這是我們認為您想查看的頁面. 觀看搜尋結果:

產品特性

頻寬：

  • 頻寬：7 GHz

範圍：

  • 動態範圍：+/- 2.5V
  • 直流偏移範圍：使用探棒偏移時為 +/- 12V
  • 最大電壓：+/- 30V

輸入阻抗：

  • 差動輸入電阻：50 kOhm
  • 差動輸入電容：0.27 至 0.34 pF
  • 單端輸入電阻：25 kOhm
  • 單端輸入電容：0.44 至 0.67 pF

如需對嵌入式設計進行高速差動或單端探量，InfiniiMax 7 GHz 1134B 差動式探棒放大器是與 Infiniium 6 GHz 示波器搭配使用的完美組合。 它具有極低的輸入電容和平坦的頻率響應，且採用獨家電阻探針技術，可為待測物提供超低的負載和出色的信號傳真度。 InfiniiMax 1130B-34B 系列提供多元的探棒頭和配件，可支援眾多真實應用。 這些配件可因應最嚴苛的機械存取要求。

1134B 是 1134A 符合 RoHS 標準的版本。 1134B 的外形、尺寸、功能和價格與 1134A 完全相同。

請瀏覽 InfiniiMax 探棒配件頁面，以查看適用於 InfiniiMax 1130B-34B 的其他探棒頭配件。

了解示波器單端主動式探棒

擴充儀器功能

配件
查看所有配件

1134B InfiniiMax 探棒，7 GHz 的精選資源

Application Notes 2017.11.30

Improving Performance in Active Oscilloscope Probes

Improving Performance in Active Oscilloscope Probes

Keysight’s new InfiniiMax high bandwidth scope probe provides interchangeable probe heads that are optimized for a variety of high-bandwidth uses.

2017.11.30

Application Notes 2017.11.30

Extending the Operating Range of InfiniiMax Probes

Extending the Operating Range of InfiniiMax Probes

Learn how to extend the operating range of Keysight InfiniiMax probes in voltage, temperature, and distance (reach) between probe amplifiers and heads.

2017.11.30

Application Notes 2017.11.30

InfiniiMax Oscilloscope Probes Impact on (ROHS) Lead–Free Compliance

InfiniiMax Oscilloscope Probes Impact on (ROHS) Lead–Free Compliance

Some Keysight InfiniiMax oscilloscope probe heads are intended for soldering to the device under test. Read about the impact to lead-free (ROHS) Compliance.

2017.11.30

Application Notes 2024.01.23

Oscilloscope Probing for High-speed Signals

Oscilloscope Probing for High-speed Signals

The probe is the dominant factor in determining the noise floor and response of your measurement system. Learn more about this and probe loading effects.

2024.01.23

Application Notes 2021.09.12

Demystifying RCRC and RC Probe

Demystifying RCRC and RC Probe

This paper discusses the advantages of RCRC probes over standard RC probes. It covers input impedance characteristics, and how probe input impedance affects measurements.

2021.09.12

Application Notes 2018.06.20

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Keysight InfiniiMax differential probes are DSP corrected to have a flat magnitude and phase response to provide the highest possible accuracy. The bandwidth chosen to correct to is typically around 3dB non-corrected bandwidth. Usually, extending the bandwidth much beyond that point will increase the noise floor, and if pushed even further, can cause unrealistic noise artifacts. This application note presents the techniques used to extend the bandwidth performance of the InfiniiMax 1169A/B and the N5381A/B solder-in head using the PrecisionProbe application on Infiniium realtime oscilloscope.

2018.06.20

Application Notes 2023.03.12

Probe Soldering Guidelines for Keysight InfiniiMax Probes

Probe Soldering Guidelines for Keysight InfiniiMax Probes

There are various ways to connect test instrumentation probes to devices under test (DUTs). One such method is soldering, which provides a reliable connection and minimizes parasitic probing effects by keeping wire lengths and connections as short as possible. Many of Keysight’s high performance oscilloscope probes utilize soldered connections. As probes and devices continue to shrink, using the correct tools and soldering skills becomes even more critical in order to avoid damage and connectivity issues. This guide provides helpful tips, recommended tools, and techniques specific to Keysight probes to help test engineers make the most out of their soldered-in probes and connections.

2023.03.12

Oscilloscope Probes Selection Guide

Oscilloscope Probes Selection Guide

Keysight offers a broad range of voltage, current, and optical probing solutions for InfiniiVision and Infiniium Series oscilloscopes.
查看所有資源

查看所有資源

是德科技客服中心提供您需要的協助

聯絡我們