这是您想要的页面. 查看搜索结果:

特点

FieldFox 手持分析仪能够通过可现场升级的软件许可证进一步增强功能，更深入地洞察测量和分析结果。 这些功能让您在外场也能获得准确度与台式仪器不相上下的测量结果。

  • 一台仪器既能完成日常维护任务，也能进行深入的故障诊断
  • 综合网络分析仪、频谱分析仪、内置功率计、矢量电压表等仪器的功能，充分发挥性能优势
  • 随同新仪器一起订购或通过升级现有仪器获得
基本型号包含电缆与天线测试仪（CAT）功能。

 

Explore Software Options for the N9913A

Full-Band Spectrum Analyzer

Spectrum Analyzer

Perform high-performance spectrum analysis with four trace options, different detector types, radio standard selection, and flexible limit lines.

Real-Time Spectrum Analyzer

RTSA measurement

Use gap-free, real-time spectrum analysis (RTSA) with 100 MHz of real-time bandwidth to capture small and intermittent signals masked by larger signals.

Y-Factor Noise Figure & Gain Measurements

noise figure measuement

Characterize devices like low noise amplifiers, frequency converters, and receivers with portable, one-button Y-factor noise figure and gain measurements.

In-Phase & Quadrature (I/Q) Analyzer

I/Q Analysis

Demodulate I/Q data and verify final signal chain integration or troublesoot signal quality degradation due to hardware or software issues.

Interference Analyzer and Spectogram

Interference Analyzer

Identify interfering signals quickly and accurately using spectogram or waterfall display. Record traces over time and store them for offline processing.  

Extended Range Transmission Analysis

ERTA measurement

Measure the scalar transmission gain or loss of waveguide systems, mixers, converters, and long cables where the two ends cannot easily meet.

Preamplifier

preamplifier

Increase spectrum analyzer sensitivity and reduce the DANL.

Analog Demodulation

AM/FM demodulation

Demodulate and chracterize AM and FM signals of radio transmitters.

Time Gating

Time gating

Measure the spectrum of a periodic signal during a specified time interval.

Transmission & Reflection

Transmission and Reflection

Use vector network analyzer mode to measure transmission and reflection (S21 and S11) magnitude and phase.

Time-Domain Response Measurements

Time Domain Response

Display reflection or transmission coefficients in the time domain and remove unwanted responses with time-domain gating.

Full Two-Port S-Parameters

2-Port S-Parameters

Enable vector network analyzer mode to measure all four S-parameters (S21, S11, S12, S22) magnitude and phase.

Mix-Mode S-Parameters

S-Parameter Mix Mode

Make balanced, mixed-mode S-parameter reflection measurements (Scc11, Sdd11, Scd11, Sdc11) with network analyzer mode.

Vector Voltmeter (VVM) Measurements

vector voltmeter

Measure the phase shift and elctrical length of a device and view the results on the large display from a distance.

TDR Cable Measurements

Time Domain Response

Identify the location and nature of faults alon cables using time-domain reflectometry measurements.

Frequency Channel Scanner

channel scanner

Verify signal coverage, identify potential interference issues, and optimize network performance with channel power measurements of up to 20 channels at once.

EMF Measurements

EMF measurement

Evaluate total RF exposure levels in any given area. Verify compliance to regulatory and government requirements using a triaxial isotropic antenna.

Over-the-Air 5G TF Measurements

Over-the-air 5G TF measurement

Demodulate and analyze 5GTF cell information transmitted over-the-air from base station downlink multi-path and multi-cell environments.

Over-the-Air LTE FDD Measurements

Over-the-air LTE FDD measurements

Analyze LTE FDD cell information transmitted over-the-air and optimize inter-RAT handovers for overlapping 5G and LTE networks.

USB Power Measurements vs. Frequency

USB power measurements vs frequency

Characterize the scalar transmission response of devices such as mixers and converters using USB power sensor measurements versus frequency.

Built-in Power Meter

power meter

Make accurate, user-definable channel power measurements such as transmitter output power with no additional external hardware.

USB Power Sensor Pulse Measurements

USB pulse measurement

Characterize RF pulses such as those used in radar and electronic warfare systems using a USB peak power sensor.

Utilities

Remote Control Capability

remote control

View and control FieldFox remotely using an iOS device.

Built-in GNSS/GPS Receiver

GPS

Attach geolocation tags to measurements with a built-in GNSS/GPS receiver.

DC Bias Variable Voltage Source

DC bias voltage source

Provide power to amplifiers under test and bias tower mounted amplifiers.

Indoor & Outdoor Mapping

indoor and outdoor mapping

Import indoor and outdoor maps for data collection and plotting to the map.

Learn more about each software option in the Technical Overview.

Download Technical Overview

Free Trials

  • Get 30-day free trial license
  • Enables option on your FieldFox
  • Evaluate full-featured version with no functionality restrictions

Extend the capabilities for your FieldFox 手持式分析仪软件

服务
查看所有服务
支持
查看所有支持

Featured Resources for FieldFox 手持式分析仪软件

Configuration Guides 2023.07.27

FieldFox Handheld Analyzers

FieldFox Handheld Analyzers

This is a configuration guide to help potential customers structure an N99xxA FieldFox to best fit their applications.

2023.07.27

技术概述 2019.02.28

FieldFox Handheld Analyzers 4/6.5/9/14/18/26.5/32/44/50 GHz

FieldFox Handheld Analyzers 4/6.5/9/14/18/26.5/32/44/50 GHz

Now there’s a rugged, dependable handheld designed to deliver precise, lab-grade measurements up to 50 GHz. Learn more about the FieldFox microwave analyzers.

2019.02.28

查看所有资源

查看所有资源

Want help or have questions?

Contact Us