尋找感興趣的產品?
N1010A FlexDCA 取樣示波器軟體
N1010A FlexDCA 取樣示波器軟體提供示波器、眼圖/波罩、抖動和 TDR 量測功能,可用來控制相容的 Keysight DCA 儀器。
FlexDCA 安裝程式包含下列各項最新更新 *:
- FlexDCA 軟體套件:N1010100A R&D、N1010200A MFG 和 N1010300A SI
- FlexPLL,適用於鎖相迴路量測
- FlexRT,適用於在 UXR 系列示波器上進行光學量測
- FlexOTO,適用於在 DCA-M 系列示波器上最佳化光學量測
* 需要提供有效支援的軟體授權
注意:是德科技將於 2024 年 9 月停止對 86100D 提供 FLEXDCA 支援
預定於 2024 年 9 月發布的 FlexDCA A.07.80,不再支援安裝在 86100D 主機。 如欲持續獲得 FlexDCA 更新,請考慮將您的 86100D 換購為 N1000A(舊換新優惠方案)。 請聯絡您所在地的是德科技業務工程師,以討論更多選項:www.keysight.com/find/contactus。
請參閱 N1010A FlexDCA 86100D 支援通知和常見問答集以獲得詳細資訊。
發佈日期 | 版本 | 版本說明 |
---|---|---|
2023-11-07 | A.07.50.258 | Adds Low SNR mode to the TDECQ equalizer, Pulse Fit Signal Processing, Fast Tuning mode for FlexOTO DUT power tuning, support for the M8199B AWG, updated TDR AFR wizard, hardware option CRX for the N1092-CDR, 12 edge jitter measurement improvements, and Extinction Ratio Correction Factors (ERCF). Multiple improvements and fixes for FlexOTO and FlexPLL. |
發佈日期 | 版本 |
---|---|
2023-11-07 | A.07.50.258 |
版本說明 |
---|
Adds Low SNR mode to the TDECQ equalizer, Pulse Fit Signal Processing, Fast Tuning mode for FlexOTO DUT power tuning, support for the M8199B AWG, updated TDR AFR wizard, hardware option CRX for the N1092-CDR, 12 edge jitter measurement improvements, and Extinction Ratio Correction Factors (ERCF). Multiple improvements and fixes for FlexOTO and FlexPLL. |
如何下載
Click the download button and save the installation file to the target machine or to a location available to the target machine.
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- Does Not Require a License
支援文件
Installs on: PC / Instrument
作業系統
- Windows 11
- Windows 10
- Windows 7 64-bit
參加條件
- Always install the latest Microsoft Windows updates before installing a new version of software.
- To validate the installer file, check the SHA256 File Checksum: EC922AC98F921434E4DB28657BBFF2A986A0A9E9A74481A3280052A08FBC7463
- For Windows 7 PCs and 86100D instruments, manual installation of the DigiCert Trusted Root G4 Certificate and the Sectigo SHA-2 Root USERTrust RSA Certificate is required.
- .Net requires updated certificates to install. With a LAN connection, this certificate will update automatically during installation.
See FlexDCA Installation Troubleshooting Guide for additional information:
支援的儀器
- N1000A, 86100D, N1002A, N109xx, N107xx
如何下載
Click the download button and save the installation file to the target machine or to a location available to the target machine.
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- Does Not Require a License
支援文件
Installs on: PC / Instrument
作業系統
- Windows 11
- Windows 10
- Windows 7 64-bit
參加條件
- Always install the latest Microsoft Windows updates before installing a new version of software.
- To validate the installer file, check the SHA256 File Checksum: 8B383ABDF2A853D9746371715CB3896BCFDA86EF997D3B4923412FB23333C552
- For Windows 7 PCs and 86100D instruments, manual installation of the DigiCert Trusted Root G4 Certificate and the Sectigo SHA-2 Root USERTrust RSA Certificate is required.
- .Net requires updated certificates to install. With a LAN connection, this certificate will update automatically during installation.
See FlexDCA Installation Troubleshooting Guide for additional information:
支援的儀器
- N1000A, 86100D, N1002A, N109xx, N107xx
如何下載
Click the download button and save the installation file to the target machine or to a location available to the target machine.
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- Does Not Require a License
支援文件
Installs on: PC / Instrument
作業系統
- Windows 11
- Windows 10
- Windows 7 64-bit
參加條件
- Always install the latest Microsoft Windows updates before installing a new version of software.
- To validate the installer file, check the SHA256 File Checksum: 04545F49606318273278588DC31C8982A896254EC56A29829781EC48E2350C1B
- For Windows 7 PCs and 86100D instruments, manual installation of the DigiCert Trusted Root G4 Certificate and the Sectigo SHA-2 Root USERTrust RSA Certificate is required.
- .Net requires updated certificates to install. With a LAN connection, this certificate will update automatically during installation.
See FlexDCA Installation Troubleshooting Guide for additional information:
支援的儀器
- N1000A, 86100D, N1002A, N109xx, N107xx
如何下載
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
SHA256
8F33E42B0A89E42932280B0F37AAD57907F57258B2BF1309F168A9257628DC78
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- Does Not Require a License
支援文件
Installs on: PC / Instrument
作業系統
- Windows 10 64-bit
- Windows 7 64-bit
參加條件
- For Windows 7 PCs and
86100D instruments, manual installation of the DigiCert Trusted Root G4
Certificate is required. See ‘TN FlexDCA Installation Troubleshooting Guide’
for additional information.
- Important! Install latest Microsoft Windows updates before installing this revision.
- .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
支援的儀器
- N1000A, 86100D, N109xx, N107xx
如何下載
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
SHA256
06D9C5B3CCCC43D73FD7FBB750742212E24CC5F3DD8BD390E2B6031C129C9CBB
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- Does Not Require a License
支援文件
Installs on: PC / Instrument
作業系統
- Windows 10 64-bit
- Windows 7 64-bit
參加條件
- For Windows 7 PCs and
86100D instruments, manual installation of the DigiCert Trusted Root G4
Certificate is required. See ‘TN FlexDCA Installation Troubleshooting Guide’
for additional information.
- Important! Install latest Microsoft Windows updates before installing this revision.
- .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
支援的儀器
- N1000A, 86100D, N109xx, N107xx
如何下載
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- Does Not Require a License
支援文件
Installs on: PC / Instrument
作業系統
- Windows 10 64-bit
- Windows 7 64-bit
參加條件
- For Windows 7 PCs and
86100D instruments, manual installation of the DigiCert Trusted Root G4
Certificate is required. See ‘TN FlexDCA Installation Troubleshooting Guide’
for additional information.
- Important! Install latest Microsoft Windows updates before installing this revision.
- .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
支援的儀器
- N1000A, 86100D, N109xx, N107xx
如何下載
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- Does Not Require a License
支援文件
Installs on: PC / Instrument
作業系統
- Windows 10 64-bit
- Windows 7 64-bit
參加條件
- Important! Install latest Microsoft Windows updates before installing this revision.
- .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
支援的儀器
- N1000A, 86100D, N109xx, N107xx
如何下載
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- Does Not Require a License
支援文件
Installs on: PC / Instrument
作業系統
- Windows 10 64-bit
- Windows 7 64-bit
參加條件
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
支援的儀器
- N1000A, 86100D, N109xx, N107xx
如何下載
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- Does Not Require a License
支援文件
Installs on: PC / Instrument
作業系統
- Windows 10 64-bit
- Windows 7 64-bit
參加條件
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
支援的儀器
- N1000A, 86100D, N109xx, N107xx
如何下載
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- Does Not Require a License
支援文件
Installs on: PC / Instrument
作業系統
- Windows 10 64-bit
- Windows 7 64-bit
參加條件
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
支援的儀器
- N1000A, 86100D, N109xx, N107xx
如何下載
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- 不需要授權
支援文件
安裝於: PC / Instrument
作業系統
- Windows 10
- Windows 7 64-bit
參加條件
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
支援的儀器
- N1000A 86100D N109xx N107xx
如何下載
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- 不需要授權
支援文件
安裝於: PC / Instrument
作業系統
- Windows 10
- Windows 7 64-bit
參加條件
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
支援的儀器
- N1000A 86100D N109xx N107xx
如何下載
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
-
Run the installation package, following all prompts and instructions
授權
- 不需要授權
支援文件
安裝於: PC / Instrument
作業系統
- Windows 10
- Windows 7 64-bit
參加條件
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
支援的儀器
- N1000A 86100D N109xx N107xx
如何下載
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- 不需要授權
支援文件
安裝於: PC / Instrument
作業系統
- Windows 10
- Windows 7 64-bit
參加條件
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
支援的儀器
- N1000A 86100D N109xx N107xx
如何下載
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- 不需要授權
支援文件
安裝於: PC / Instrument
作業系統
- Windows 10
- Windows 7 64-bit
參加條件
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
支援的儀器
- N1000A 86100D N109xx N107xx
如何下載
Click the download button and save the appropriate upgrade file (32-bit or 64-bit) to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
如何安裝
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
授權
- 不需要授權
支援文件
安裝於: PC / Instrument
作業系統
- Windows 10
- Windows 7 64-bit
- Windows 7 32-bit
- NOTE: FlexDCA versions released July 2019 or later will no longer support 32-bit operating systems
參加條件
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
支援的儀器
- N1000A 86100D N1090A N1092A/B/C/D/E N1094A/B N1076A/B N1077A N1078A
如何下載
Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
如何安裝
Close all open programs and applications.
Run the installation package, following all instructions to install your new firmware version.
授權
- 不需要授權
支援文件
安裝於: PC / Instrument
作業系統
- Windows 10
- Windows 7 64-bit
- Windows 7 32-bit
參加條件
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
支援的儀器
- 86100D N1090A N1092A/B/C/D/E N1094A/B N1076A/B N1077A N1078A
如何下載
Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
如何安裝
Close all open programs and applications.
Run the installation package, following all instructions to install your new firmware version.
授權
- 不需要授權
支援文件
安裝於: PC / Instrument
作業系統
- Windows 10
- Windows 7 64-bit
- Windows 7 32-bit
參加條件
- 無相關資訊
支援的儀器
- 86100D 86100C N1092A/B/C/D/E N1090A N1076A 7N1078A
如何下載
Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
如何安裝
Close all open programs and applications.
Run the installation package, following all instructions to install your new firmware version.
授權
- 不需要授權
支援文件
安裝於: PC / Instrument
作業系統
- Windows 7 32-bit
- Windows 8 64-bit
- Windows 10
參加條件
- 無相關資訊
支援的儀器
- 86100D N1090A N1092x N1094x N1076A N1077A
如何下載
Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
如何安裝
Close all open programs and applications.
Run the installation package, following all instructions to install your new firmware version.
授權
- 不需要授權
支援文件
安裝於: PC / Instrument
作業系統
- Windows 8
- Windows 7
- Windows 10
參加條件
Install latest Microsoft Windows updates before installing this revision.
支援的儀器
- 86100D N1090A N1092x N1094x N1076A N1077A
如何下載
Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
如何安裝
Close all open programs and applications.
Run the installation package, following all instructions to install your new firmware version.
授權
- 不需要授權
支援文件
安裝於: PC / Instrument
作業系統
- Windows 8
- Windows 7
- Windows 10
參加條件
Install all Windows updates prior to installing this upgrade.
支援的儀器
- 86100D, N1090A, N1092x, N1076A, N1077A
如何下載
Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
如何安裝
Close all open programs and applications.
Run the installation package, following all instructions to install your new firmware version.
授權
- 不需要授權
安裝於: PC / Instrument
作業系統
- Windows 8
- Windows 7
- Windows 10
參加條件
Install all Microsoft Windows updates before installing this firmware.
支援的儀器
- 86100D, 86100C, N1090A, N4877A, N1092A/B/D
如何下載
- Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
如何安裝
- Close all open programs and applications.
- Run the installation package, following all instructions to install your new firmware version.
授權
- 不需要授權
安裝於: PC / Instrument
作業系統
- Windows 8
- Windows 7
參加條件
- Install all Microsoft Windows updates before installing this firmware.
支援的儀器
- 86100D 86100C N1090A
如何下載
- Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
如何安裝
- Close all open applications.
-
Run the installation package, following all instructions to install your new firmware version.
授權
- 不需要授權
安裝於: PC / Instrument
作業系統
- Windows 7 64-bit
- Windows 8 64-bit
- Windows Vista 64-bit
參加條件
- None
支援的儀器
- 86100D N1090A
如何下載
- Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
- For best results on the 86100D mainframe, use the rear panel USB ports.
如何安裝
- Close all open applications.
- Run the installation package, following all instructions to install your new firmware version.
授權
- 不需要授權
如何下載
Download the firmware upgrade file to the target PC or to a USB flash drive or LAN folder that will be available to the target PC.
如何安裝
Run installation package on the target PC , following all instructions to install your new firmware version.
授權
- 不需要授權
安裝於: PC / Instrument
作業系統
- Windows 8
- Windows 7
- Windows Vista
參加條件
64-bit Windows OS as noted above
支援的儀器
- 86100C, 86100D
如何下載
Download the firmware upgrade file to the target PC or to a USB flash drive or LAN folder that will be available to the target PC.
如何安裝
Run installation package on the target PC , following all instructions to install your new firmware version.
授權
- 不需要授權
如何下載
Download the firmware uprade file to the target PC or to a USB flash drive or LAN folder that will be available to the target PC.
如何安裝
Run the installation package on the target PC and run the installation package, following all instructions to install your new firmware version.
授權
- 不需要授權
支援文件
如何下載
Copy the firmware uprade file to a USB flash drive or LAN folder that will be available to the target PC.
如何安裝
Copy the upgrade file to the target PC and run the installation package, following all instructions to install your new firmware version.
授權
- 不需要授權
支援文件
安裝於: PC / Instrument
作業系統
- Windows 7
- Windows XP SP3
參加條件
86100C or 86100D mainframe running the latest version of firmware.
支援的儀器
- 86100C, 86100D
如何下載
Click the 'Download' button and save or transfer the installation file to target PC.
如何安裝
Run the executable installation file and follow all instructions to install on the target PC
授權
- 不需要授權
支援文件
如何下載
See Above
如何安裝
See Above
授權
- 不需要授權
如何下載
- 無相關資訊
如何安裝
授權
- 不需要授權
支援文件
如何下載
- 無相關資訊
如何安裝
授權
- 不需要授權
支援文件
安裝於: PC / Instrument
作業系統
- Windows 7
- Windows Vista
- Windows XP
參加條件
- See Above
支援的儀器
- 86100C DCA J and 86100D DCA X oscilloscopes
相關聯結
如何下載
- 無相關資訊
如何安裝
授權
- 不需要授權
安裝於: PC / Instrument
作業系統
- Windows 7
- Windows Vista
- Windows XP
參加條件
- See Above
支援的儀器
- 86100C DCA J and 86100D DCA X oscilloscopes
相關聯結
如何下載
- 無相關資訊
如何安裝
See Above
授權
- 不需要授權
安裝於: PC / Instrument
作業系統
- Windows 7
- Windows Vista
- Windows XP
參加條件
See Above
支援的儀器
- 86100C, 86100D
相關聯結
如何下載
- 無相關資訊
如何安裝
授權
- 不需要授權
如何下載
- 無相關資訊
如何安裝
授權
- 不需要授權
安裝於: PC / Instrument
作業系統
- Windows 7
- Windows Vista
- Windows XP
參加條件
- See Above
支援的儀器
- 86100C DCA J and 86100D DCA X oscilloscopes
相關聯結
如何下載
- 無相關資訊
如何安裝
授權
- 不需要授權