Keysight Cellular Base Station Design Emulators

Discover Keysight Cellular Base Station Design Emulators, enabling end-to-end 5G infrastructure validation by emulating radio environments, user behavior, and core-network conditions. These scalable hardware and software solutions support ORAN, UE, pre-silicon, timing-sync, performance testing, and virtual drive test workflows.

S8802A mmWave Base Station Fading Performance Toolset

The Keysight S8801A MIMO Base Station Fading Performance Toolset enables you to reliably and cost-effectively test base station designs in a lab. It provides a fully integrated and automated turnkey testing solution for 5G FR1 base stations’ MIMO RF measurements and full protocol stack interoperability.

S8801A MIMO Base Station Fading Performance Toolset

Keysight’s S8801A MIMO Base Station Fading Performance Toolset solves the testing challenges by enabling you to reliably and cost effectively test your base station designs in a laboratory. It provides a fully integrated and automated turn-key testing solution for 5G FR1 base stations’ MIMO RF measurements and full protocol stack interoperability, as well as data throughput performance verification and optimization with real UEs.

DC Power Supplies for Base Station Testing

Using Keysight DC power supplies in base station subassembly, module and final test to maximize test throughput and minimize cost of test.

Overcoming Challenges of Testing MSR Base Stations

Find how to overcome the multifaceted challenge of testing MSR base stations using signal analyzers with the 89600 VSA software for MSR developers.

5G Base Station Test Solutions Catalog

5G New Radio (NR) introduces wider bandwidths, millimeter-wave (mmWave) frequencies, massive multiple input / multiple output (mMIMO), beamforming, and other innovations that radically change the design, test, and optimization of base stations.

S8803A Massive MIMO Base Station Fading Performance Toolset

The key challenge of 5G arises from the above 2 4GHz millimeter-wave frequencies introduced in 5G NR. The Keysight S8802A mmWave Base Station Fading Performance Toolset enables you to test your designs reliably and cost-effectively in a lab.

Solutions for Testing Multi-Standard Radio Base Stations

Find out how 89600 VSA software and X-Series signal analyzers enable fast and accurate testing of multi-standard radio base stations transmitter devices.

Testing NTN Base Stations with Keysight UeSIM and PROPSIM

Keysight offers test solutions for the entire NTN including Base Station test, User Equipment test and satellite channel emulation. Keysight integrates 5G network and real-world channel emulation hardware and software to create an end-to-end mixed terrestrial and space lab-based test bed to realistically simulate a wide range of orbit trajectories. The solution uses dynamic multipath propagation to emulate ground-to-satellite, satellite-to-ground, and ground-to-ground satellite links. This provides holistic performance verification of terrestrial and non-terrestrial infrastructure as well as 5G NTN devices. This Application Note describes the important steps needed for NTN testing in 5G Base Stations using UeSIM and PROPSIM.

Addressing DC Power Test Challenges for Base Station Subassemblies

How to address DC power test challenges during development and production test of base station subassemblies using DC power analyzers and modular power system.

Base Station Measurement Automation Solution

Keysight’s P7000 Base Station Measurement Automation Solution is a software platform that provides preconfigured test cases to simplify measurement tasks and develop additional or specific test cases.

5G New Radio Base Station Test Solutions

The Keysight S91XX Series 5G Multi-Band Vector Transceivers deliver ACLR and EVM performance for improved measurement insight and reduced measurement uncertainty.

LTE-Advanced Base Station Transmitter RF Conformance Testing

See how Keysight‘s LTE-Advanced solutions help you characterize LTE-Advanced base station transmitters to address challenges that arise from carrier aggregation.

Optimize Signal Quality In 5G Private Network Base Stations

Enterprises can harness the advantages of 5G private networks for businesses with support from the Third Generation Partnership Project (3GPP) standards, Release 16, and more. In order to provide a comprehensive coverage of 5G new radio (NR) private network, 5G NR measurement applications running on a signal analyzer should be able to measure and interpret transmitter tests. Some key tests include output power, output power dynamics, transmit ON/OFF power, transmit signal quality, unwanted emissions, and transmitter intermodulation. Therefore, it is essential to select testing devices that can provide robust performance and ensure that the base station transmitters in the network perform to standards. To characterize and test millimeter-wave (mmWave) products' true performance, designers and manufacturers need to address testing challenges that make the signal quality more susceptible to impairments. Error vector magnitude (EVM) measurement can give powerful insight into the performance of a digital communication base station transmitter and is one of the primary metrics to assess the quality of the transmitted signal. This white paper will discuss the EVM measurement as a key component of transmit signal quality in 5G private network base stations, the testing challenges that mmWave poses, and the Keysight solutions that address these challenges.

Designing and Testing 3GPP W-CDMA Base Transceiver Stations (including Femtocells)

Physical layer aspects of W-CDMA BTS. Provides a brief overview of W-CDMA technology and femtocells. Discusses design issues, measurement concepts & performance tests required by 3GPP specifications.

E-UTRA Base Station Transmit ON/OFF Power Measurement

See how Keysight’s N9082A LTE TDD Measurement Application makes standards-compliant E-UTRA base station transmit ON/OFF power measurements.

Cellular Device Testing Catalog

Explore the comprehensive range of Keysight cellular device testing solutions engineered for functional, RF, protocol, performance, and carrier acceptance testing. This catalog highlights UE, IoT, and 5G device test platforms designed for development, certification, validation, and high‑throughput production workflows.

Stay Compliant with 5G NR Base Station Transmitter Testing: Part 1

Conformance testing is an essential part of the base station life-cycle, which requires an in-depth understanding of 3rd Generation Partnership Project (3GPP) specifications.

Ensure Your Base Station Transmitter Complies with 5G NR Rel 16

In light of ever-evolving standards, test solutions need to support higher frequencies, wider bandwidths, and new physical layer capabilities. Thanks to the much faster, more reliable, and near-instant connections that come with the 5G, we now see a variety of innovative and comprehensive mobile wireless communication applications every day. Base stations must now pass new conformance tests to ensure they deliver on their promises. Performing conformance testing is an important part of the base station lifecycle, which requires a thorough understanding of 3rd generation partnership project (3GPP) specifications. This paper discusses 5G NR Release 16 base station transmitter conformance testing requirements and the specific challenges that arise in millimeter wave (mmWave) frequency testing. We will also discuss how to stay compliant with standards using the new designs in Keysight signal analysis solutions, when testing your base station transmitters.

Ensuring Your Base Station Transmitter Complies with 5G NR Rel 16

In light of ever-evolving standards, test solutions need to support higher frequencies, wider bandwidths, and new physical layer capabilities. Thanks to the much faster, more reliable, and near-instant connections that come with the 5G, we now see a variety of innovative and comprehensive mobile wireless communication applications every day. Base stations must now pass new conformance tests to ensure they deliver on their promises. Performing conformance testing is an important part of the base station lifecycle, which requires a thorough understanding of 3rd generation partnership project (3GPP) specifications. This paper discusses 5G NR Release 16 base station transmitter conformance testing requirements and the specific challenges that arise in millimeter wave (mmWave) frequency testing. We will also discuss how to stay compliant with standards using the new designs in Keysight signal analysis solutions, when testing your base station transmitters. Maximize your budget with rentals of Keysight test equipment.