Automotive Customer Center Tech Days

Вот страница, которая, вероятно, Вам нужна. Посмотреть другие результаты поиска:

Live Webinars

Upcoming Virtual Seminars

Streamed Seminars

On-Demand Seminars

Tech Tips

Novi "Tech Tips"

Americas Events

The rate of technology innovation in the automotive industry is exciting and continuously growing. Keysight Technologies, along with our partners, help ensure vehicle systems work reliably, conform to standards, and provide the needed safety and security through our comprehensive automotive test solutions. Come learn from our technical experts using state-of-the-art test equipment and see what Keysight can do for you.

Attendance is no charge, but seats are limited, so please make sure you register soon.

Upcoming Virtual Seminars

Automotive Cybersecurity Penetration Testing

February 16, 2021
10:00 a.m. PT / 1:00 p.m. ET

Penetration testing (pen test) is essential to ensuring robustness in a challenging cybersecurity environment. System-level testing across platforms and firmware versions creates complex challenges for assessing security posture. How can pen-testing integrate with the larger development cycle and emerging standards? This session will review pen testing, ISO/SAE DIS 21434 and UNECE WP.29, and ideas for integration for assured automotive security.

On-Demand Seminars

Automotive Cybersecurity (ACS)

Original broadcast date: November 19, 2019

Streamed from Keysight's Automotive Customer Center in Novi, MI

Testing in the Automotive Radar Ecosystem

Original broadcast date: February 11, 2020

Duration: 2 hours

Streamed from Keysight's Automotive Customer Center in Novi, MI

Electric Vehicle Charging Discovery System (CDS)

Original broadcast date: February 19, 2020

Duration: 1 hour, 22 minutes

Streamed from Keysight's Automotive Customer Center in Novi, MI

Reducing Electromagnetic Interference (EMI) in Switched-Mode Power Supplies

Original broadcast date: April 23, 2020

Duration: 1 hour, 59 minutes

Debugging Automotive & Electronic Signals with Oscilloscopes

Original broadcast date: April 28, 2020

Duration: 1 hour, 44 minutes

Charging Test Challenges for Electric Vehicles (EV)

Broadcast Date: May 6, 2020

Keysight's Charging Discovery System (CDS) is a modular solution for conformance and interoperability test of EV and EVSE charging interfaces. The CDS modular design can be configured to customers' specific needs for testing and validating the charging interface of electric vehicles and charging infrastructures.

Signal Integrity in Memory and Digital Automotive Applications

Broadcast Date: May 12, 2020
Duration: 4 hours

Co-sponsor: TestEquity

Automotive serial buses must be able to operate reliably in the harsh electrical environment of a vehicle where random and infrequent transients occur. New memory technologies (such as LPDDR4), faster processing, and higher sensor resolution are driving significantly faster serial bus speeds, which in turn reduces margins. Successful programs must closely attend to signal integrity for an on-time product launch. This seminar will provide valuable insight into design and measurement methods for meeting program schedules and costs.

Dynamic Characterization of Wide Band Gap (WBG) Semiconductors

Broadcast Date: May 21, 2020
Duration: 2 hours

Co-sponsor: Electro Rent

Please join us as we share the challenges that characterizing and measuring new WBG high-efficiency semi-conductors brings and how Keysight is tackling these challenges with consistent, accurate, and repeatable results.

EMC Pre-Compliance Testing

Broadcast Date: May 27, 2020
Duration: 2 hours

Co-sponsors: Newark

RFPro makes spontaneous EM-circuit co-simulation effortless for designers of RFIC, Modules, Wafer-level packagings, and RF PCBs to achieve design wins in 5G, radars, and IoT.

Fast Fourier Transforms (FFTs) Using Keysight InfiniiVision Oscilloscopes

Broadcast Date: June 16, 2020
Duration: 1 hour

Co-sponsor: TestEquity

This webinar will cover the fundamentals of oscilloscope FFT measurements including independent time-domain and frequency-domain scaling, windowing, measurements, and gating.

Johnnie will also discuss how the new InfiniiVision software package can help you focus on industry applications.

Automotive Ethernet Switch/Gateway Testing

Broadcast Date: June 17, 2020
Duration: 2 hours

Co-sponsors: Electro Rent and Intrepid Control Systems

There are many automotive switched networks currently in development. Understanding the network and gateways from a latency perspective under a variety of loads and configurations is essential to delivering reliable customer experience. What if a frame is missed? What if a camera starts sending bad data at full rate? A Controller Area Network (CAN) is a reliable known quantity, but how predictable is an Automotive Ethernet network? This webinar will help you understand gateway configuration choices and ways to measure that performance.

Battery Test Challenges and Effective Solutions

Original Broadcast Date: July 15, 2020
Duration: 1 hour

Co-sponsor: Newark

With the demand to bring electric vehicles to market now moving up exponentially, getting there faster to take market share is no longer an option, it is required. The demand for battery development to improve durability, power density, and safety at a lower cost is constantly increasing. So are the requirements and extent of testing for performance, function, and aging. This is true for all levels of testing, be it cell chemistry, cell formation, cell, module, and pack. Having comprehensive turn-key test solutions that are efficient is vital for battery development from research and development through validation. Keysight has very comprehensive test solutions at all levels of battery testing to bring you to market faster. Keysight has the answer.

Oscilloscope Triggering Using Keysight InfiniiVision Oscilloscopes

Original Broadcast Date: July 23, 2020
Duration: 1 hour

This webinar will provide an overview of oscilloscope “basics” including auto trigger, normal trigger, and trigger holdoff. We will show you how to use advanced/parametric violation triggering and provide a demo on zone triggering.

Delivering Quiet Power to Automotive Electronics

Original Broadcast Date: August 4, 2020
Duration: 90 min.

Co-sponsor: Newark and Picotest

Automotive electronics running at gigabit data rates and supporting 5G communications cannot neglect the importance of quiet power delivery. Engineers need to know how to use power integrity simulations and measurements during the design phase to reduce power rail noise and avoid EMI failures. Selection of components and placement on the power distribution network can all be modeled and optimized for improving noise margins and avoiding expensive hardware re-spins.

Learn how to use power integrity simulations and measurements during the design phase to reduce power rail noise and avoid EMI failures.

The Basics of Data Acquisition in Automotive

Original Broadcast Date: August 18, 2020
Duration: 90 min.

Co-sponsor: TestEquity

Data acquisition (DAQ) is critical in the automotive industry. It is common for capturing fast strain or vibration measurements, engine performance, acoustics, strain, voltage, current, battery tests, or temperature profile performance in environmental chambers. It is critical to accurately gather the data and make sense of it quickly. This seminar will discuss the basics of data acquisition and highlight how to get the best accuracy, speed, and measurement out of your Keysight test equipment and BenchVue software tools. You will also be introduced to the new DAQ973A and the high channel count 34980A data acquisition systems.

Automotive RF Fundamentals Series

In this four-part series, we will help you to understand and avoid the many potential pitfalls when using RF test equipment (no matter how sophisticated they become).

All four sessions now available on-demand.

Network Analyzer Fundamentals
Network Analyzer Advanced Measurements
Spectrum Analyzer Fundamentals
Spectrum Analyzer Advanced Measurements

Co-sponsor: TestEquity

Charge Discovery: Faster Charging with Higher Power

Original Broadcast Date: September 2, 2020
Duration: 60 min.

Both development and increased sales of electric vehicles (EV) and plug-in hybrid electric vehicles (PHEV) depend on the expansion and utilization of the charging infrastructure and electric vehicle supply equipment (EVSE). Due to the relatively recent standards and the resulting lack of experience in the field, faults in the interaction of EV and EVSE can be observed frequently.

The Scienlab Charging Discovery System – High-Power Series (HP CDS) from Keysight is a modular solution for conformance and interoperability testing of EVs and EVSE high-power charging interfaces with up to 1,500 V DC and ±600 A DC. Thanks to its modular design, the HP CDS can be configured to customers' specific needs for testing and validating the charging interface of electric vehicles and charging infrastructures.

Basics of Charging Conformance & Certification Testing of EV/EVSE Charging Interfaces
Keysight Charging Discovery System – High Power (HP CDS)
Interoperability Testing Configurations
Challenges of High Power Testing and Charging

Co-sponsor: Electro Rent

Challenges and Solutions of Advanced Automotive RADAR System Design

Broadcast date: September 9, 2020
Duration: 60 min.

In this live stream presentation, you will learn about advanced automotive radar system modeling techniques of unique radar waveform designs.

Co-sponsor: Newark

EMC Pre-Compliance Testing in Automotive Design

Original Broadcast Date: October 27, 2020
Duration: 60 min.

This virtual seminar will walk you through the necessary steps for EMC pre-compliance testing before sending your design off to the test lab. You will receive an overview of EMC standards and the various test instruments, software, and techniques used throughout the process. The presenters will also discuss the potential economic impact of conducting EMC pre-compliance tests or not.

Overview of key learnings:

EMC Standards
EMC Test Instruments, Software, and Measurement Techniques
Potential Economic Impact of EMC Pre-Compliance Testing

Co-sponsor: Newark

Vehicle-to-Everything (V2X) Test Series

Session I: V2X Access Layer Developments
On-Demand

What is V2X? What is the latest with DSRC and C-V2X? How are they different? Industry Trends | What does Release 16 add or change?

Session II: V2X Protocol Stack Testing
On-Demand

The ITS Stack | How is it Different Between DSRC and C-V2X? How is it Tested?

Session III: C-V2X Application Layer Testing
On-Demand

Day 1 Use Cases and Scenario Testing | Testing C-V2X in a HIL Environment

Co-sponsors: TestEquity, OmniAir Consortium, and Qualcomm

Advancing the E-Mobility Ecosystem Test Series

Join us for our new "Popular Vote" Series! All three sessions are now available on-demand.

Succeeding in the fast-paced, high-voltage, high-power transition to electric vehicles (EV) requires readily available, safe, and accurate test equipment. This seminar series will provide an overview of Keysight's comprehensive EV test solutions to advance the e-Mobility ecosystem.

You vote (live!) and decide on the specific topics that are presented during each session...you choose, we deliver!

Potential Topics:

Battery Test: cell design and formation, cell/module/pack test and characterization, Li-ion self-discharge testing, and battery management system test
EV Power and Charging: DC-DC converter test, DC emulation, traction motor inverter testing, and charging interoperability testing

Co-sponsor: Electro Rent

EV Testing - From the Grid to the Road

Original broadcast date: January 20, 2021
60 minutes

Electric Vehicles (EV) are one of the biggest investment areas in the automotive industry today. Succeeding in this fast-paced, high-voltage, high-power transition to EVs requires readily available, safe, and accurate test equipment. This seminar series will provide an overview of Keysight's comprehensive EV test solutions to advance the e-Mobility ecosystem from the grid to the road.