

Looking for the courseware offers teaching slides? Check out the U3816A IoT Wireless Communication and Compliance, with Training Kit, Teaching Slide and Lab Sheet.

Recommended Instruments/software:

• N9000B CXA Signal Analyzer - Multi-touch, 9 kHz to 26.5 GHz
• U3838A Anechoic Chamber - Portable Wireless Anechoic Test Chamber
• 89600 VSA software – Vector signal analysis tool for demodulation and vector signal analysis
• N9077EM0E, N9081EM0E and N6141EM0E - X series measurement application (WLAN, Bluetooth, EMI) - benchtop and modular signal analyzers

Recommended year of study:

• Third to final year undergraduates

Note:

The SeeedStudio BeagleBone® Green Wireless (BBGW) Development Board is required to form a complete IoT training kit.

The BeagleBone® Green Wireless can be shipped to the following countries:

USA, Canada, Europe, United Kingdom, China, Russia, Japan, Korea, Vietnam, Malaysia, Hong Kong, Singapore, Thailand, India, Switzerland, Australia, New Zealand, Philippines, Taiwan, Indonesia, Brazil, Turkey, Colombia, Saudi Arabia and Mexico

The BeagleBone® Green Wireless must be purchased separately for countries that are not listed above.

https://www.beagleboard.org/boards/seeedstudio-beaglebone-green-wireless

Download Advanced IoT sample courseware.

• Ready-to-teach package for a full-semester covering 50 hours of lab sessions
• The courseware comes a training kit (with BeagleBone board, lab sheets and problem-based assignments for hands-on learning) and is designed to work with hardware instruments and Keysight software, forming a complete teaching solution
• Courseware integrates hands-on industry relevant experiences and real-world applications in IoT design and testing
• Participant in University Student Certification Program

Keysight’s ready-to-teach Advanced IoT courseware is designed to assist educators in quickly setting up new engineering courses on the Internet of Things, with the intention of producing students who will fully understand the challenges and requirements of the IoT system design cycle, from design and validation to deployment in the market. In addition to teaching practical design and test techniques from the fundamentals of system design to wireless communication and power measurement, this courseware will also cover critical design considerations that have emerged with the evolution of the Internet of Things, such as cybersecurity, compliance and continuity.

The IoT System Design and Validation Fundamentals lab setup is a ready-to-teach package focusing on the fundamentals of the Internet of Things and embedded system design. It introduces students to IoT architecture, technologies, standards, wireless protocols, applications, and ecosystems. It also covers IoT embedded system design that includes device cybersecurity basics.

Looking for the courseware offers teaching slides? Check out the U3814A IoT System Design and Validation Fundamentals, with Training kit, Teaching Slide and Lab Sheet.

Recommended Instruments:

• 34465A Digital Multimeter - Digital multimeter with data logging, digitizing and auto calibration
• DSOX1204G Oscilloscope - 70/100/200 MHz, 4 Analog Channels, with a built-in waveform generator

Recommended year of study:

• Second to final year undergraduates

Note:

The SeeedStudio BeagleBone® Green Wireless (BBGW) Development Board is required to form a complete IoT training kit.

The BeagleBone® Green Wireless can be shipped to the following countries:

USA, Canada, Europe, United Kingdom, China, Russia, Japan, Korea, Vietnam, Malaysia, Hong Kong, Singapore, Thailand, India, Switzerland, Australia, New Zealand, Philippines, Taiwan, Indonesia, Brazil, Turkey, Colombia, Saudi Arabia and Mexico

The BeagleBone® Green Wireless must be purchased separately for countries that are not listed above.

https://www.beagleboard.org/boards/seeedstudio-beaglebone-green-wireless

Download Advanced IoT sample courseware.

• Editable Microsoft PowerPoint slides
• Covers 45 hours of teaching

More than 400 editable Microsoft PowerPoint teaching slides, covering 45 hours of teaching for one full semester are provided. The slides cover the following topics:

• Basic RF/Microwave Concepts
• Transmission Lines and Impedance Matching
• Printed Circuit Boards (PCBs) and RF
• RF Test Bench Accessories
• Popular RF Instruments (SA, VNA & PM) and Measurement Error Correction
• Basics of Antennas and Radio Propagation
• Overview of Transceiver Architectures
• Filter Function and Measurements
• Low Noise Amplifier Function and Measurements
• Power Amplifier Function and Measurements
• RF Oscillator Function and Measurements
• Mixer Function and Measurements

Keysight UU102LAB is a semiconductor teaching lab solution focused on parametric testing and on-wafer measurement. It provides universities with a complete, industry aligned learning environment that exposes students to real world semiconductor measurement practices.

The solution includes a probe station, Keysight B1500A Parameter Analyzer, three DUT units, and 13 hours of structured, hands-on laboratory exercises delivered across seven guided labs.

Through structured, guided lab exercises, students learn to:

• C-V measurements and capacitance analysis.
• IV Measurement labs and threshold voltage extraction.
• Ultra low current measurement and leakage characterization.
• Pulsed measurements and self-heating mitigation.
• Advanced data analysis and interpretation.

For universities, UU102LAB delivers clear value by:

• Exposing students to realistic engineering challenges such as noise, accuracy, and measurement limits.
• Aligning coursework with industry expectations for device characterization engineers.
• Enables universities to deliver industry relevant learning experiences using professional grade instrumentation and measurement techniques.
• Differentiating the institution with a curriculum that mirrors professional lab workflows.

Keysight UU103LAB is a semiconductor teaching lab solution designed to provide students with the foundational expertise required for advanced photonic device testing and optical coupling optimization.

It provides universities with a complete, industry aligned learning environment that exposes students to real world semiconductor measurement practices.

The solution includes a probe station, Keysight N7778C Tunable Laser Source, N7788C Component Analyzer, B2901CL Source Measure Unit, N7786C Polarization Synthesizer, N7742C Optical Power Meter, three Photonic IC DUT units, Lambdascan Measurement Software and 18 hours of structured, hands-on laboratory exercises delivered across six guided labs.

Through Structured, Guided Lab Exercises, Students Learn To:

• Students gain hands-on experience with the same high-performance tools and measurement techniques (such as single-sweep Mueller Matrix analysis) used in high-volume foundry test stations.
• Apply the priciples of Total Internal Reflection (TIR), waveguide geometries, and photodetector responsivity through practical application.
• Diverse coupling techniques, including both edge coupling for mode matching and surface grating couplers for volume testing.

For Universities, UU103LAB Delivers Clear Value By:

• Equip students with hands-on experience in photonic IC testing, optical coupling, and device characterization using industry-relevant measurement workflows.
• Ready-to-use laboratory experiments and structured teaching modules allow educators to quickly integrate advanced photonics measurement into their curriculum.
• Differentiating the institution with a curriculum that mirrors professional lab workflows.