| Keysight

Case Studies 2023.05.24

Creating Highly Efficient and Reliable mmWave Power Amplifiers

Analog Devices developed a reference design and simulation model in PathWave System Design for the signal chain involving its RF front-end MxFE family of devices. This reference model is available to ADI's device customers for exploration of their RF front end designs. ADI expects the model to save customers up to 6 months in their development cycles by shifting design exploration left in the workflow.

2023.05.24

Case Studies 2023.05.16

DEKRA Deploys Keysight EV / EVSECharging Test Solutions in Europe’s First CharIN CCS Test System Laboratory

The electric vehicle (EV) market is growing rapidly with the latest European Council confirming the phasing-out of internal combustion engine (ICE) vehicles by 2035. The EV charging infrastructure must expand to support the growth of the sales of EVs. Consumers expect to recharge their EVs just as quickly as refilling their internal combustion engine (ICE) vehicles with gasoline or diesel. This technological change means that the charging process needs to be convenient. This case study shares how DEKRA deploys Keysight EV charging test solutions in Europe’s First CharIN combined charging system (CCS) test system laboratory to accelerate conformance testing and interoperability certification of charging stations.

2023.05.16

Case Studies 2023.04.27

Accelerate Patient Diagnosis and Treatment with Automated Medical Device Testing

An Eggplant Test Automation case study focusing on accelarating Patient Diagnosis with Automated Medical Device Testing.

2023.04.27

Case Studies 2023.04.12

Automate Wi-Fi Regulatory Test for Smart Devices

A leading global manufacturer of consumer products faced this challenge. The company had difficulty passing a series of mandatory adaptivity tests established by the European Telecommunications Standards Institute (ETSI), preventing it from launching its products in European countries. With the Keysight IOT0047A regulatory test system, this company not only passed these complex tests but reduced test time dramatically and improved repeatability.

2023.04.12

Case Studies 2023.03.28

DAQ with Matlab for Medical Science

This case study illustrates how Keysight’s MATLAB Data Acquisition toolbox is used in medical research thanks to a MATLAB adaptor that acts as a plug-in.

2023.03.28

Case Studies 2023.03.27

Nokia Sets Data Speed Record

Nokia Bell Labs and Keysight combined expertise with other research partners created the record-breaking demonstration of 260 GBaud coherent transmission over 100 km. This story tells how collaborative research helps to set the 260 GBaud record, advancing technologies to meet the ever-growing demand of bandwidth.

2023.03.27

Case Studies 2023.03.22

Mexican Mining Giant Gains Full Visibility into OT Infrastructure

By deploying Keysight’s visibility solution, the customer was able to address blind spots and cost management challenges associated with not having enough ports on the existing OT security sensors. The Vision NPB aggregation and replication capabilities significantly reduced the number of sensor ports needed to ingest all mirrored traffic, allowing the customer to save the cost of purchasing more sensors and to get the most out of the existing OT security solution.

2023.03.22

Case Studies 2023.03.06

Predicting Ka-band Transceiver Thermal Margins, Wear, and Lifespan

One use case for EnSilica’s Ka-band (26.5-40 GHz) transceivers is vehicle-mounted low-earth orbit (LEO) satellite terminals, where harsh temperatures can wear parts out faster than expected. Assessing the thermal performance of these transceivers using Keysight PathWave Advanced Design System (ADS), PathWave RFPro, and PathWave ADS Electro-Thermal Simulator is vital in understanding their thermal operating margin and lifespan.

2023.03.06

Case Studies 2023.02.18

Large US Law Firm Augments Network Visibility with Keysight

Large US-based law firm uses Keysight Visibility to eliminate blind spots and optimize IoT security tooling.

2023.02.18

Case Studies 2023.02.08

McGill Univeristy's Photonic Systems Group Overcomes Test Limitations in Optoelectronic Research

McGill University is known for their state of the art optical communications research. Read this case study to learn why McGill researchers selected the Keysight UXR oscilloscope and M8190 Series arbitrary waveform generator for their lab, and how those instruments improved their test accuracy.

2023.02.08

Case Studies 2023.01.19

Optimizing MxFE Front Ends with Complex Gain Control Settings

Analog Devices developed a reference design and simulation model in PathWave System Design for the signal chain involving its RF front-end MxFE family of devices. This reference model is available to ADI's device customers for exploration of their RF front end designs. ADI expects the model to save customers up to 6 months in their development cycles by shifting design exploration left in the workflow.

2023.01.19

Case Studies 2022.12.06

DC-DC Converter Testing

Manufacturer of automotive DC-DC converters slashes test time by 95 percent.

2022.12.06

Case Studies 2022.11.22

90% Increase in USB-C® Cables Testing Throughput

Improves USB-C® Interconnects Compliance Test Time

2022.11.22

Case Studies 2022.11.10

10% Increase in ADAS PCBA Testing Throughput

Automotive electronics manufacturers must be prepared to address new test challenges efficiently and effectively as advanced driver assistance systems (ADAS) technology advances. This case study shows how an automotive electronics manufacturer used the Keysight in-line 4 module ICT and PathWave Manufacturing Analytics Software to cut down on labor-intensive tasks and increase test throughput.

2022.11.10

Case Studies 2022.11.08

Improving Reliability of Semiconductor Devices

Automation of random telegraph noise measurement (RTN) is now possible using the B1500A's waveform generator/fast measurement unit (WGFMU) module and WaferPro Express.

2022.11.08

Case Studies 2022.11.07

Service Provider Yields Improvement by Automating the Validation and Test Cycle

This case study shows how a large Service Provider (SP) took advantage of the years of experience Keysight has gained in automating the validation process for different Network Equipment Manufacturer (NEM) products before deploying into production networks.

2022.11.07

Case Studies 2022.11.02

Accelerate AiP Design Integration

Measuring AiP performance using over-the-air (OTA) test methods makes achieving accurate and repeatable results more challenging than a traditional setup. TMYTEK uses our VXG and UXA to test its AiP module. This case study is to mention how TMYTEK uses our solution to improve its design process.

2022.11.02

Case Studies 2022.11.02

Acceptance Testing Helps Mobile Network Operator Grab Early Leadership in 5G

A major mobile network operator (MNO) chose Keysight to help create device acceptance tests for the launch of its 5G network. After a successful launch, the MNO was the first to reach 1 million 5G mobile subscribers just a few months later.

2022.11.02

Case Studies 2022.11.01

Meeting Increasing Customer Demand Without Budget Consequences

KeysightAccess provides a complete business solution to help a network equipment manufacturer acquire the test solution and service they need now.

2022.11.01

Case Studies 2022.10.31

Wolverines Don’t Usually Run This Fast

"Keysight automotive test solutions improve performance and safety of electric race car” – See how the Michigan Electric Racing team helped improve its race car’s performance and electrical safety using Keysight’s power and battery test solutions.

2022.10.31

Case Studies 2022.10.25

Design Team Increases Efficiency of High-Speed Digital Boards by 100%

IPS found that Keysight’s PathWave Advanced Design System (ADS) contained all the tools and processes it needed to design stable, reliable high-speed digital PCBs.

2022.10.25

Case Studies 2022.10.25

Antenna Module Manufacturer Accelerates 5G mmWave Development by More than 50%

A global antenna module manufacturer uses Keysight's 5G R&D Test Bed and PNA network analyzer to accelerate the development time for its 5G mmWave products based on beamforming technologies.

2022.10.25

Case Studies 2022.10.20

Powering E-Bikes and Battery Energy Storage Systems with Cell-Formation Solution

E-mobility manufacturer saves time and money with new cell formation solution to meet growing orders and stricter test criteria.

2022.10.20

Case Studies 2022.10.05

5G RF Design Startup Delivers Cutting-Edge GaN / GaAs Devices

With demand for GaN and GaAs power amplifiers on the rise, see how one 5G RF design company delivered cutting-edge GaN / GaAs devices on day one.

2022.10.05

Case Studies 2022.10.05

Test Automation Software Accelerates Enterprise Digital Transformation

Automating test functions using Keysight's Eggplant software helped Keysight compress the ERP stabilization period by 80%.

2022.10.05

Case Studies 2022.09.12

Precision Power Level Accuracy Measurements Reduce Risk for Wireless Receiver Manufacturer

Reduce test risk, increase yield, and reduce production costs with power level accuracy measurements at lower measurement uncertainty.

2022.09.12

Case Studies 2022.09.12

Delivering First 5G NR Device Technology for Volume Shipments

While 5G New Radio (NR) has been tested in design labs and deployed in multiple trials around the world, translating the 5G NR specification into commercial products that can be produced in volume is essential to successful 5G deployments at scale. This case study outlines how a 5G device manufacturer accelerated their time to market by several months and reduced test times by 20% in volume manufacturing.

2022.09.12

Case Studies 2022.09.08

Automating Intelligence Helps Antenna Manufacturer Accelerate 5G Development

Automating intelligence enabled this customer to accelerate their release plan by 50 percent, realize profits sooner, and boost business resilience in a highly competitive sector.

2022.09.08

Case Studies 2022.09.08

Automating Intelligence Enables Switch-Maker’s First-to-Market Innovation

By automating intelligence with Keysight, a leading RF switch manufacturer was able to deliver first-to-market innovation ahead of schedule.

2022.09.08

Case Studies 2022.09.07

NTT DOCOMO Gains a Go-to-Market Advantage in 5G with Flexible Channel Sounding

As one of the industry’s leading innovators, NTT DOCOMO is working to deploy its 5G mobile network in time for a major athletic event in the summer of 2020 in Tokyo. To define and optimize a network that fulfills on the promise of 5G—without being overdesigned—NTT DOCOMO needed an accurate, reliable and repeatable way to characterize channel propagation.

2022.09.07

Case Studies 2022.09.06

Automate Intelligence: Jumpstart Operational Agility in Product Development

A leading global automotive component manufacturer reduced their RCA process from six months to five minutes by automating intelligence with Keysight.

2022.09.06

Case Studies 2022.09.06

North American Electric Utility Optimizes Network Visibility with Keysight

2022.09.06

Case Studies 2022.09.05

Cloud Visibility Overcomes Security Limitation of Turnkey Private Cloud

For government entities, network security is mission-critical and subject to strict regulations. That is why this customer, who was deploying a turnkey private cloud platform, was concerned when they realized their provider could not supply the data needed by their threat detection and security analytics solutions. Without the ability to examine packets for potential threats, their new private cloud would present a considerable risk to their network. In search of a solution to provide access to packet data, this government customer turned to Keysight, who worked alongside their security solutions provider to deploy a total cloud visibility solution and eliminate this serious security issue.

2022.09.05

Case Studies 2022.09.04

5G NR Device Manufacturer Doubles Test Capacity with Zero Additional CapEx

This paper shares how one company went to market six months faster with immediate access to test assets with KeysightAccess.

2022.09.04

Case Studies 2022.08.28

University Professor Cuts Lab Setup and Configuration Time by 75 Percent

A tenured professor who had worked in the department for many years, found himself overwhelmed by the task of per-configuring and managing his lab for his EE students. Using Keysight's BenchVue Lab Management Solutions, he sped his process drastically and was able to devote more time time to his students.

2022.08.28

Case Studies 2022.08.28

Semiconductor Maker Implements New Test for Automotive Ethernet

Automotive Ethernet demands rigorous compliance verification and simulation of real-life workloads. Learn how a chipset maker solves these challenges for both the PHY and networking layers.

2022.08.28

Case Studies 2022.08.26

Software Enables New-Age, Flexible Test Solution for Analog and Digital Radios

The case study highlights how PathWave Test Automation plug-ins with Keysight M8920A radio test solution offers the flexibility to Naval lab for testing analog and digital radios.

2022.08.26

Case Studies 2022.08.25

Keysight vTaps and Vision ONE Addresses Changing Government Infrastructure

This federal agency was moving to a fully virtualized data center, which introduced significant monitoring blind spots for east-west traffic. Investing in Keysight's virtualized visibility platform, the agency eliminated blind spots caused by east-west traffic and improved the effectiveness of their monitoring solutions.

2022.08.25

Case Studies 2022.08.25

Shorten Dynamic Frequency Selection Test Time from Days to Hours

Modern requirements in wireless regulatory compliance tests are challenging because they require significant behavior sequences and timing. A leading wireless networking company in the United States specializing in servers, storage, and networking services was having trouble running these tests. This case study highlights how Keysight's IOT0047A regulatory test solution and IoT regulatory compliance software help shorten the DFS test time.

2022.08.25

Case Studies 2022.08.25

Putting the Future in Motion with Automotive Ethernet

Automobile innovating is accelerating at a rapid pace. Built-in infotainment systems—information and entertainment—demand higher speed wireless connections. Advanced electronic safety and convenience systems, built with cameras, radar, and lidar, are driving exponential data growth. All this data is traveling on wired networks inside next-generation vehicles.

2022.08.25

Case Studies 2022.08.23

Power the Future with Biofuel Cells

As IoT goes mainstream, powering devices with biofuel cells which are sustainable and eco-friendly is the way to go. Learn how BeFC accelerated their innovation in biofuel cells to power the future.

2022.08.23

Case Studies 2022.08.22

Youngstown State University Upgrades EE Teaching and Research Labs

This case study reviews how Youngstown State University examined a key factor in new student recruiting, and how they worked with Keysight to ensure their EE program, especially in microelectronics, will be competitive with other regional schools. Combining new equipment, remote access capabilities and industry-ready experience, Youngstown now uses their upgraded labs as a key differentiator in a highly competitive market.

2022.08.22

Case Studies 2022.08.11

Moving from Static Limits to Dynamic Part Average Test (PAT) Limits

The current chip shortage in 2021 is expected to continue to put a strain on semiconductor and IC manufacturers despite them investing more in capital expenditure to increase manufacturing capacity, and which may, in the best case, take a few years to stabilize. There has already been challenges meeting customer demands and deliveries and those delays have caused further problems downstream with at least one car manufacturer temporarily shutting down car production lines due to part shortages. The challenge now is to deliver more components with the existing fully utilized equipment until that new capacity comes online. The successful and fast deployment of PathWave Manufacturing Analytics into production had helped them improve not only their overall equipment efficiencies, with a higher overall throughput, but also maintained the quality of the device test process and further reduce the extremely costly scrap due to false failures and retest. Using the PathWave Manufacturing Analytics solution was a transparent change to the production process that lead to tangibly significant business outcomes, such as cost savings and a lower cost of poor quality.

2022.08.11

Case Studies 2022.08.10

Company Reduces Costs $680K While Improving Security

A leading financial institution based in the Middle East needed to make their inline security capabilities stronger while controlling costs. The solution was to implement the Keysight Security Fabric™ as part of a visibility architecture which allowed the customer to reduce their high availability solution costs by $680,000.

2022.08.10

Case Studies 2022.08.10

Accelerating 400GE Adoption with IxNetwork

As explosive growth drives a technology refresh cycle for network operators in Brazil, WZTECH needed a way to validate 400GE deployments for their ISP customers. Building on a solid relationship established with success in 100GE testing, Keysight worked with WZTECH to develop a cost effective, field upgradable solution to meet both challenging business and technology requirements.

2022.08.10

Case Studies 2022.08.09

Automotive Electronics Manufacturer Revs Up Yield by 5%

Manufacturers now have more data to process, analyze, and interpret, making data analytics software a necessity on the manufacturing floor. One automotive electronics manufacturer quickly discovered the importance of analytics software when faced with unexpected challenges.

2022.08.09

Case Studies 2022.08.09

IIT Delhi Professor Automates Reliability Characterization

Semiconductor technology continues to evolve towards miniaturization and improved performance. The demand for accelerated and accurate testing is becoming critical. The case study highlights how IIT Delhi Professor Dixit has automated reliability characterization of RF-CMOS circuits thereby reducing the manual intervention and decreasing test times.

2022.08.09

Case Studies 2022.08.08

Extending the Life of IoT Devices with Energy–Harvesting Solutions

STMicroelectronics and ESEO chose Keysight ADS and its co-simulation capabilities to design and simulate the rectifying circuit for energy harvesting solutions.

2022.08.08

Case Studies 2022.07.28

Auto Parts Maker Witnessed a 6x Boost in Test Throughput

It is becoming more common to produce high-volume electronic modules with 10 or 20 identical boards on a single panel. The typical testing process, however, is incapable of keeping up with the significant efficiency and throughput gains driven by panel density on SMT lines.

2022.07.28

Case Studies 2022.07.22

Tech Consortium Proves Next-Gen DDoS Defense Tool with CyPerf

When CENGN needed to validate an advanced DDoS mitigation tool, they needed an equally advanced testing tool to push it to its limits. They found a perfect match in Keysight's CyPerf.

2022.07.22

Case Studies 2022.07.21

X1149 Brings Faster Testing for Server Boards

ICT (In-Circuit Testing) is well-known for its ability to provide a quick and comprehensive analysis of the PCBA's components and interconnectivity. However, ICT alone may not be sufficient because high-speed PCBA testing may necessitate a different approach. In this case study, we demonstrate how we assisted one of the world's largest original design manufacturers (ODMs) in improving the test process for their high-speed PCBA products.

2022.07.21

Case Studies 2022.07.18

Leading Pediatric Hospital Addresses Ongoing IT Growth with Keysight Visibility Architecture and Vision X

In order to address ongoing IT growth, a leading US Pediatric hospital redesigns their DC with Keysight Visibility Fabric featuring Vision Edge Packet Brokers and the flagship Vision X.

2022.07.18

Case Studies 2022.07.08

Photonic Systems Group at McGill University Overcomes Test Limitations in Optoelectronic Research

McGill University is known for their state of the art optical communications research. Read this case study to learn why McGill researchers selected the Keysight UXR oscilloscope and M8190 Series arbitrary waveform generator for their lab, and how those instruments improved their test accuracy.

2022.07.08

Case Studies 2022.07.07

Bank Cuts Response Time by 30% With Lossless Visibility

As remote banking from smart phones and other devices increased, this large regional bank struggled to maintain quality of service. See how network visibility reduced response time and support cases.

2022.07.07

Case Studies 2022.07.06

Engineering Service in Public Cloud Gets Security Upgrade

A government agency providing engineering services migrated key applications and services to public cloud infrastructure. As part of the migration, the agency needed to deploy a robust security architecture to protect applications and data from cyberattacks. The Chief of Information Security knew that traffic flowing to, from, and between their virtual servers would need to be monitored closely for intrusions and data breaches.

2022.07.06

Case Studies 2022.07.06

Customer Secures Their Network from Cradle to Grave

Read how the financial institution used Ixia's BreakingPoint solution and visibility architecture together to strengthen their network defenses and create a resilient Security Fabric.

2022.07.06

Case Studies 2022.07.06

Leading Provider of Global Market Data Deploys Real-Time Multicast Gap Detection Monitoring Solution

In this case study, you will read about the impact that the deployment of Keysight's TradeVision had and the unexpected benefits it brought to the data provider.

2022.07.06

Case Studies 2022.07.06

A Logistics Firm Saves Money and Speeds up Mean Time to Repair 80%

See how this customer increased network visibility and reduced MTTR while saving money at the same time.

2022.07.06

Case Studies 2022.07.06

Changing Compliance Mandates Drive an Urgent Need for Inline Security Solutions

Read this case study to see how the customer implemented an inline Security Fabric which saved them $3 Million on inline firewall and IPS deployments.

2022.07.06

Case Studies 2022.07.06

Leading Healthcare Provider Eliminates Millions in HIPAA Compliance Fines with Keysight Security Visibility Fabric

A large regional healthcare provider was able to use Keysight Security Visibility to help provide them the data access and protection needed to avoid $1.5 Million in Annual HIPAA compliance violation fines.

2022.07.06

Case Studies 2022.07.05

Large Retail Pharmacy Uses Keysight Visibility to Help Secure and Optimize Its Network

Keysight Visibility helps optimize tool utililization, and reduced MTTR at large retail pharmacy chain.

2022.07.05

Case Studies 2022.07.05

Cook Children’s Healthcare System Improves Application Experience Using Network Intelligence

Cook Children's Health Care System is a not-for-profit, nationally recognized pediatric health care organization that operates a medical center, physician network, hospital, pediatric surgery center and health plan. Founded in 1918 and based in Fort Worth, Texas, the integrated system has more than 60 primary and specialty care offices throughout North Texas. They needed to improve their network visibility and monitoring practices to solve application performance and SPAN port contention issues. Read this case study to learn how they reduced their mean time to repair for network issues from days to hours and increased monitoring tool efficiency.

2022.07.05

Case Studies 2022.07.05

Company Reduces Costs $680K While Improving Security

This case study illustrates how valuable network visibility is to a security architecture. In this solution, an external bypass and network packet broker (NPB) are combined to strengthen an inline security solution by reducing unnecessary solution costs by $680,000 USD, reducing complexity, and implementing high availability to maintain maximum uptime for the security architecture. See for yourself how you can reduce risk while reducing cost at the same time.

2022.07.05

Case Studies 2022.07.05

New IoT Test and Certification Lab in Spain

With IoT devices in the billions, creating a future that is sustainable and safe demands a more mindful approach to designing and testing these devices. Learn how TECNALIA created their new IoT test and certification lab and increase market share by 15%.

2022.07.05

Case Studies 2022.07.05

Service Provider Secures Network, Blocks Threats, and Boosts Efficiency

Ixia gave this large European service provider the opportunity to run the ThreatARMOR intelligence gateway in passive mode on their production network, to demonstrate exactly what the appliance could do to identify and block suspicious traffic.

2022.07.05

Case Studies 2022.07.05

High Availability Security Upgrade

Multi-national financial services corporation uses Ixia visibility solutions to achieve high availability while upgrading their network security and network monitoring.

2022.07.05

Case Studies 2022.06.22

Simple Digital Multimeter Enhancements Make a Big Difference to Silicon Designers

This success story discusses how simple DMM enhancements make a big difference to Silicon designers.

2022.06.22

Case Studies 2022.04.24

Progressing Chip Technology Manufacturing

Deliver the field-ready cyber pros the world needs now. Prepare students for rapid success with the cyber range based on BreakingPoint, the real-world threat simulation platform.

2022.04.24

Case Studies 2022.04.01

Service Provider Saves $200K and Delivers Regulatory Compliance

A European service provider was looking for a visibility solution to make its applications stronger, improve customer quality of service, and enable the delivery of lawful intercept information for regulatory compliance. Learn how Ixia helped extend the lifespan of their tools and save $200,000 with better network monitoring.

2022.04.01

Case Studies 2022.04.01

Intuitive GUI Helps Yahoo Japan Make Quick Changes to Monitoring Filters and Improve Network Visibility

This case study shows how Yahoo Japan Corporation uses Ixia’s NTO series of network packet brokers to improve their network monitoring and security.

2022.04.01

Case Studies 2022.04.01

Visibility and Voice Biometrics Prevent Fraud

Learn how a government agency turned to Ixia network monitoring tools for more effective network monitoring.

2022.04.01

Case Studies 2022.04.01

Major Bank Meets Compliance, Visibility, and Security Needs through Better Network Monitoring

Read this case study to learn how a network packet broker can optimize your network monitoring tools.

2022.04.01

Case Studies 2022.04.01

Game Company Improves Game Experience with AppStack

Read this case study to learn how a game company utilized Ixia Visibility with AppStack to improve the game experience while providing deep customer usage insights that aided their deployment goals.

2022.04.01

Case Studies 2022.04.01

Media Provider Enhances Cloud Security

This media and entertainment (online gaming) provider faced challenges fighting malware and attacks, in part due to a lack of packet level visibility from their public cloud providers. To address this situation, they successfully deployed a public cloud visibility platform including Ixia CloudLens to access the packet level visibility requirements of their IDS (intrusion detection system) and forensics solutions.

2022.04.01

Case Studies 2022.04.01

Medical Provider Boosts Performance of Physician-Facing Applications

Read this case study to learn how this medical provider upgraded their network and monitoring solutions to ensure edge application availability and performance.

2022.04.01

Case Studies 2022.04.01

Service Provider Strengthens Defense Against Cyber Attacks

Learn how this company deployed Ixia's external iBypass switch in front of their powerful new intrusion prevention system (IPS) to protect network availability during live traffic inspection.

2022.04.01

Case Studies 2022.04.01

Strengthen Security Tools In 30 Minutes

A $4B food product manufacturer runs a complex network with approximately 7,500 networking devices. With Keysight's Vision ONE NPB, they were able to reduce their MTTR by 70%.

2022.04.01

Case Studies 2022.04.01

Full Network Visibility Across Complex Health Care Delivery System

Keysight and CA help hospital group extend network monitoring capabilities while leveraging existing application delivery analysis and performance management tools. See how Vision One and CA's applications are able to accurately and efficiently capture and analyze network traffic.

2022.04.01

Case Studies 2022.04.01

Secure, Efficient, Reliable, and Resilient Military Communications

Read this case study about the National Defense Agency with a critical and sensitive mission. The agency needed a best-in-class application threat intelligence to support data loss prevention and network security.

2022.04.01

Case Studies 2022.03.24

Winning in Wi-Fi 6 with WaveTest 6

Discover how Mitsui Knowledge Industry Co., Ltd. (MKI) was able to accelerate test times for Wi-Fi 6 access points using MU-OFDMA with Keysight’s WaveTest 6 solution.

2022.03.24

Case Studies 2022.02.03

Keysight’s Superior ICT Services Solving EMS Industry Challenges

Learn why this EMS company chose to return to Keysight ICT service and support after more than a year of lower-priced service available from an 3rd party service provider.

2022.02.03

Case Studies 2021.12.10

Time Saved in the Race for Controlling Quantum Dot Qubits

Quantum technology provides the means to achieve breakthroughs in computing. The team at RIKEN’s Quantum Functional System Research Group are focused on technologies to control the quantum state to process information faster with low energy consumption. To make this happen, they focus on establishing one stable qubit then scaling it up to many. In the work of stabilizing a single qubit, noise is a common challenge.

2021.12.10

Case Studies 2021.11.05

Global Automotive Component Manufacturer Uses PMA to Speed Up Root Cause Analysis

With the concurrent outbreak of the pandemic and chip shortage, time to market is extremely crucial in fulfilling the market demand. This accelerates the demand and adoption for all kinds of IOT devices and analytical tools that can help with manufacturing health monitoring and maintaining high FPY (First Pass Yield). Nevertheless, there’s still a lot of opportunities to improve, especially in the functional test process. Root causing functional test failures can be difficult and complex. In this case study we will elaborate on how PMA enabled near real-time RCA of the equipment fixture issues on the production floor that caused a low yield scenario.

2021.11.05

Case Studies 2021.09.10

KIOXIA Accelerates PDK Development by using Keysight Device Modeling Software

KIOXIA accelerates PDK development by using Keysight Device Modeling Software. The modeling efficiency is increased 10X, and the model accuracy is improved in long-term prediction.

2021.09.10

Case Studies 2021.07.27

Deliver a Flawless Mobile User Experience (UX)

An Eggplant Test Automation case study focusing on delivering a flawless mobile customer user experience.

2021.07.27

Case Studies 2021.07.27

Nationwide Adapts for Growth with Eggplant

Learn how leading insurance provider Nationwide adapted for growth with Eggplant DAI

2021.07.27

Case Studies 2021.07.27

Automate Update and Manage Epic Electronic Health Record

An Eggplant Test Automation case study focusing on Automating updating and managing Epic® electronic health records.

2021.07.27

Case Studies 2021.07.27

Scaling to Test for a Million New Patient Cases Every 36 Hours

An Eggplant Test Automation case study focusing on Scaling testing for a million new patient cases every 36 hours

2021.07.27

Case Studies 2021.07.27

Enterprise IT - Analyzing Technology Performance, Integration and Compatibility Before Deployment

An Eggplant Test Automation case study focusing on Analyzing technology performance, integration and compatibility before deployment.

2021.07.27

Case Studies 2021.07.27

Automate the Entire Test Process

An Eggplant Test Automation case study focusing on predicting the quantified customer impact of new product versions prior to release

2021.07.27

Case Studies 2021.07.27

Jet2 on Its Way to 100% Test Automation

Learn how Jet2 is working toward 100% test automation with Eggplant Digital Automation Intelligence

2021.07.27

Case Studies 2021.07.27

COOK Increases Conversions by 7% Thanks to Faster Load Time

Learn how COOK increased conversions by 7% by driving faster load times with Eggplant Performance and Load testing solutions.

2021.07.27

Case Studies 2021.07.27

Freshfields Boosts IT Productivity with Eggplant Functional

Learn how Freshfields boosted productivity with Eggplant DAI

2021.07.27

Case Studies 2021.07.27

Auto Trader Delivers Unrivaled, Marketplace Customer Experience

Learn how the Automotive marketplace leader Autotrader.com uses Eggplant test automation to run 19 million tests a year.

2021.07.27

Case Studies 2021.07.27

Testing ‘Made to Order’ Digital Buyers Journey Across Platforms

An Eggplant Test Automation case study focusing on digital buyers journeys across platforms

2021.07.27

Case Studies 2021.07.27

British Telecom (BT) Drives Development Transformation With Eggplant

Learn how British Telecom enabled digital transformation with Eggplant Digital Automation Intelligence.

2021.07.27

Case Studies 2021.07.27

Reduce Test Cycles by 75%

An Eggplant Test Automation case study focusing on reducing test cycles by 75% with AI-powered testing.

2021.07.27

Case Studies 2021.07.27

Automation Enables Earlier Identification of Defects

Learn how Albertsons, a supermarket retail market leader enables earlier identification of defects

2021.07.27

Case Studies 2021.07.27

Optimize Web Performance with Health Check

An Eggplant Test Automation case study focusing on optimizing web performance with Health Check (GHD)

2021.07.27

Case Studies 2021.07.27

Improve the Customer Experience with Cross-device iOS and Android Testing

An Eggplant Test Automation case study focusing on improving cross-device customer experience with iOS® and Android® testing

2021.07.27

Case Studies 2021.07.27

Delivering Excellence in Healthcare

An Eggplant Test Automation case study focusing on delivering excellence in Healthcare

2021.07.27

Case Studies 2021.07.27

Ensure the Customer has a Delightful Experience

An Eggplant Test Automation case study focusing on ensuring premium Customer Experiences

2021.07.27

Case Studies 2021.07.27

User-Centric Performance and Load Testing Saves Digital Campaign

An Eggplant Test Automation case study focusing on user centric performance and load testing.

2021.07.27

Case Studies 2021.07.27

Improve Testing Quality and Increase R&D Efficiency

An Eggplant Test Automation case study focusing on improving testing quality to increase R&D efficiency

2021.07.27

Case Studies 2021.07.27

Meredith Corp. Automates to Cut Test Time While Reducing Effort with Eggplant Functional

Learn how Meredith Corporation leverages Eggplant DAI to cust test time and effort

2021.07.27

Case Studies 2021.07.27

Ease the Workload of Developing Scripts – Reduce Workflows by 85%

Learn how you can reduce the workload of developing test scripts by 85% with Eggplant DAI.

2021.07.27

Case Studies 2021.07.27

One Test for Multiple Salesforce Environments

An Eggplant Test Automation case study focusing on leveraging One Test for Multiple Salesforce® environments

2021.07.27

Case Studies 2021.07.01

Accelerate the Development of Advanced Wearable Devices

A world-leading multinational semiconductor company chose Keysight CX3300 Series Device Current Waveform Analyzer to accelerate the development of advanced wearable devices with high performance, high reliability, and long-life batteries.

2021.07.01

Case Studies 2021.04.22

Leading University Maintains Application Performance and Defends Against Hackers

One of the world's leading universities improves their security posture and resolves application performance issues after deploying Keysight visibility fabric featuring Vision X network packet broker.

2021.04.22

Case Studies 2021.04.22

Driving Innovation Shortens Design Cycle by 65% for First-to-Market MEMS RF Switch

Menlo Micro’s MEMS RF Switch uses a novel MEMS cantilever switch built with proprietary technology. Learn how they used Keysight PathWave ADS, RFPro and VNA to significantly reduce their design cycle and demonstrate performance.

2021.04.22

Case Studies 2021.03.22

Reducing the Complexities Associated with Multiport Component Characterization

The case study from one of the space customers highlights how PathWave test automation software with modular network analyzer offers a compact, innovative solution for multiport component characterization.

2021.03.22

Case Studies 2021.02.04

Top Research Lab Solves Measurement Challenge in Hours Despite Tight Security

A top research lab made their required measurement the same day and saved potentially $500,000 in lost productivity with committed access to technical experts.

2021.02.04

Case Studies 2021.02.03

Fast Technical Support Helps Automation Company Return to Testing in an Hour

A test engineer at a leading automation company needed to get past a technical issue and make measurements immediately. With committed technical response, he returned to testing within the hour.

2021.02.03

Case Studies 2020.12.22

Virtual Insights with CloudLens

Proximus, the largest ISP in Belgium, faced challenges with visibility into east-west traffic in an increasingly virtualized/NFV environment. Learn how they leveraged CloudLens, Keysight's virtual packet broker, to maintain single pane of glass visibility into even these challenging virtualized environments.

2020.12.22

Case Studies 2020.12.14

Fast-Start Engineering Training with Keysight U3800 Series IoT Applied Courseware

Pohang University of Science and Technology (POSTECH) faced pressure to offer comprehensive, timely training on new and emerging technology trends and concepts such as IoT, artificial intelligence (AI), and big data to its engineering students. Keysight’s U3800 Series IoT Applied Courseware enabled POSTECH to incorporate the new training into its existing curriculum in just one month.

2020.12.14

Case Studies 2020.12.08

Keysight’s BreakingPoint Equips US Army National Guard's Cyber Shield 2020 Cyber Training For Defending Nation's Information Infrastructure

The US Army National Guard’s largest yearly event is called ‘Cyber Shield’. More than 800 National Guard soldiers and airmen from more than 40 states signed in for the virtual training to sharpen their skills as network defenders. Keysight’s BreakingPoint traffic generators were used in the exercise to provide realistic and random background traffic generation meant to obfuscate cyberattacks.

2020.12.08

Case Studies 2020.12.01

Waseda University Combats Hardware Trojans by Monitoring Abnormalities in Current Waveforms

Hardware Trojans are a significant concern to the overall security of any electronic system. Trojans are a malicious modification of circuitry designed to alter the intended behavior of the system. It can either change the functionality of the target device, downgrade its performance, leak sensitive information, and physically destroy or alter a device’s configuration. See how Professor Togawa from Waseda University in Tokyo combats hardware trojans by monitoring abnormalities in current waveforms.

2020.12.01

Case Studies 2020.11.16

University of Houston Enhances eLearning with Real-World Labs

Discover how the University of Houston used Keysight solutions to help get their Remote Engineering Labs online during the pandemic. Using a combination of hardware and software, Professors are still able to give their students industry-ready engineering skills on real equipment with this unique setup.

2020.11.16

Case Studies 2020.11.10

Altum RF Gets Its Prototype Right the First Time, Shortens Design Process by 30%

Read how PathWave ADS helps to get first-time-right prototype on a challenging GaN amplifier design. Using one common tool for modeling, design and layout with integrated features, like electromagnetic simulations and design rule checking, shortens the design process dramatically.

2020.11.10

Case Studies 2020.09.10

Personalized Support Helps 5G Device Team Master New Tests in Hours

A leading 5G application development team reduced learning-related delays by > 2 days and avoided $200,000 in lost productivity with committed access to technical experts.

2020.09.10

Case Studies 2020.08.17

Monitoring and Security of Distributed Networks

A European financial institution faced with challenges around compliance, tool utilization and a lack of centralized network visibility was able to address these concerns by deploying a centrally managed fleet of network packet brokers and fiber taps.

2020.08.17

Case Studies 2020.08.10

SLA Verification of WAN Links

A large European bank was deploying a new global WAN across multiple sites in a variety of countries across many different service provider networks. They needed to make sure that not only were their service providers hitting target SLAs, but also that their internal customers were having a good user experience with challenging applications like video and voice. Learn how Hawkeye helped them achieve their goals.

2020.08.10

Case Studies 2020.07.29

Federal Agency Fortifies Its Network Against Cyberattacks

US federal agency fortifies its network with Vision ONE NPBs, Flex Taps and AppStack.

2020.07.29

Case Studies 2020.07.21

Global Biotech IT Group Ensures Telecommuter Productivity

This company relied on VPN-gateway vendor data sheets to size their new capacity provisioning, however their confidence on their plan was shaken as some of the remote users experienced inconsistent VPN quality of experience. Keysight's SSL VPN Assessment Service testing revealed trouble spots and actionable steps to improve capacity and save costs.

2020.07.21

Case Studies 2020.05.30

BYD Plans For Growth With Faster Automotive Ethernet Testing

BYD, one of the largest automobile manufacturers in China, needed to upgrade to Ethernet for the communication technology in their car network. This modernization shift would connect essential components like the digital instruments, driving data recorder, the panoramic ECU, and the AVB switch allowing faster testing when new capabilities are added. The customer was using an older, but well known, controller area network (CAN) for their system bus. The move to Automotive Ethernet provided higher-quality, lower latency, time synchronization of audio and video in Ethernet standard format to transmit realtime audio and video streams. The upgrade resulted in a reduction of test time by 50% with a Layer 1-7 end-to-end solution.

2020.05.30

Case Studies 2020.05.29

Ensure Wireless Deployment Quality

Conduct wireless network assessments with Hawkeye by deploying wireless-enabled endpoints in different locations on campuses; or between different sites with software endpoints deployed on Android, iOS, MS Windows, or Linux devices.

2020.05.29

Case Studies 2020.05.29

High Traffic and Need for Security and Visibility Spur 100GE Redesign

The University of Texas at Austin must monitor and manage traffic to guard against increasing cyber threats. Ixia provided a solution that will save the university 20–30% on IDS capacity and improve end-to-end network visibility and security.

2020.05.29

Case Studies 2020.05.29

De-Risk your Migration to Data Center or Cloud Hosting

Using the Ixia Hawkeye solution, you can ensure the new hosting location’s reachability and quality of access from all your remote sites and validate that the network transport will offer the same or better quality for your end-users.

2020.05.29

Case Studies 2020.05.28

Ixia and Alcatel-Lucent Validate IEEE1588v2 Performance for Mobile Backhaul

Ixia and Alcatel-Lucent have engaged in rigorous test exercises to validate the performance and robustness of 1588v2 boundary and transparent clock implementations under traffic load, network failover, and scaled mobile backhaul network conditions.

2020.05.28

Case Studies 2020.05.28

Validating Automotive Ethernet Conformance and Performance

Using Ixia’s IxNetwork and IxANVL products, customers like the BMW Group are successful in validating their automotive Ethernet toolchain, getting visibility into the performance and robustness of the switches integrated into ECUs. Read about how Ixia’s L2-3 test solutions helped the BMW Group ensure delivery of the premium-quality vehicle communications that their car owners expect from the BMW brand.

2020.05.28

Case Studies 2020.05.28

Keysight Streamlines SD-WAN Adoption with Hawkeye Monitoring from Ixia

Software-defined wide area networks, or “SD-WANs,” can reduce telecom costs, lessen the burden on operations teams, and improve application performance — if deployments go according to plan. Several challenges came into play when test and measurement market leader Keysight Technologies embarked on a global initiative to replace leased lines with broadband service from three global Internet Service Providers (ISPs). Read the case study to learn how Keysight used the Hawkeye monitoring solution from Ixia to overcome initial and ongoing SD-WAN challenges including: - Qualifying ISP circuits on a global basis - Ensuring application quality before and after migration - Managing new vendor relationships and SLAs - Proactively monitoring voice and video quality Learn more about SD-WAN adoption and why Keysight’s Senior IT Systems Architect Joe Giegel says, “Other monitoring solutions that are deployed centrally can monitor what’s happening at other locations, but they don’t give us the same insight into the actual user experience with applications.”

2020.05.28

Case Studies 2020.05.27

Keysight Optimizes Massive Network Security Infrastructure Upgrade

Keysight’s infrastructure upgrade was a massive and costly endeavor, so the IT team was alarmed when, midway through a worldwide embedded data center firewall deployment, they ran into unexpected issues with the vendor of choice. They used BreakingPoint to figure out why the firewall wasn’t operating as promised and decided to check the performance of the second-choice firewall concurrently. This resulted in a proper bake-off where the two firewall vendors were placed side by side and tested with traffic patterns that closely simulated Keysight’s production traffic flow. This case study describes three days of testing that resulted in an unexpected next-generation firewall (NGFW) purchase decision.

2020.05.27

Case Studies 2020.05.26

Boosting Singapore's Cyber Security Skills

Organizations around the world may be heading toward a cyber security skills crisis with over 50% of security managers reporting a problematic shortage. Singapore is no exception with its Cyber Security Agency projecting a 34% increase in demand for cyber security professionals from 2018 to 2021. We applied our portfolio of technology and expertise to offer a hands-on approach to stay current, upskilled, and updated on the latest tools and technologies: the first Ixia Cyber Combat competition in Singapore.

2020.05.26

Case Studies 2020.05.26

Network Emulation: Remote Storage and Disaster Recovery Performance Validation

Open the document referenced here to understand how Ixia's Network Emulator solved a large US auto insurance company's remote storage array test challenges.

2020.05.26

Case Studies 2020.05.26

Bank Reduces Security Threats by Using SSL Decryption

Financial institutions like banks are high profile targets for security attacks. Network security is mission-critical as any breach can be a public relations nightmare. To reduce the risk of security threats entering the customer’s network, one of Ixia's customers chose to deploy inline Secure Sockets Layer (SSL) and Transport Layer Security (TLS) decryption so they could inspect incoming traffic for various types of malware.

2020.05.26

Case Studies 2020.05.26

Analyzing Virtual Healthcare Data at Full Network Performance

This large health insurance provider uses server virtualization to achieve scale and efficiency. They needed a visibility solution to secure network traffic between virtual machines while filtering out personal data to maintain compliance. Read how Ixia helped them find a solution that saved them 11 months and $300k.

2020.05.26

Case Studies 2020.05.25

Manufacturer Chooses Bypass for Deployment of Next Gen Firewall

Standalone bypass supports fail-safe operation of Cisco Security Appliance.

2020.05.25

Case Studies 2020.05.25

Service Provider Maximizes Visibility in Mobile Networks

This mobile service provider was introducing new services on the network to grow subscriber base. A key challenge was monitoring performance to ensure delivery in accordance with the company's goals for service assurance and quality of experience. Another challenge was to find an improved solution for correlating session data, which provides a complete picture of the subscriber's activity across the radio access and core networks. As the network had grown, the existing solution--performed by monitoring probes--was not able to keep up with the traffic. The network team decided to conduct a proof of concept with several vendors' solutions. Ixia's solution complemented the monitoring architecture and provided the data needed to ensure service assurance and big data analysis.

2020.05.25

Case Studies 2020.05.21

Samtec Reduces R&D Lab Test Time from Four Hours to Five Minutes

Learn how Keysight helped Samtec reduce instrument setup and test time of their next-gen 112 Gbps PAM4 interconnect solutions from four hours to five minutes.

2020.05.21

Case Studies 2020.05.11

First-to-Market Radio-Wave Breast Imaging System Achieved with Network Analyzer

Patients can, from a young age, frequently undergo breast imaging technique based on radio-wave technology. This method offers new diagnostic information in dense tissue while requiring no breast compression or ionizing radiation exposure to the patient. Recognizing the potential impact of such a technology on breast cancer detection and mortality rates, Micrima’s founders decided to develop a radio-wave breast-imaging system using Keysight solutions.

2020.05.11

Case Studies 2020.04.16

The University of Leeds Showcases Two Engineering Research Labs

See how the University of Leeds advances research in high-frequency and terahertz electronics, and ensures graduating students are industry ready.

2020.04.16

Case Studies 2020.04.16

Northeastern University Paves the Way for Novel Safety Mechanisms for Counterterrorism and Health Screening

See how Northeastern University advances research in real-time imaging for security threats and health screening with Keysight network analyzers

2020.04.16

Case Studies 2020.04.14

Box Hill Institute’s Cyber Range Lab Arms Students with Industry-Ready Security Skills

Keysight’s BreakingPoint solution is core to Box Hill Institute’s state-of-the-art cyber range lab, providing tools and simulation environments to arm students with industry-ready security skills.

2020.04.14

Case Studies 2020.03.27

Semiconductor ATE Vendor Prepares for 5G

A supplier of semiconductor automated test equipment integrated a Keysight vector transceiver into its new system design to give it a roadmap to 5G.

2020.03.27

Case Studies 2020.03.10

Simulation Drives mmWave Design Flow

Nokia Bell Labs Leverages End-to-End Keysight Ecosystem to Develop W-Band Phased-Array System with First-Pass Success

2020.03.10

Case Studies 2020.03.04

University of Notre Dame Strikes a Balance Between Research and Teaching

University of Notre Dame’s EE Department has well-equipped classrooms to teach future engineers and labs that pave the way for future breakthroughs. See how Keysight research/teaching solutions helped.

2020.03.04

Case Studies 2020.02.27

BreakingPoint Keeps Louisiana National Guard a Step Ahead of Cyberattacks

The Louisiana (LA) National Guard's cyber range training and other innovative programs feature Ixia’s BreakingPoint Security Testing and PerfectStorm hardware.

2020.02.27

Case Studies 2020.02.17

Yamaha Fine Technologies Achieves 100% High-Frequency PCB Characterization

Using Keysight's modular M980xA PXI Vector Network Analyzer, Yamaha Fine Technologies developed the industry's first solution for fully automated high-frequency PCB characterization.

2020.02.17

Case Studies 2020.01.29

Automotive ECU Designer Reduces Power Consumption by 10%

An automotive chipmaker solved large peak current issues, reducing power consumption and heat generation while ensuring reliability of its products for advanced driver assistance systems.

2020.01.29

Case Studies 2020.01.24

State & Local Government Case Study

This case study of a state & local government is based on an August 2016 survey of Ixia visibility solutions customers by TechValidate, a 3rd-party research service.

2020.01.24

Case Studies 2020.01.24

State and Local Government Agency Case Study

This case study of a state and local government is based on an August 2016 survey of Ixia visibility solutions customers by TechValidate, a 3rd-party research service.

2020.01.24

Case Studies 2020.01.24

Federal Government Case Study

Read how a government organization reduced the traffic load on their monitoring or security tools by almost 60% with Ixia’s visibility solutions

2020.01.24

Case Studies 2020.01.06

PCBA Manufacturer Shifts Gears for Autonomous Driving with Keysight ICT

Leading printed circuit board assembly manufacturer tests 15 million automotive boards with almost no downtime, exceeding its test target.

2020.01.06

Case Studies 2019.12.12

Chord Signaling for High-Speed Chip-to-Chip Applications

Chord signaling technology increases data throughput, while reducing power in next-generation high-speed links

2019.12.12

Case Studies 2019.11.03

GISTDA Reduces CubeSat Cost and Measurement Time

See how Thailand’s space agency overcame challenges in its CubeSat launch program by setting up an RF satellite lab, leveraging a FieldFox Handheld Spectrum Analyzer.

2019.11.03

Case Studies 2019.10.31

Increase Throughput with i3070 Advanced Throughput Multiplier

Learn how Keysight i3070 Advanced Throughput Multiplier helped an EMS company shorten test cycle time by 44% and increased production throughput by 1.8x.

2019.10.31

Case Studies 2019.10.15

Implantable Medical Device Customer

Learn how Keysight helped a customer’s design team (an implantable medical device manufacturer) with a recommended solution for battery drain analysis.

2019.10.15

Case Studies 2019.10.13

Turn Your Keysight Handheld Meter into a Data Logger

Case study on how to turn Keysight Handheld Meter with U1177A IR-to-Bluetooth® adapter with an Android Phone or tablet PC into a Data Logger

2019.10.13

Case Studies 2019.10.07

Keysight Helps ASE Reduce Antenna-in-Package Test Time by 20%

Learn how Keysight's PNA Vector Network Analyzer reduced Advanced Semiconductor Engineering, Inc. test times for its high frequency antenna-in-package designs.

2019.10.07

Case Studies 2019.09.30

SECO Reduces DDR4 Board Failures to Zero

See how Keysight’s PathWave ADS helped SECO reduce board failures by 100%, decrease design optimization time by 35%, and accelerate design setup by 5X.

2019.09.30

Case Studies 2019.09.23

Mini-Circuits Decreases Manufacturing Time with Keysight’s PXI VNA

Learn how Keysight's PXI Vector Network Analyzer reduced Mini Circuit's manufacturing test time of their 10-port components by 80%.

2019.09.23

Case Studies 2019.09.19

Enhancing Automotive Manufacturing Agility to Keep Pace

Demand for advanced automotive systems is driving change in electronic design. Keysight helped a major PCBA manufacturer get ready for their automotive future.

2019.09.19

Case Studies 2019.09.06

Analog Devices Leverages Precise Current Profiling for Optimized IoT Devices

Analog Devices, Inc. (ADI), a global leader in analog and mixed signal devices used Keysight Technologies’ CX3300A Automatic Current Profiler to analyze its current profiles in a fraction of the time and optimize both the design and reliability of its IoT solutions.

2019.09.06

Case Studies 2019.09.06

Accelerate AI Chip Post-Silicon Validation Test

See how Keysight helped Enflame Tech accelerate the post validation testing of their SoC and improve its engineering efficiency by 20%. Learn more!

2019.09.06

Case Studies 2019.09.06

50% Improvement in Medical Device Evaluation and Validation

Learn how an R&D team at a large medical electronics company used Keysight’s CX3300 Series Device Current Waveform Analyzer to speed device evaluation.

2019.09.06

Case Studies 2019.08.13

Building 5G Fronthaul Networks for IoT

Efficient 5G fronthaul networks require optimized, high-throughput, low-latency compression techniques. Learn how NICT accelerated its research efforts.

2019.08.13

Case Studies 2019.08.04

New PXI VNA Speeds Multiport Antenna Development

Learn how a defense contractor accelerated development of a multiport antenna, using a multiport PXI VNA without relying on switches.

2019.08.04

Case Studies 2019.07.30

Winning in 5G with Rapid Characterization of Antenna Designs

A U.S. manufacturer of components used Keysight's 5G waveform generation and analysis testbed to develop a 5G antenna with 1 GHz bandwith at mmWave frequencies.

2019.07.30

Case Studies 2019.07.16

High-Speed Interface Testing Made Simple with a Modern DMM

Learn how one computing company solved its testing challenges in validating high-speed interfaces, monitoring voltage, and accessing data fast with a modern DMM.

2019.07.16

Case Studies 2019.07.09

IIT Kanpur Develops ASM-HEMT Model for GaN Transistors Using Parametric and Device Characterization

IIT Kanpur used Keysight tools to develop the industry's first ASM-HEMT Model for GaN Transistors. Learn more!

2019.07.09

Case Studies 2019.07.07

Car Manufacturer Cuts Labor Resources by 75%; Creates Blueprint for High-Performance Battery Cell

A car maker used Keysight's cell and battery test systems, coupled with a powerful software platform to automate processes, resulting in significant reduction in labor while ensuring product quality.

2019.07.07

Case Studies 2019.06.19

Engineering Education Transformed with Keysight Labs

5G and IoT are disrupting the status quo. Demand for “industry-ready” graduates has never been more critical. See how one university embraces this challenge.

2019.06.19

Case Studies 2019.06.18

Automaker Gets a 360 View of Radar Design and Test Validation with 50% Less Manpower

A car maker saved 50% manpower by automating their tracking and fine-tuning systems for autonomous driving radio frequency (RF) tests with the Keysight PathWave PathWave Lab Operations Software.

2019.06.18

Case Studies 2019.06.17

PSG College of Technology Better Prepares Next-Generation Engineers

PSG College of Technology has recognized the lack of employable engineering degreed graduates. See how PSG and Keysight are collaborating to bridge the gap.

2019.06.17

Case Studies 2019.06.03

Reducing Time to Market with PathWave Manufacturing Analytics

See how Keysight’s PathWave Manufacturing Analytics helped reduce engineering time, enabling one EMS manufacturer to reduce time to market by 6 months.

2019.06.03

Case Studies 2019.06.03

Cloud Provider Improves Security and Visibility Without Overtaxing Tools

See how this global cloud provider relied on xBalancer to prevent overburdening of network monitoring tools, while improving network security and visibility.

2019.06.03

Case Studies 2019.05.26

Innovation in the Alps – Avalanche Forecasting

See how Keysight’s FieldFox Handheld RF and Microwave Analyzer is being used in a novel way to assist with avalanche forecasting.

2019.05.26

Case Studies 2019.05.21

Automotive Electronics Manufacturer Quadruples Throughput

Using the Keysight i3070 4-Module In-Circuit Test System, one automotive electronics manufacturer increased test throughput more than 50%. Learn more!

2019.05.21

Case Studies 2019.05.13

Water Meter Manufacturer Extends Battery Life over 10 Years

One water meter manufacturer shaved two months off their development time and extended battery life to over 10 years with the X8712A IoT battery life optimization solution.

2019.05.13

Case Studies 2019.05.12

Ixia & CA Provide Full Network and Application Visibility for Healthcare Provider

Ixia helps hospital group extend network monitoring capabilities while leveraging existing application delivery analysis and performance management tools

2019.05.12

Case Studies 2019.05.12

Entertainment Arena Validates New Cutting-Edge Wi-Fi Services

Read this case study to see how a sports arena validated their Wi-Fi coverage plan and network performance to find two pre-deployment design defects and save themselves hundreds of man hours to locate those defects. In the end, this validation process helped make the new service a resounding success for the arena.

2019.05.12

Case Studies 2019.04.08

Component Manufacturer Uses Calibration to Reduce Test Risk

Detecting changes in test system measurement uncertainty reduces risk and saves time. Learn how one company used Keysight calibration to lower cost.

2019.04.08

Case Studies 2019.04.08

Improve the Accuracy of Power Level Measurements for Manufacturers

An industry-leading wireless receiver manufacturer improves the accuracy of power level measurements, reduces false pass conditions, and lowers costs.

2019.04.08

Case Studies 2019.03.31

Improve Operational Equipment Effectiveness by 40 Percent

Learn how a smart eMeter manufacturer improved its overall equipment effectiveness (OEE) by 40% by using Keysight’s PathWave Analytics software.

2019.03.31

Case Studies 2019.03.19

Probe Heatmap Tool Helps EMS Company Pinpoint a Costly Issue

This case study demonstrates the success of PathWave Manufacturing Analytics helping EMS company pinpoint and resolve a costly low first pass yield issue.

2019.03.19

Case Studies 2019.03.17

GaN Power Devices: Design Environment Benefits

Fast switching speeds at high frequencies and low power loss are some of GaN power device benefits. See how Panasonic and Keysight are collaborating.

2019.03.17

Case Studies 2019.03.13

Ericsson and Freiburg U. Design High Q Power Harvesting Circuit Using ADS

ADS HB was used to explore the design space around the innovative impedance transformation using a high Q quartz crystal resonator to transform the low voltage from the low impedance antenna.

2019.03.13

Case Studies 2019.03.13

Create an Impedance Matching Method for Wireless Battery Charging

Learn how NCKU created an impedance matching method to perform EM and circuit co-simulation for wireless battery charging using Keysight ADS.

2019.03.13

Case Studies 2019.03.04

New Visibility Platform Enables Security and Control in the Cloud

This provider of IT services successfully incorporated public cloud infrastructure into their IT environment, while maintaining the robust security monitoring they had established in their data center.

2019.03.04

Case Studies 2019.02.18

Resolving Evaluation and Validation Testing Challenges in Mobile Devices

Learn to resolve evaluation and validation testing challenges in mobile devices using Keysight’s CX 3300 Device Current Waveform Analyzer. Learn more!

2019.02.18

Case Studies 2019.01.13

Redefining Wireless Transceivers in 5G Connectivity

See how 5G simulation software and measurement tools from Keysight help Eridan MIRACLE SM3 delivered a 14-bits/symbol, 16K QAM signal with a SNR of more than 40 dB.

2019.01.13

Case Studies 2019.01.02

5G Manufacturer Reduces Test Time by 20X

Learn how a 5G transceiver manufacturer transformed their 4G test equipment set-up to accommodate 5G designs using Keysight PathWave to cut test time by 20X.

2019.01.02

Case Studies 2018.12.25

Portable RADAR Testing Saves Time on the Assembly Line

Automotive radar part of advanced driver-assistance systems (ADAS) that help save lives. See how ADAS-connected radar modules can be validated with FieldFox.

2018.12.25

Case Studies 2018.12.13

Automotive Ethernet Compliance Solution

Learn how one car maker achieved 100% test coverage for physical layer Rx test, meeting IEEE 802.3bw-2015 standards with Keysight's automotive Ethernet solution.

2018.12.13

Case Studies 2018.12.12

Successful Deployment of eCall Live Crash Test

Car maker successfully emulates OTA environments in live crash test for their eCall in-vehicle systems using Keysight eCall/ERA-GLONASS conformance test solution.

2018.12.12

Case Studies 2018.12.10

Coherent Optical Component Test Enables 1.2 Terabit Applications

Using Keysight’s state-of-the-art test equipment, NeoPhotonics successfully validated the performance of its 64 GBaud components, including its new 400ZR COSA, almost one year before the availability of DSP silicon for the transceivers. Without Keysight equipment, NeoPhotonics had no way of testing and assessing the performance of their components.

2018.12.10

Case Studies 2018.12.09

Ultra-broadband Wireless Communications at True Terahertz

Keysight’s test equipment has advanced the research at the University at Buffalo to help achieve the first successful wireless communication at 1.025 terahertz!

2018.12.09

Case Studies 2018.12.06

Turnkey Compliance and Turnkey Test Automation of USB Type-C

Learn how a semiconductor company was able to rapidly deploy a USB-C test bench, enabling them to deliver their first USB-C design on time and budget.

2018.12.06

Case Studies 2018.11.25

Electronics OEM Taps Keysight Automotive Radar Solution to Support Autonomous Driving R&D

Electronics manufacturer jumpstarts automotive radar application design and test efforts with Keysight solution, saving test development time and improving initial test coverage by over 50 percent.

2018.11.25

Case Studies 2018.11.21

Major Aerospace/Defense Contractor Dramatically Reduces Calibration Turnaround Time Using Keysight Services

This case study revisits a Total Cost of Ownership (TCO) model that can accurately calculate the cost of key ownership factors over the entire life of a test asset. It also discusses the impact of utilization and health monitoring on TCO, otherwise known as effective TCO (eTCO).

2018.11.21

Case Studies 2018.11.15

Testing LTE Connectivity in Cars

A case study on testing LTE connectivity in cars

2018.11.15

Case Studies 2018.11.13

Protecting Government Wireless Systems with Interference Analysis

See how Keysight helps a government telecom agency quickly and easily complete advanced testing and analysis of wireless receivers to protect the wireless system.

2018.11.13

Case Studies 2018.11.08

Electronics Manufacturing Services Company Sets Up Smart Manufacturing Line in Nine Weeks

This case study talks about how a multinational electronics manufacturing services (EMS) company achieved • full manufacturing line setup in 9 weeks with Keysight's I3070 ICT Test Platform.

2018.11.08

Case Studies 2018.10.19

Boosting Singapore’s Cyber Security Skills

We applied our portfolio of technology and expertise to offer a hands-on approach to stay current, upskilled, and updated on the latest tools and technologies: the first Ixia Cyber Combat competition in Singapore.

2018.10.19

Case Studies 2018.09.18

A Leading AR/VR Solution Provider Saves 60% Of Time While Optimizing Battery Life

Learn how a leading AR and VR platform provider is able to reduce the test development and testing time by a whopping 60% and yet significantly improved the battery life of the device by using a new Keysight solution for battery life optimization testing.

2018.09.18

Case Studies 2018.09.12

Full Coherent Receiver Tests for the Fastest Optical Transmission

Learn how Nokia Bell Labs set new world records to design a full coherent receiver for the fastest optical transmission ever with Keysight's UXR-Series oscilloscopes.

2018.09.12

Case Studies 2018.08.16

Successful Installation of NB-IoT and LTE-M Modules

IoT devices are typically installed in remote locations where signals are weak. See how Keysight can help with successful installations of NB-IoT and LTE-M modules.

2018.08.16

Case Studies 2018.07.26

Driving Down the Cost of Testing 1,500 V Photovoltaic Systems

Three leading OEMs for photovoltaic (PV) inverters used Keysight's new test solution for solar inverter designs, saving over 60% in capital investment and cutting data logging and report generation time by over 50%.

2018.07.26

Case Studies 2018.07.03

Battery Maker Cuts Testing Time, Ensures Quality with Innovative Li-Ion Cell Self-Discharge Test

Leading Lithium-Ion cell manufacturer dramatically reduces overall battery test time and improves product quality assurance with innovative self-discharge tests from design to manufacturing.

2018.07.03

Case Studies 2018.07.01

Reduce Network Optimization time by 50%

See how one network operator used Nemo Outdoor and Nemo Analyze to test its NB-IoT network in the lab and in the field and reduced network optimization time by 50%.

2018.07.01

Case Studies 2018.06.20

Transforming RF Research and Teaching in a Major University

See how Keysight vector network analyzers (VNAs) help major university in Japan EE department transforming RF research and teaching.

2018.06.20

Case Studies 2018.06.18

IoT Device Functional Test Solution

Keysight's functional test solution for IoT devices simplifies product testing. See how one company reduced test time by 25% and manufacturing cost by 50%.

2018.06.18

Case Studies 2018.05.23

Handheld Analyzer Improves MRI Performance

Keysight’s FieldFox handheld analyzer has many usages in healthcare environments. See how Fieldfox helped improve MRI performance and cut service time by 50%.

2018.05.23

Case Studies 2018.05.15

IoT Device Manufacturer Improves Battery Life by 50%

See how one IoT Device Manufacturer was able to improve battery life by 50% for their IoT smart city application with help from Keysight.

2018.05.15

Case Studies 2018.05.11

Evaluating Wireless Broadband Gateways for Deployment by Service Provider Customers

Read this case study to see how testing not only helped the provider assess the quality of two competing solutions, but also provided a clear picture of how each compared to enterprise-class wireless access points (APs).

2018.05.11

Case Studies 2018.05.10

Yahoo! Ensures Performance, Security, and Stability of Network Equipment and Cloud Infrastructure

Open the document referenced here to understand how BreakingPoint, PerfectStorm ONE, and the Application and Threat Intelligence (ATI) solution solved Yahoo!'s network security test challenges.

2018.05.10

Case Studies 2018.03.12

Small Unmanned Aerial System – Space Company Wins Big!

See how Keysight's small Unmanned Aerial System (sUAS) solutions helped one space company to accurately characterize their specialized antenna design.

2018.03.12

Case Studies 2018.03.07

Republic Polytechnic Partners with Ixia to Nurture Cyber Security Professionals

Read the RP case study to learn how RP developed a cyber security program called the Diploma in Infocomm Security Management (DISM) to build a pool of skilled cyber security professionals.

2018.03.07

Case Studies 2017.11.30

Minimize Risk When Deploying RF Power Amplifier Test

Minimize measurement risk by learning how customers implemented Keysight's RF power amplifier (PA) test and FEM characterization to achieve greater test throughput.

2017.11.30

Case Studies 2017.11.30

DME Uses N6700 Power Supply to Field Test Military Radios

Learn why the defense electronics firm DME Corporation chose the Keysight N6700 power supply in their ATACTS solution for testing military radios in the field.

2017.11.30

Case Studies 2017.11.30

Enhancing Test Productivity of Airfield Signs

Airfield safety is an important concern for AGM. Find how Keysight’s Wireless Remote Connectivity Solution helps increase productivity of airfield signs.

2017.11.30

Case Studies 2017.11.30

VTEP Goes Head-to-Head with Keysight TestJet

Find how vectorless test EP (VTEP) improves ICT coverage up to 80 percent with TestJet. See test results conducted in Keysight’s R&D lab.

2017.11.30

Case Studies 2017.11.30

Tektron Systems Improved ATE Systems

Using the Keysight N6700 Modular Power System, Textron Systems deployed state-of-the-art ATE systems that are better, smarter and less expensive.

2017.11.30

Case Studies 2017.11.30

3070 ICT Test System: In-Car Safety Systems

See how Keysight’s 3070 ICT test system helped Motorola Angers achieve 3% NFF (no find fault) and improve productivity of their in-car safety system.

2017.11.30

Case Studies 2017.11.30

32-Channel Pressure Measurement System

Read this overview of how the Keysight U2355A multifunction data acquisition (DAQ) device can be used in the Quatronix hydraulic pressure industry.

2017.11.30

Case Studies 2017.11.23

GaN Power Devices Start to be Designed into Power Sources

GaN power devices show significant advantages over silicon in power supply design. Learn proper methods to improve power supply design efficiency using GaN.

2017.11.23

Case Studies 2017.11.02

Validating Automotive Ethernet Conformance and Performance

Learn how BMW Group successfully validates their automotive Ethernet toolchain and ensures delivery of premium-quality vehicle communications.

2017.11.02

Case Studies 2017.10.31

Creating a PN Junction Model with MBP Device Modeling Software

Researchers from IMECAS have proposed a new simulation model for the PN junction based on SOI. See how MBP device modeling software from Keysight was used.

2017.10.31

Case Studies 2017.10.09

Using IC-CAP to Extract a Novel Model for Bulk FinFETs

Case study on how Hangzhou Dianzi University created a novel compact model for bulk FinFETs that accommodates self-heating behaviors using Keysight IC-CAP software.

2017.10.09

Case Studies 2017.09.07

Broadband Service Provider Migrates to Cloud

When a broadband service provider needed to scale and virtualize without compromising QoE, they turned to Ixia test solutions. Using automated testing, network monitoring, and network security and video testing, the provider reduced deployment time significantly and streamlined operations.

2017.09.07

Case Studies 2017.08.07

Fixing Video Disruptions Before They Happen

Read about how a large US telecom provider was able to use virtualization to prevent video delivery problems before they happened.

2017.08.07

Case Studies 2017.08.06

French ISP Relies on Ixia Network Testing and Monitoring Solutions

See how Ixia network testing and network monitoring solutions helped improve visibility--and quality of experience for users.

2017.08.06

Case Studies 2017.07.27

Manufacturer Works with Ixia to Validate Switch Functionality

To help ensure its switches were delivering all the performance they promised, NoviFlow, a manufacturer of SDN switches, needed a robust, scalable testing platform. Read this case study to see how Ixia helped them do rigorous network testing to validate their switch functionality and performance.

2017.07.27

Case Studies 2017.07.23

Mini ICT with VTEP Detects Solder Failure on PCBA board

Find out how one customer reported reduction in bone pile and significant savings on scrap cost after using the Mini ICT systems with VTEP

2017.07.23

Case Studies 2017.07.18

Secure and Compliant, with Greater Visibility

When a secure payment card processing company implemented Ixia network testing and network monitoring solutions, they were able to quickly achieve PCI compliance, improve network security, and set up an efficient and effective vulnerability assessment process. See how they did it.

2017.07.18

Case Studies 2017.07.17

JYVSECTEC Partners with Ixia for Real-World Testing to Improve Security Training

By implementing Ixia BreakingPoint, JYVSECTEC is able to test and simulate DDoS attacks, exploits, malware, and security resilience.

2017.07.17

Case Studies 2017.07.09

i3070 Inline ICT Improves Functional Test Yield

Find out how one customer improved function test yields after installing the i3070 Series 5 Inline ICT system.

2017.07.09

Case Studies 2017.06.28

Network Monitoring Simplifies Troubleshooting

See how Ixia's network monitoring tools simplified and improved network troubleshooting, allowing administrators to spin up and address issues on the fly.

2017.06.28

Case Studies 2017.06.25

Safeguarding Against Cyberattacks

To safeguard against cyberattacks, a personal lines insurer turned to Ixia network monitoring tools. With reliable threat intelligence and better network monitoring, the firm was able to strengthen network security and overall effectiveness.

2017.06.25

Case Studies 2017.06.14

Service Provider Automates Virtual Testing for Faster vIMS Migration

Discover how a US telecom company achieved up to 5x cost savings and sped up time to revenue with test automation that spanned network performance, cloud test, application virtualization as part of an effort to improve its voice over long term evolution services.

2017.06.14

Case Studies 2017.06.14

Telecom Virtualizes Faster With Confidence

See how Ixia solutions helped a European telecom better monitor and manage their network function virtualization (nfv), and software defined networking (sdn).

2017.06.14

Case Studies 2017.06.13

Visibility Solution Pays For Itself

A full-service business communications provider in North America invested in a visibility solution that reduced problem resolution from days to hours and delivered network monitoring capabilities that resulted in a 167% ROI.

2017.06.13

Case Studies 2017.06.06

Design a 2.45 GHz Wireless Power Scavenging Circuit with ADS

See how ST and ESEO designed a 2.45 GHz wireless scavenging circuit using Keysight ADS and achieved a maximum efficiency of 68% at an input power of 20 dBm.

2017.06.06

Case Studies 2017.03.16

STMicroelectronics and University of Lyon Predict EMI Using ADS

Learn how STMicroelectronics and University of Lyon designers used ADS to develop a network parameter block technique to satisfy their need for accurate and general EMI modeling.

2017.03.16

Case Studies 2017.01.17

Global 500 Aerospace and Defense Company Case Study

Read how a Global 500 aerospace & defense company reduced the traffic load on their monitoring or security tools by almost 40% with Ixia’s visibility solutions.

2017.01.17

Case Studies 2017.01.17

Visibility Solutions Case Study: Educational Institution

Read how an educational institution was able to reduce the traffic load on their monitoring or security tools by almost 60% with Ixia’s visibility solutions.

2017.01.17

Case Studies 2017.01.17

Global 500 Energy and Utilities Company Case Study

Read how a Global 500 energy and utilities company realized a return on investment within six months.

2017.01.17

Case Studies 2017.01.17

Fortune 500 Retail Company Case Study

Read how a Fortune 500 retail company reduced the traffic load on their monitoring or security tools by almost 60% with Ixia’s visibility solutions.

2017.01.17

Case Studies 2016.11.08

Global Energy Provider Gains Greater Visibility into Virtual Environment

This case study shows how a South American energy provider was able to use the Ixia Phantom vTap, Phantom HD and Director xStream to get visibility into their virtual environment.

2016.11.08

Case Studies 2016.07.25

Aerospace and Defense Contractor Trims Calibration Time 96%

See how Keysight’s self-calibration solution in electronics reduced lab turnaround time by 96% for a major aerospace and defense calibration company.

2016.07.25

Case Studies 2015.12.14

Digital Transmission System Design Using ADS and Genesys

Learn to minimize design risk and reduce development time of digital transmission systems using Keysight’s design and simulation software, ADS and Genesys.

2015.12.14

Case Studies 2015.04.20

Thales Nederlan Benefits from Keysight Onsite Calibration

Keysight’s Onsite Calibration Service helps Thales Nederland solve product shipment delays and cost overruns due to the long turnaround times for calibration.

2015.04.20

Case Studies 2014.08.23

Flash Programming with the Keysight Utility Card

This case study details the successful implementation of flash programming with the Keysight utility card in the manufacturing environment.

2014.08.23

Case Studies 2014.08.02

Semiconductor Manufacturer Selects the New 34461

This success story discusses how a semiconductor manufacturer likes the familiarity and enhanced features of the new 34461A DMM.

2014.08.02

Case Studies 2014.08.02

Power Device Analyzer for Reliablility in Electric Equipment Production

See how Keysight’s B1505A Power Device Analyzer became an indispensable tool to help JUKI achieve reliable development and production of their sewing machines.

2014.08.02

Case Studies 2014.07.31

In-Circuit Tester – N5747A High-Power Power Supply

This paper discusses how the implementation of N5747A high-power power supply on a networking board project helps in cost saving of a power supply module.

2014.07.31

Case Studies 2014.07.31

In-Circuit Test Channel Partner Interview

Bob Bower, an industry expert in ICT programming discusses how their company was able to offer better solutions by having a channel partnership with Keysight.

2014.07.31

Case Studies 2014.07.30

Automated Test Environment for Notebook Manufacturing

FIC controls cost, improves product quality, and protects its margins by using Keysight’s 3070 in its design and manufacturing processes. Learn how!

2014.07.30

Case Studies 2014.07.30

ADS Helps SiGe Semiconductor get Virtual Samples to Market Fast

See how SiGe semiconductor uses ADS RFIC design from Keysight to provide virtual samples to their customers and has over 30 customer IC design wins.

2014.07.30

Case Studies 2014.07.30

In-Circuit Test Chanel Partner Interview Series

Navigating ICT challenges requires a synergy with fixture and programming houses. Everett Charles new boundary scan improve measurably with Keysight ICT solutions.

2014.07.30

Case Studies 2014.07.30

Throughput Comparison Between Medalist i3070 Series 5 and Predecessor i3070 In-Circuit Test Systems

The new Medalist i3070 Series 5 in-circuit tester has several new features that enable manufacturers to speed up their tests when compared with using the older i3070 series.

2014.07.30

Case Studies 2014.07.30

Inphi Delivers DDR Memory Interface Chip Using the ADS

Learn how Inphi was successful delivering DDR memory interface chips for DDR3-1600 using Keysight’s Advance Design System (ADS).

2014.07.30

Case Studies 2014.07.30

Identifying and Solving GSM Radio Interference

Learn how to Identify GSM 850 radio interference in public safety communications and solve adjacent channel interference.

2014.07.30

Case Studies 2014.07.30

Utilizing Limited Access Tools on ICT System

Explore the seven most effective limited access tools on the Medalist i3070 ICT system to help tackle complex and shrinking printed circuit board assemblies.

2014.07.30

Case Studies 2014.07.30

Cover-Extend Technology for In-Circuit Test

Explains how Cover-Extend Technology helps to enable test access for situations where test access becomes limited with usage of high complexity components.

2014.07.30

Case Studies 2014.07.30

Contract Manufacturer Test Throughput Benefits with Quick70

See how one contract manufacturer used Keysight’s Quick70 upgrade to reduce overall test times 2X from 106.6 seconds to 56.5 seconds.

2014.07.30

Case Studies 2014.07.30

Keysight Utility Cards vs Teradyne ICT Deep Serial Programming

Keysight ICT and utility card flash programming solutions provide greater flexibility to customers when compared to Teradyne deep serial memory programming.

2014.07.30

Case Studies