What are you looking for?
N1010A FlexDCA Sampling Oscilloscope Software
N1010A FlexDCA Sampling Oscilloscope Software provides Oscilloscope, Eye/Mask, Jitter, and TDR measurement capabilities and is used to control compatible Keysight DCA instruments.
The FlexDCA installer includes the latest updates* for:
- FlexDCA software packages: N1010100A R&D, N1010200A MFG, and N1010300A SI
- FlexPLL for phase-locked loop mesurements
- FlexRT for optical measurements on UXR-Series Oscilloscopes
- FlexOTO for optimization of optical measurements using DCA-M Series oscilloscopes
* Requires applicable software licenses with active support
NOTICE: FLEXDCA SUPPORT FOR 86100D TO END SEPTEMBER 2024
FlexDCA A.07.80, planned for release September 2024, will no longer support installation on 86100D mainframes. For continued access to the latest FlexDCA updates, consider trading in your 86100D for an N1000A (trade-in offer). Contact your local Keysight representative to discuss options, www.keysight.com/find/contactus.
See N1010A FlexDCA 86100D Support Notice and FAQ for detailed information.
NOTES ON PREVIOUS VERSIONS
- Compatibility mode is supported in A.06.81.26 and lower. See supported modules table to determine if a module is directly supported in FlexDCA.
- 32-bit and 64-bit installers are available for A.06.03 and lower. A.06.40 and higher support 64-bit operating systems only.
- 86100C connectivity is supported in A.05.80 and lower (86100C must be running firmware revision A.10.83).
- Windows 11 is supported in A.07.40 and above.
- Windows 10 is supported in A.05.00 and above.
- Windows 7 is supported in A.05.00 and above.
- Windows XP is supported in A.04.54 and lower.
リリース | バージョン | 内容 |
---|---|---|
2023-11-07 | A.07.50.258 | Adds Low SNR mode to the TDECQ equalizer, Pulse Fit Signal Processing, Fast Tuning mode for FlexOTO DUT power tuning, support for the M8199B AWG, updated TDR AFR wizard, hardware option CRX for the N1092-CDR, 12 edge jitter measurement improvements, and Extinction Ratio Correction Factors (ERCF). Multiple improvements and fixes for FlexOTO and FlexPLL. |
リリース | バージョン |
---|---|
2023-11-07 | A.07.50.258 |
Version Description |
---|
Adds Low SNR mode to the TDECQ equalizer, Pulse Fit Signal Processing, Fast Tuning mode for FlexOTO DUT power tuning, support for the M8199B AWG, updated TDR AFR wizard, hardware option CRX for the N1092-CDR, 12 edge jitter measurement improvements, and Extinction Ratio Correction Factors (ERCF). Multiple improvements and fixes for FlexOTO and FlexPLL. |
ダウンロード方法
Click the download button and save the installation file to the target machine or to a location available to the target machine.
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 11
- Windows 10
- Windows 7 64-bit
前提知識
- Always install the latest Microsoft Windows updates before installing a new version of software.
- To validate the installer file, check the SHA256 File Checksum: EC922AC98F921434E4DB28657BBFF2A986A0A9E9A74481A3280052A08FBC7463
- For Windows 7 PCs and 86100D instruments, manual installation of the DigiCert Trusted Root G4 Certificate and the Sectigo SHA-2 Root USERTrust RSA Certificate is required.
- .Net requires updated certificates to install. With a LAN connection, this certificate will update automatically during installation.
See FlexDCA Installation Troubleshooting Guide for additional information:
対象測定器
- N1000A, 86100D, N1002A, N109xx, N107xx
ダウンロード方法
Click the download button and save the installation file to the target machine or to a location available to the target machine.
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 11
- Windows 10
- Windows 7 64-bit
前提知識
- Always install the latest Microsoft Windows updates before installing a new version of software.
- To validate the installer file, check the SHA256 File Checksum: 8B383ABDF2A853D9746371715CB3896BCFDA86EF997D3B4923412FB23333C552
- For Windows 7 PCs and 86100D instruments, manual installation of the DigiCert Trusted Root G4 Certificate and the Sectigo SHA-2 Root USERTrust RSA Certificate is required.
- .Net requires updated certificates to install. With a LAN connection, this certificate will update automatically during installation.
See FlexDCA Installation Troubleshooting Guide for additional information:
対象測定器
- N1000A, 86100D, N1002A, N109xx, N107xx
ダウンロード方法
Click the download button and save the installation file to the target machine or to a location available to the target machine.
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 11
- Windows 10
- Windows 7 64-bit
前提知識
- Always install the latest Microsoft Windows updates before installing a new version of software.
- To validate the installer file, check the SHA256 File Checksum: 04545F49606318273278588DC31C8982A896254EC56A29829781EC48E2350C1B
- For Windows 7 PCs and 86100D instruments, manual installation of the DigiCert Trusted Root G4 Certificate and the Sectigo SHA-2 Root USERTrust RSA Certificate is required.
- .Net requires updated certificates to install. With a LAN connection, this certificate will update automatically during installation.
See FlexDCA Installation Troubleshooting Guide for additional information:
対象測定器
- N1000A, 86100D, N1002A, N109xx, N107xx
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
SHA256
8F33E42B0A89E42932280B0F37AAD57907F57258B2BF1309F168A9257628DC78
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10 64-bit
- Windows 7 64-bit
前提知識
- For Windows 7 PCs and
86100D instruments, manual installation of the DigiCert Trusted Root G4
Certificate is required. See ‘TN FlexDCA Installation Troubleshooting Guide’
for additional information.
- Important! Install latest Microsoft Windows updates before installing this revision.
- .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
対象測定器
- N1000A, 86100D, N109xx, N107xx
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
SHA256
06D9C5B3CCCC43D73FD7FBB750742212E24CC5F3DD8BD390E2B6031C129C9CBB
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10 64-bit
- Windows 7 64-bit
前提知識
- For Windows 7 PCs and
86100D instruments, manual installation of the DigiCert Trusted Root G4
Certificate is required. See ‘TN FlexDCA Installation Troubleshooting Guide’
for additional information.
- Important! Install latest Microsoft Windows updates before installing this revision.
- .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
対象測定器
- N1000A, 86100D, N109xx, N107xx
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10 64-bit
- Windows 7 64-bit
前提知識
- For Windows 7 PCs and
86100D instruments, manual installation of the DigiCert Trusted Root G4
Certificate is required. See ‘TN FlexDCA Installation Troubleshooting Guide’
for additional information.
- Important! Install latest Microsoft Windows updates before installing this revision.
- .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
対象測定器
- N1000A, 86100D, N109xx, N107xx
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10 64-bit
- Windows 7 64-bit
前提知識
- For Windows 7 PCs and
86100D instruments, manual installation of the DigiCert Trusted Root G4
Certificate is required. See ‘TN FlexDCA Installation Troubleshooting Guide’
for additional information.
- Important! Install latest Microsoft Windows updates before installing this revision.
- .Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
対象測定器
- N1000A, 86100D, N109xx, N107xx
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10 64-bit
- Windows 7 64-bit
前提知識
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
対象測定器
- N1000A, 86100D, N109xx, N107xx
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10 64-bit
- Windows 7 64-bit
前提知識
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
対象測定器
- N1000A, 86100D, N109xx, N107xx
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10 64-bit
- Windows 7 64-bit
前提知識
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
対象測定器
- N1000A, 86100D, N109xx, N107xx
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10
- Windows 7 64-bit
前提知識
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
対象測定器
- N1000A, 86100D, N109xx, N107xx
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10
- Windows 7 64-bit
前提知識
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
対象測定器
- N1000A 86100D N109xx N107xx
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
-
Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10
- Windows 7 64-bit
前提知識
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
対象測定器
- N1000A 86100D N109xx N107xx
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10
- Windows 7 64-bit
前提知識
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
対象測定器
- N1000A 86100D N109xx N107xx
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10
- Windows 7 64-bit
前提知識
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
対象測定器
- N1000A 86100D N109xx N107xx
ダウンロード方法
Click the download button and save the appropriate upgrade file (32-bit or 64-bit) to a USB flash drive, LAN folder that will be available to the target machine, or directly to the target machine.
インストール方法
- Close all open programs and applications
- Install latest Microsoft Windows updates
- Run the installation package, following all prompts and instructions
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10
- Windows 7 64-bit
- Windows 7 32-bit
- NOTE: FlexDCA versions released July 2019 or later will no longer support 32-bit operating systems
前提知識
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
対象測定器
- N1000A 86100D N1090A N1092A/B/C/D/E N1094A/B N1076A/B N1077A N1078A
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
インストール方法
Close all open programs and applications.
Run the installation package, following all instructions to install your new firmware version.
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10
- Windows 7 64-bit
- Windows 7 32-bit
前提知識
Important! Install latest Microsoft Windows updates before installing this revision.
.Net requires updated certificates or it will not install. Alternatively, the target machine can be connected to a LAN with internet access so the certificate can be downloaded during the installation of FlexDCA.
対象測定器
- 86100D N1090A N1092A/B/C/D/E N1094A/B N1076A/B N1077A N1078A
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
インストール方法
Close all open programs and applications.
Run the installation package, following all instructions to install your new firmware version.
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 10
- Windows 7 64-bit
- Windows 7 32-bit
前提知識
- Information Not Available
対象測定器
- 86100D 86100C N1092A/B/C/D/E N1090A N1076A 7N1078A
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
インストール方法
Close all open programs and applications.
Run the installation package, following all instructions to install your new firmware version.
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 7 32-bit
- Windows 8 64-bit
- Windows 10
前提知識
- Information Not Available
対象測定器
- 86100D N1090A N1092x N1094x N1076A N1077A
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
インストール方法
Close all open programs and applications.
Run the installation package, following all instructions to install your new firmware version.
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 8
- Windows 7
- Windows 10
前提知識
Install latest Microsoft Windows updates before installing this revision.
対象測定器
- 86100D N1090A N1092x N1094x N1076A N1077A
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
インストール方法
Close all open programs and applications.
Run the installation package, following all instructions to install your new firmware version.
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 8
- Windows 7
- Windows 10
前提知識
Install all Windows updates prior to installing this upgrade.
対象測定器
- 86100D, N1090A, N1092x, N1076A, N1077A
ダウンロード方法
Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
インストール方法
Close all open programs and applications.
Run the installation package, following all instructions to install your new firmware version.
ライセンス
- Does Not Require a License
Installs on: PC / Instrument
OS
- Windows 8
- Windows 7
- Windows 10
前提知識
Install all Microsoft Windows updates before installing this firmware.
対象測定器
- 86100D, 86100C, N1090A, N4877A, N1092A/B/D
ダウンロード方法
- Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
インストール方法
- Close all open programs and applications.
- Run the installation package, following all instructions to install your new firmware version.
ライセンス
- Does Not Require a License
Installs on: PC / Instrument
OS
- Windows 8
- Windows 7
前提知識
- Install all Microsoft Windows updates before installing this firmware.
対象測定器
- 86100D 86100C N1090A
ダウンロード方法
- Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
インストール方法
- Close all open applications.
-
Run the installation package, following all instructions to install your new firmware version.
ライセンス
- Does Not Require a License
Installs on: PC / Instrument
OS
- Windows 7 64-bit
- Windows 8 64-bit
- Windows Vista 64-bit
前提知識
- None
対象測定器
- 86100D N1090A
ダウンロード方法
- Click the download button and save the upgrade file to a USB flash drive or LAN folder that will be available to the target machine.
- For best results on the 86100D mainframe, use the rear panel USB ports.
インストール方法
- Close all open applications.
- Run the installation package, following all instructions to install your new firmware version.
ライセンス
- Does Not Require a License
ダウンロード方法
Download the firmware upgrade file to the target PC or to a USB flash drive or LAN folder that will be available to the target PC.
インストール方法
Run installation package on the target PC , following all instructions to install your new firmware version.
ライセンス
- Does Not Require a License
Installs on: PC / Instrument
OS
- Windows 8
- Windows 7
- Windows Vista
前提知識
64-bit Windows OS as noted above
対象測定器
- 86100C, 86100D
ダウンロード方法
Download the firmware upgrade file to the target PC or to a USB flash drive or LAN folder that will be available to the target PC.
インストール方法
Run installation package on the target PC , following all instructions to install your new firmware version.
ライセンス
- Does Not Require a License
ダウンロード方法
Download the firmware uprade file to the target PC or to a USB flash drive or LAN folder that will be available to the target PC.
インストール方法
Run the installation package on the target PC and run the installation package, following all instructions to install your new firmware version.
ライセンス
- Does Not Require a License
説明資料
ダウンロード方法
Copy the firmware uprade file to a USB flash drive or LAN folder that will be available to the target PC.
インストール方法
Copy the upgrade file to the target PC and run the installation package, following all instructions to install your new firmware version.
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 7
- Windows XP SP3
前提知識
86100C or 86100D mainframe running the latest version of firmware.
対象測定器
- 86100C, 86100D
ダウンロード方法
Click the 'Download' button and save or transfer the installation file to target PC.
インストール方法
Run the executable installation file and follow all instructions to install on the target PC
ライセンス
- Does Not Require a License
説明資料
ダウンロード方法
See Above
インストール方法
See Above
ライセンス
- Does Not Require a License
Installs on: PC / Instrument
OS
- Windows 7
- Windows XP SP3
前提知識
- Information Not Available
対象測定器
- N1010A
ダウンロード方法
- Information Not Available
インストール方法
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 7
- Windows XP
前提知識
See Above
対象測定器
- 86100C, 86100D
関連リンク
ダウンロード方法
- Information Not Available
インストール方法
ライセンス
- Does Not Require a License
説明資料
Installs on: PC / Instrument
OS
- Windows 7
- Windows Vista
- Windows XP
前提知識
- See Above
対象測定器
- 86100C DCA J and 86100D DCA X oscilloscopes
関連リンク
ダウンロード方法
- Information Not Available
インストール方法
ライセンス
- Does Not Require a License
Installs on: PC / Instrument
OS
- Windows 7
- Windows Vista
- Windows XP
前提知識
- See Above
対象測定器
- 86100C DCA J and 86100D DCA X oscilloscopes
関連リンク
ダウンロード方法
- Information Not Available
インストール方法
See Above
ライセンス
- Does Not Require a License
Installs on: PC / Instrument
OS
- Windows 7
- Windows Vista
- Windows XP
前提知識
See Above
対象測定器
- 86100C, 86100D
関連リンク
ダウンロード方法
- Information Not Available
インストール方法
ライセンス
- Does Not Require a License
Installs on: PC / Instrument
OS
- Windows 7
- Windows Vista
- Windows XP
前提知識
- Information Not Available
関連リンク
ダウンロード方法
- Information Not Available
インストール方法
ライセンス
- Does Not Require a License
Installs on: PC / Instrument
OS
- Windows 7
- Windows Vista
- Windows XP
前提知識
- See Above
対象測定器
- 86100C DCA J and 86100D DCA X oscilloscopes
関連リンク
ダウンロード方法
- Information Not Available
インストール方法
ライセンス
- Does Not Require a License
Installs on: PC / Instrument
OS
- Windows 7
- Windows Vista
- Windows XP
前提知識
- Information Not Available