Here's the page we think you wanted. See search results instead:
cog Technical Overview

Perform 5G NR (New Radio) one-button downlink and uplink measurements defined by 3GPP standards.

Highlights

  • Perform 5G NR (New Radio) transmitter one-button downlink and uplink measurements per 3GPP 5G NR standard Release 15 and Release 16
  • Support large frequency error lock range defined in 3GPP Release 17 NTN and NR-TM2b & 3.1b (1024QAM) defined in 3GPP Release 17
  • Support 3GPP Release 17 defined FR2-2 800/1600/2000 MHz channel bandwidth with new carrier spacing 480 kHz and 960 kHz
  • Support 3GPP Release 17 defined reduced capabilities (RedCap) devices
  • Support 3GPP Release 16 defined eDSS (Enhanced Dynamic Spectrum Sharing) and eMIMO (Enhanced MIMO)
  • Support DL NR-TM presets and ACP/SEM/PvT measurement presets based on performance test specification
  • Support downlink modulation analysis for SS Block (PSS+SSS+PBCH) PBCH-DMRS, PDSCH, PDSCH-DMRS, PDSCH-PTRS, PDCCH, PDCCH-DMRS, CSI-RS and decoding for PBCH, PDCCH, and PDSCH
  • Support uplink modulation analysis for SRS, PUSCH, PUSCH-DMRS, PUSCH-PTRS, PUCCH, PUCCH-DMRS, and PRACH and decoding for PUCCH and PUSCH
  • Spectrum and power measurements: channel power, SEM, ACP, OBW, spurious emissions, transmit On/Off power and CCDF
  • Modulation analysis measurements: I/Q measured constellation, EVM (rms, peak), frequency error, symbol clock error, I/Q offset, Error vector time, Error vector spectrum, In-band emission, Power vs. slot/symbol, EVM vs. RB, TAE and frame summary etc
  • Support both single-port measurement analysis and multiple component carrier (CC) sequential acquisition
  • Support multi-touch user interface and SCPI remote interface programming
  • Support IQ data recording and recalling as RAW Data txt, Signal Studio csv or 89601B sdf file formats
  • Support the fast and easy configuration as saving or recalling component carrier setting *.scp, *.sgen, *.setx, *.nrcc., or *.pwsg to make the modulation analysis measurement
  • KeysightCare software support subscription included
  • Keysight supports tiered X-app models with N-models for UXA/PXA/PXE, E-models for MXA/EXA/MXE/VXT. The higher tiered X-app models can run at the lower platforms, which means N-models can run on all platforms, and E-models can only run on MXA/EXA/MXE/VXT

Software Details

Signal & Spectrum Analyzer Benchtop/Modular/Handheld Firmware Update Center

Extend the Capabilities of Your Product

Software
See Related Software
Accessories
See Related Accessories
Services
See All Services
Support
See All Support

Want help or have questions?

Contact Us