16900AU Windows 7 Upgrade Kits for 16901A and 16902B

• 16900AU-W7N **: 16901A Internal HDD Windows 7 upgrade for M880 MB, includes imaged 500 GB drive and 4 GB RAM
• 16900AU-W7E **: 16901A External HDD Windows 7 upgrade for M880 MB, includes imaged 500 GB drive and 4 GB RAM
• 16900AU-W7A ****: 16901A Additional external HDD Windows 7 upgrade for M880 MB, includes imaged 500 GB drive
• 16900AU-W7R: 16902B Windows 7 upgrade for M880 MB, includes imaged 80 GB SSD drive and 4 GB RAM
• 16900AU-W7B *****: 16902B additional HDD Windows 7 upgrade for M880 MB, includes imaged 80 GB SSD drive
• 16900AU-MBN: 16901A internal HDD Windows 7 upgrade to M890 MB, includes MB and imaged 500 GB drive
• 16900AU-MBE: 16901A external HDD Windows 7 upgrade to M890 MB, includes MB and imaged 500 GB drive
• 16900AU-MBR: 16902B HDD Windows 7 upgrade to M890 MB, includes MB and imaged 80 GB SSD drive

All 16800 Series, 16901A, and 16902B logic analyzers with serial number MY51420101 or greater already have the M890 motherboard in them and are already running Windows 7 operating system.

All kits must be installed by the Roseville, California Keysight Repair Center with the exception of additional hard drive kits that also offer an option to be customer installed. Approximate installation fees are outlined below.

System performance (CPU intensive operations and IO intensive operations) will be significantly improved by the Windows 7 upgrade kits which upgrade from the M880 motherboard to the M890 motherboard. Typical improvement is around twice the performance.

Upgrade kits that add additional memory to the existing M880 motherboard will yield performance similar to or slightly better than the original M880 motherboard running Windows XP but without the additional memory.

There is also the E5862A additional external, removable Windows 7 bootable 500G HHD hard drive assembly available for the 16901A logic analyzer modular frame running Windows 7 on M890 motherboards. These 16901A logic analyzer modular frames must have already been set up to boot from an external drive in order to use the E5862A. This would be the case if they purchase the M890 motherboard upgrade kit 16900AU-MBE or on new 16901A logic analyzer frames with Option 109.

There is also the E5863A additional, slide-in internal removable Windows 7 bootable 80G SSD hard drive assembly available for the 16902B logic analyzer modular frames running Windows 7 on M890 motherboards. This would be the case if they purchase the M890 motherboard upgrade kit 16900AU-MBR.

For 16800 Series Windows 7 upgrade kits, see 16800AU 

Windows 7 Upgrade Kits

UPGRADE TO WINDOWS 7 VIA A MOTHERBOARD UPGRADE TO M890 WITH NEW INTERNAL DRIVE (For analyzers with S/N < MY51420101 which had Windows XP)

UPGRADE TO WINDOWS 7 VIA ADDING MEMORY TO EXISTING M880 MOTHERBOARD WITH NEW INTERNAL DRIVE (For analyzer with S/N MY46000101-MY51420100)

UPGRADE TO WINDOWS 7 VIA A MOTHERBOARD UPGRADE TO M890 WITH NEW EXTERNAL DRIVE (For analyzers with S/N < MY51420101 which had Windows XP)

UPGRADE TO WINDOWS 7 VIA ADDING MEMORY TO EXISTING M880 MOTHERBOARD WITH NEW EXTERNAL DRIVE (For analyzer with S/N MY46000101-MY51420100)

See below for extra external HDDs and extra removable HDDs

ADDITIONAL EXTERNAL/REMOVEABLE HDDs FOR M880 MOTHERBOARD UNITS ALREADY UPGRADED to WINDOWS 7
(For analyzers with S/N MY46000101-MY51420100) 

 ADDITIONAL EXTERNAL/REMOVEABLE HDDs FOR M890 MOTHERBOARD UNITS ALREADY UPGRADED to WINDOWS 7

** 16901 Series logic analyzers with serial numbers MY46000101-MY46000399 have the Intel 915GUX motherboard and cannot use either the 16900AU-W7N or 16900AU-W7E upgrade kits since they are for the M880 motherboard. The 16900AU-W7E cannot be used to convert a 16901A modular logic analyzer frame from using an internal drive to an external drive.

**** This option requires that the 16900AU-W7E has already been applied to the 16901A logic analyzer modular frame to increase its RAM to 4G, and which is necessary in order to run Windows 7. The 16900AU-W7A cannot be used to convert a 16901A modular logic analyzer frame from using an internal drive to using an external drive. If ordered separately from the 16900AU-W7E, a customer can choose to either have the spare drive shipped to the customer site for self-installation, including license installation, or have the drive installed at the service center. Installation charge for single drive, purchased alone, is $660. The installation charge is $300 per additional drive, or when combined with other upgrades.

***** This option requires that 16900AU-W7R has already been applied to the 16902B Series logic analyzer. If ordered separately from the 16900AU-W7R, a customer can choose to either have the spare drive shipped to the customer site for self-installation, including license installation, or have the drive installed at the service center. Installation charge for single drive, purchased alone, is $660. The installation charge is $300 per additional drive, or when combined with other upgrades.