Accessories

• Provide a single RF output for full frequency coverage from 9 kHz to 7.2 GHz and 160 MHz modulation bandwidth
• Control from an MXG/EXG front panel as usual and automate the test systems using the same SCPI commands via LAN, GPIB, or USB
• Generate an 802.11ax 160 MHz bandwidth signal at 7.2 GHz and achieve excellent EVM performance < -47 dB (0.45%) for output power up to +5 dBm

The N5182BX07 Frequency Extender extends any N5182B MXG or N5172B EXG with Option 506 to cover the 802.11ax bands and 5G unlicensed bands up to 7.2 GHz with exceptional error vector magnitude (EVM). Take your devices and designs to the limit with the N5182BX07 Frequency Extender.

The N522xB PNA/N524xB PNA-X network analyzer with the N5292A test set controller and the NA5307A 250 GHz frequency extenders provides fully calibrated broadband, single-sweep S-parameter measurements from 100 kHz/10 MHz to 250 GHz.

The NA5307A frequency extender is equipped with a ruggedized a 0.5 mm coaxial male test port connector. It is a compact and lightweight module that is driven and controlled with a PNA/PNA-X network analyzer and a P9500A frequency extender hub via USB.

The broadband VNA measurement setup can be accurately calibrated with the 85065A 0.5 mm coaxial precision calibration kit, which includes 16 calibration standards within the entire frequency range.

• Single-sweep broadband S-parameter measurement from 100 kHz/10 MHz to 250 GHz
• Built-in bias tee
• Built-in 1.2 m or 1.8 m interface cable
• 4-port configuration for 2-port differential measurement
• 85065A 0.5 mm precision mechanical calibration kit up to 250 GHz
• ≥ 0 dBm output power up to 170 GHz
• System dynamic range

≥ 110 dB for 20 GHz to 170 GHz

≥ 105 dB for 170 GHz to 220 GHz

≥ 75 dB for 220 GHz to 250 GHz

• 0.1 dB receiver compression @ +10 dBm

• Wide frequency range from 10 MHz to 110 GHz (no bias tee)
• Built-in 1.2 m interface cable for connection to N5292A controller
• Typical maximum power of 0 dBm from 90 GHz to 110 GHz
• Typical sweep range from -60 dBm to the maximum power
• Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz

Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.

The N5293AX01 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.

The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 10 MHz to 110 GHz.

For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.

• Wide frequency range from 900 Hz to 120 GHz, with PNA/PNA-X’s low frequency extension (LFE) option
• Built-in bias tee
• Built-in 1.8 m interface cable for connection to N5292A controller
• Typical maximum power of +8 dBm to 60 GHz, +5 dBm to 110 GHz, +4 dBm to 120 GHz
• Typical sweep range from -60 dBm to the maximum power
• Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz, -100 dBm to 120 GHz
• Typical performance to 125 GHz, operational over-range frequency 130 GHz

Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.

The N5295AX53 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.

The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 900 Hz to 120 GHz.

For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.

• Wide frequency range from 10 MHz to 110 GHz (No bias tee)
• Built-in 1.8 m interface cable for connection to N5292A controller
• Typical maximum power of 0 dBm from 90 GHz to 110 GHz
• Typical sweep range from -60 dBm to the maximum power
• Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz

Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.

The N5293AX51 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.

The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 10 MHz to 110 GHz.

For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.

• Wide frequency range from 900 Hz to 110 GHz, with PNA/PNA-X’s low frequency extension (LFE) option.
• Built-in bias tee.
• Built-in 1.8 m interface cable for connection to N5292A controller.
• Typical maximum power of 0 dBm from 90 GHz to 110 GHz.
• Typical sweep range from -60 dBm to the maximum power.
• Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz.

Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.

The N5293AX53 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.

The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 900 Hz to 110 GHz.

For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.

• Wide frequency range from 10 MHz to 120 GHz (no bias tee).
• Built-in 1.2 m interface cable for connection to N5292A controller.
• Typical maximum power of +8 dBm to 60 GHz, +5 dBm to 110 GHz, +4 dBm to 120 GHz.
• Typical sweep range from -60 dBm to the maximum power.
• Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz, -100 dBm to 120 GHz.
• Typical performance to 125 GHz, operational over-range frequency 130 GHz.

Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.

The N5295AX01 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.

The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 10 MHz to 120 GHz.

For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.

The N522xB PNA/N524xB PNA-X network analyzer with the N5292A test set controller and the NA5305A 170 GHz frequency extenders provides fully calibrated broadband, single-sweep S-parameter measurements from 100 kHz/10 MHz to 170 GHz.

The NA5305A frequency extender is equipped with a ruggedized a 0.5 mm coaxial male test port connector. It is a lightweight module that is driven and controlled with a PNA/PNA-X network analyzer and a P9500A frequency extender hub via USB. 

The broadband VNA measurement setup can be accurately calibrated with the 85065A 0.5 mm coaxial precision calibration kit, which includes 16 calibration standards within the entire frequency range.

• Single-sweep broadband S-parameter measurement from 100 kHz/10 MHz to 170 GHz
• Built-in bias tee
• Built-in 1.2 m or 1.8 m interface cable
• 4-port configuration for 2-port differential measurement
• 85065A 0.5 mm precision mechanical calibration kit covering the entire frequency range
• ≥ 0 dBm output power up to 170 GHz
• ≥ 110 dB system dynamic range, 20 GHz to 170 GHz
• 0.1 dB receiver compression @ +10 dBm

• Wide frequency range from 900 Hz to 120 GHz, with PNA/PNA-X’s low-frequency extension (LFE) option
• Built-in bias tee
• Built-in 1.2 m interface cable for connection to N5292A controller
• Typical maximum power of +8 dBm to 60 GHz, +5 dBm to 110 GHz, +4 dBm to 120 GHz
• Typical sweep range from -60 dBm to the maximum power
• The typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz, -100 dBm to 120 GHz
• Typical performance to 125 GHz, operational over-range frequency 130 GHz

Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.

The N5295AX03 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.

The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 900 Hz to 120 GHz.

For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.

• Wide frequency coverage from 10 MHz to 120 GHz with PNA/PNA-X
• Built-in bias tee
• Ruggedized 1 mm connector
• 1.2m interface cable for connection to N5292A controller
• Compact size and light weight
• Typical maximum power of +8 dBm to 60 GHz, +5 dBm to 120 GHz
• Typical sweep range from -60 to the maximum power
• Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 120 GHz

The N5295AX02 is a broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions. It is a compact, light-weight, and ruggedized frequency extender module with built-in bias tee for pulsed DC bias operation designed to interface with N5292A test set controller that is driven with a PNA/PNA-X B series network analyzer. The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 10 MHz to 120 GHz. For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.

Extend the Frequency of the N9042B UXA X-Series Signal Analyzer to 110 GHz

The innovative V3050A Signal Analyzer Frequency Extender gives you unmatched measurement accuracy of wideband signals at very high frequencies. It provides:

• Outstanding sensitivity 
• Unbanded and preselected frequency coverage up to 110 GHz
• High dynamic range 
• Seamless interface to the N9042B UXA signal analyzer

NOTE: Export restrictions apply to frequencies > 90 GHz

• Wide frequency range from 900 Hz to 110 GHz, with PNA/PNA-X’s low frequency extension (LFE) option
• Built-in bias tee
• Built-in 1.2 m interface cable for connection to N5292A controller
• Typical maximum power of 0 dBm from 90 GHz to 110 GHz
• Typical sweep range from -60 dBm to the maximum power
• Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz

Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.

The N5293AX03 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.

The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 900 Hz to 110 GHz.

For more information about cable and accessories for use with network analyzers, please visit Accessories.