這是我們認為您想查看的頁面. 觀看搜尋結果:

產品特性

頻寬

  • 4 GHz（-3 dB）
  • Tr = 108.5 psec（10-90%）

輸入範圍

  • 直流衰減比：10:1 或 5:1
  • 輸入電壓範圍：5:1 衰減時為 2.5 Vpp 或 ±1.25 V、10:1 衰減時為 5 Vpp 或 ±2.5 V
  • 輸入共模範圍：5:1 衰減時為 ±7 VDC 至 100 Hz、> 100 Hz 時為 ± 1.25 V、10:1 衰減時為 ± 2.5 V > 100 Hz
  • 偏移範圍：探量單端信號時 ± 16 V

輸入阻抗

  • 直流輸入電阻：R diff = 100 kΩ ± 2%，R se = 50 kΩ ± 2%
  • 當 > 10 kHz 時的輸入電阻：R diff = 1 kΩ，R se = 500 Ω
  • 輸入電容：C diff = 32 fF，C se = 44 fF（使用 ZIF 探棒頭）

連接

  • N2848A InfiniiMax III QuickTip 探棒和 N5445A InfiniiMax III 點測器
  • N5439A InfiniiMax III ZIF 探棒頭
  • N5444A InfiniiMax III 2.92 mm/3.5 mm/SMA 探棒頭
  • N5441A InfiniiMax III 銲接式探棒頭

N2830A 系列 InfiniiMax III+ 探量系統為下一代的 InfiniiMax 探量，大幅提升探棒的量測能力和可用性，能夠量測差動信號的所有成分。內建的 InfiniiMode 技術允許客戶在不調整探針連接的情況下切換差動、單端和共模。

N2830A 系列探棒的 InfiniiMode 提供以下操作模式：

  • A – B（差動）
  • A – 接地（信號單號為 A）
  • B – 接地（信號單號為 B）
  • （A + B）/2 – 接地（共模）

InfiniiMax III+ 可與 InfiniiMax III 探棒一起使用，並支援 InfiniiMax III+ 的全部頻寬。

擴充儀器功能

配件
查看所有配件

N2830A InfiniiMax III+ 系列探棒放大器的精選資源

Data Sheets 2024.02.07

InfiniiMax RCRC Probing System

InfiniiMax RCRC Probing System

The new InfiniiMax 4 series probing system is a groundbreaking solution designed to deliver unparalleled signal fidelity and accuracy with bandwidth capabilities reaching up to 52 GHz, all while maintaining exceptionally low loading. With the InfiniiMax III/III+ probe amplifiers, this advanced InfiniiMax RCRC probe system ensures swift and reliable measurements ranging from 8 GHz to 52 GHz, setting a new standard in probing technology.

2024.02.07

Application Notes 2023.03.12

Probe Soldering Guidelines for Keysight InfiniiMax Probes

Probe Soldering Guidelines for Keysight InfiniiMax Probes

There are various ways to connect test instrumentation probes to devices under test (DUTs). One such method is soldering, which provides a reliable connection and minimizes parasitic probing effects by keeping wire lengths and connections as short as possible. Many of Keysight’s high performance oscilloscope probes utilize soldered connections. As probes and devices continue to shrink, using the correct tools and soldering skills becomes even more critical in order to avoid damage and connectivity issues. This guide provides helpful tips, recommended tools, and techniques specific to Keysight probes to help test engineers make the most out of their soldered-in probes and connections.

2023.03.12

User Manuals 2023.02.09

N2830/1/2A and N7000/1/2/3A InfiniiMax III+ Series Probes User Guide

N2830/1/2A and N7000/1/2/3A InfiniiMax III+ Series Probes User Guide

This guide describes how to set up, configure, and use the InfiniiMax III+ series probes.

2023.02.09

Quick Start Guides 2014.03.31

N2830A Series InfiniiMax III+ Probes Configuration Card

N2830A Series InfiniiMax III+ Probes Configuration Card

This card shows the recommended probe head configurations for the InfiniiMax III+ probing system. It also includes additional information and tips.

2014.03.31

Data Sheets 2024.01.01

Infiniium Oscilloscope Probes and Accessories

Infiniium Oscilloscope Probes and Accessories

To get the most out of your Keysight Infiniium oscilloscope, you need the right probes and accessories for your particular applications. Whether you need the high bandwidth and low loading of an active probe, an easy way to connect to surface mount ICs, or a passive probe to measure high voltages, there’s a wide selection of high-quality probes and accessories for your Infiniium oscilloscope. The Infiniium probes and accessories data sheet provides you the overview of all probes and accessories recommended for Infiniium oscilloscopes.

2024.01.01

Application Notes 2018.06.20

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Keysight InfiniiMax differential probes are DSP corrected to have a flat magnitude and phase response to provide the highest possible accuracy. The bandwidth chosen to correct to is typically around 3dB non-corrected bandwidth. Usually, extending the bandwidth much beyond that point will increase the noise floor, and if pushed even further, can cause unrealistic noise artifacts. This application note presents the techniques used to extend the bandwidth performance of the InfiniiMax 1169A/B and the N5381A/B solder-in head using the PrecisionProbe application on Infiniium realtime oscilloscope.

2018.06.20

User Manuals 2014.04.14

N2830A-Series Differential InfiniiMax III + Probes Handling Guide

N2830A-Series Differential InfiniiMax III + Probes Handling Guide

This guide describes proper handling techniques for the N2830A-Series probes.

2014.04.14

Oscilloscope Probes Selection Guide

Oscilloscope Probes Selection Guide

Keysight offers a broad range of voltage, current, and optical probing solutions for InfiniiVision and Infiniium Series oscilloscopes.
查看所有資源

查看所有資源

是德科技客服中心提供您需要的協助

聯絡我們