Good, Better, Best Value Bundles Keysight N9000B CXA Signal Analyzer

Flyers

Ordering Options for Your CXA is Easier, Faster, and More Economical!

The N9000B CXA signal analyzer is crafted for essential RF and microwave signal characterizations, that span from frequency selective power measurements, to noise analysis, EMI emission test, and digital signal demodulation analysis. Keysight made the CXA signal analyzer scalable via kinds of performance options to address your different testing needs while remain cost-effective. Knowing what options you need to order could be intimidating, so we have just put together a set of Good, Better, Best value bundles – making ordering these options easier, faster and more economical than ever before.

Performance options

Built-in preamplifiers:

One of the primary ways you use spectrum analyzers is for searching out and measuring low-level signals. The limitation in these measurements is the noise generated within the spectrum analyzer itself, that appears on the display as the noise floor (also known as displayed average noise level (DANL)), and the noise figure of the whole system. Signals below the DANL are masked by the noise and cannot be seen.

Therefore, you do whatever you can to set up the analyzer for its best sensitivity for detecting low-level narrwoband signals. Besides common methods such as reducing the input attentuation, using minmum resolution bandwidth and video resolution bandwidth, you can also use the built-in preamplifier to improve the noise floor of the N9000B CXA signal analyzer:

• Option P03: Preamplifier, 3 GHz

• Option P07: Preamplifier, 7.5 GHz

Fine resolution attenuator:

You get optimized signal power hitting at the mixer of the analyzer by adjusting the input attenuator. N9000B offers 10-dB steps for its attenuator as standard, and option FSA allows smaller footprint that is down to 2-dB steps.

Precision frequency reference:

The higher aging rate of the reference, the better frequency readout accuracy is for a signal analyzer. Option PFR (precision frequency reference) improves the aging rate of the reference of the CXA signal analyzer from ±1×10-6/year to ±1×10-7/year

Unlock Content

*Indicates required field

Change email? Email*Required Field

First name*Required Field

Last name* Required Field

Country/area*Required Field

Company*Required Field

Industry*Required Field

Years of experience*Required Field

Job level*Required Field

Job responsibility*Required Field

Job role*Required Field

Send me email updates about new products, resources, and events

Are you interested in speaking with a salesperson? Not at this time Yes

Select a preferred method of communication*Required Field

Select a preferred method of communication

Phone*Required Field

Please have a sales representative contact me. Learn

By continuing, you are providing Keysight with your personal data. See the Keysight Privacy Statement for information on how we use this data.

Thank you

Your form has been successfully submitted.

Your access will reset once your browser cookie expires, or browser cache is cleared. To regain access to the content, simply sign-in again.

Please have a salesperson contact me.

*Indicates required field

Select a preferred method of communication*Required Field

Change email? Email

Phone*Required FieldPlease enter a valid phone number without spaces or special characters.

Send me email updates about new products, resources, and events

By continuing, you are providing Keysight with your personal data. See the Keysight Privacy Statement for information on how we use this data.

Thank you

A sales representative will contact you soon.

What are you looking for?

Welcome

Good, Better, Best Value Bundles Keysight N9000B CXA Signal Analyzer

What are you looking for?