How to Generate an RF Carrier Signal

Get quote
PSG Analog Signal Generator
+ PSG Analog Signal Generator
PSG Analog Signal Generator
+ PSG Analog Signal Generator

Generating an RF carrier signal with a signal generator

Generating an RF carrier signal requires a metrology-grade signal generator with excellent distortion and spurious characteristics to ensure high spectral purity. The high-frequency waveform must have a low short-term drift in frequency and low phase noise. It must also be free of spurious and flicker noise. A common method of measuring spectral purity is to measure single-sideband phase noise in a 1 Hz bandwidth versus the offset from the carrier.

To set up the RF signal generator, select the frequency and amplitude from the front panel. The generator will typically operate in default mode. However, there are numerous options to tailor the signal’s performance, depending on the application. The option for low phase noise with a selectable frequency offset may be a priority in a narrow bandwidth communication. Select the signal-to-noise ratio optimization option to minimize the broadband noise.

RF carrier signal source solution

Generating an RF carrier signal with the highest spectral purity requires a metrology-grade signal generator with excellent distortion and spurious characteristics. The Keysight PSG signal generator is an ideal solution for an RF carrier source with low phase noise. The frequency range extends to 67 GHz, and extender modules can generate up to 1.1 THz. With the option to output more than 30 dBm of output power, it is suitable for testing high-power devices and overcoming test system losses.

Get quote

See demo of RF carrier signal generator

Explore products in our RF carrier signal source solution

Related use cases

How to Characterize 6G Sub-THz Wideband Signals

Engineers researching 6G H-band implementations require a wideband modulated signal generator with a high carrier frequency signal to evaluate 6G RF waveform performance. Learn how to characterize sub-THz wideband signals in the H-band using a 6G research testbed with custom modulation signal generation software.

Learn more

How to Characterize 802.11ad Devices

Characterizing 802.11ad devices requires the generation and analysis of waveforms at baseband, IF, RF, and mmWave frequencies. Learn how to characterize wireless gigabit devices with three essential elements — waveform generation, frequency conversion, signal, modulation, and spectrum analysis.

Learn more

How to De-embed Fixtures and Correct Mismatch Errors

Minimizing the uncertainty in your measurement setup requires delivering predictable and repeatable signals to your device under test (DUT). Learn how to easily de-embed and match correct test fixtures with a signal generator and an embedded reflectometer.

Learn more

contact us logo

Get in touch with one of our experts

Need help finding the right solution for you?

Contact us