Вы искали эту информацию? Посмотреть другие результаты поиска:


Связаться с экспертом

N4214A POS-PHY Level 4 (also known as SPI-4.2) Protocol Analysis Tool

Статус продукта: Устарело | Варианты сервисной поддержки
Этот продукт больше не поставляется

Для данного продукта вариантов замены не найдено.

Ключевые возможности и технические характеристики


  • Displays SPI-4.2 data captured by a logic analyzer in a textual decode
  • Detects and indicates data corruption errors in control symbols and packets
  • 16760A logic analyzer allows real-time filtering of Idle bus cycles
  • Allows post-processing filters of protocol data to allow customized view of packet information


The N4214A POS-PHY Level 4 protocol analysis tool is optional software that adds protocol decode and error detection capabilities to the logic analyzer. This tool helps you analyze data traveling across POS-PHY Level 4 (also known as SPI-4.2) buses in a high-level protocol display.

Working together with the Keysight 16760A logic analyzer module (which allows real-time filtering of Idle bus states to maximize the effectiveness of the analyzer´s deep memory), this tool also provides multi-layer packet decode of protocols such as ATM, Ethernet, Packet Over SONET (Point-to-point protocol), and TCP/IP. This tool also detects DIP-4 bus parity errors as well as 32-bit packet CRC errors when present.

All SPI-4.2 traffic is time-stamped in the logic analyzer for time-correlation measurements with other system buses such as RapidIO, , microprocessor bus, memory interface, network processors, etc.