Вы искали эту информацию? Посмотреть другие результаты поиска:

 

Связаться с экспертом

Рекомендуемая конфигурация  

Рекомендуемая конфигурация

E4980AL Precision LCR Meter

  • R-51B-001-Z Return to Keysight Warranty - 3 years
  • E4980AL-032 20Hz to 300 kHz with DCR
  • E4980AL-710 No Interface
  • E4980AL-710 No Interface

Конфигурировать

Prices for: Россия

* Цены могут быть изменены без уведомления. Указанные цены являются рекомендованными ценами производителя на условиях CIP, не включают налоговых и таможенных сборов.

E4980AL-032 20Hz to 300 kHz with DCR
E4980AL-052 20Hz to 500 kHz with DCR
E4980AL-102 20Hz to 1 MHz with DCR
E4980AL-1A7 Calibration + Uncertainties + Guardbanding (Not Accredited)
E4980AL-1CM Rack mount kit
E4980AL-201 Handler interface
E4980AL-301 Scanner interface
E4980AL-A6J ANSI Z540-1-1994 Calibration
E4980AL-ABA U.S. - English localization
E4980AL-ABJ Japan - Japanese localization
E4980AL-PLG Continental European power cord - ONLY FOR EU DISTR W MULT PWR CORD STANDARDS
16034E
Test Fixture (SMD Components) 

Test Fixture (SMD Components)

16034E
The 16034E test fixture is designed for impedance evaluations of SMD components.
16034G
SMD Test Fixture 

SMD Test Fixture

16034G
The 16034G is a test fixture for impedance measurements.
16034H
SMD Array Type LCR Test Fixture 

SMD Array Type LCR Test Fixture

16034H
The 16034H is designed for impedance evaluations of array-type SMD.
16047A
Test Fixture (Axial and Radial) 

Test Fixture (Axial and Radial)

16047A
The 16047A is designed for impedance evaluation of axial/radial lead type devices.
16047E
Test Fixture 

Test Fixture

16047E
The 16047E is designed for impedance evaluation of lead type devices
16048A
Test Lead, BNC Connector to BNC Connector Board 

Test Lead, BNC Connector to BNC Connector Board

16048A
The 16048A test leads extend the measurement port with a 4 terminal-pair configuration.
16065A
200 Vdc External Voltage Bias Fixture 

200 Vdc External Voltage Bias Fixture

16065A
The 16065A test fixture makes it possible to measure a DUT with up to +/-200V DC BIAS.
16065C
40Vdc External Voltage Bias Adapter 

40Vdc External Voltage Bias Adapter

16065C
The 16065C adapter is designed to operate specifically with the 4263A/B, 4268A and 4278A.
16089A
Large Kelvin Clip Lead 

Large Kelvin Clip Lead

16089A
The 16089A makes it possible to measure odd-shaped components that cannot be measured with conventional fixtures.
16089B
Medium Kelvin Clip Lead 

Medium Kelvin Clip Lead

16089B
The 16089B makes it possible to measure odd-shaped components that cannot be measured with conventional fixtures.
16089C
Kelvin IC Clip Lead 

Kelvin IC Clip Lead

16089C
The 16089C makes it possible to measure odd-shaped components that cannot be measured with conventional fixtures.
16334A
Test Fixture (Tweezers Contacts) 

Test Fixture (Tweezers Contacts)

16334A
The 16334A is designed for impedance evaluations of SMD.
16380A
Standard Air Capacitor Set (1pF to 1000pF) 

Standard Air Capacitor Set (1pF to 1000pF)

16380A
The 16380A is a standard capacitor set consisting of four precision capacitors
16380C
Capacitance Standard Set - 0.01uF to 10uF 

Capacitance Standard Set - 0.01uF to 10uF

16380C
The 16380C is a standard capacitor set consisting of three precision capacitors - 0.01uF (16385A), 0.1uF (16386A), 1uF (16387A),and an optional 10uF (16338A).
16451B
Dielectric Test Fixture 

Dielectric Test Fixture

16451B
The 16451B is used to evaluate the dielectric constant of solid dielectric materials accurately, and complies with ASTM D150.
16452A
Liquid Test Fixture 

Liquid Test Fixture

16452A
The 16452A provides accurate dielectric constant and impedance measurements of liquid materials.
42030A
Four Terminal Pair Standard Resistor Set 

Four Terminal Pair Standard Resistor Set

42030A
The 42030A is a standard resistor set consisting of nine precision resistor standards which range from 1 mΩ to 100 kΩ.
42090A
Open Termination (4-Terminal Pair) 

Open Termination (4-Terminal Pair)

42090A
The 42090A is an open termination and is primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers.
42091A
Short Termination (4-Terminal Pair) 

Short Termination (4-Terminal Pair)

42091A
The 42091A is a short termination and is primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers.
82357B
Интерфейс USB/GPIB 

Интерфейс USB/GPIB

82357B
Интерфейс USB/GPIB Keysight 82357B обеспечивает непосредственное подключение приборов GPIB к USB порту ПК или ноутбука.

Contact Keysight for option pricing.

R-50C-011-3 Calibration Plan - Return to Keysight - 3 years
R-50C-011-5 Calibration Plan - Return to Keysight - 5 years
R-50C-011-MU-3 Keysight Calibration + Uncertainties - 3 years
R-50C-011-MU-5 Keysight Calibration + Uncertainties - 5 years
R-50C-016-3 Keysight Calibration + Uncertainties + Guardbanding - 3 years
R-50C-016-5 Keysight Calibration + Uncertainties + Guardbanding - 5 years
R-51B-001-5Z Extended Warranty - Return to Keysight - 5 years

Contact Keysight for option pricing.

Сопутствующие продукты и решения

  • E4980A Precision LCR Meter E4980A Прецизионный измеритель LCR, от 20 Гц до 2 МГц 

    E4980A Прецизионный измеритель LCR, от 20 Гц до 2 МГц

    • Диапазон частот: от 20 Гц до 2 МГц
    • Погрешность измерений: ±0,05%
    • Встроенный источник напряжения смещения до 40 В и измерительного сигнала до 20 В СКЗ (опция 001)
    • Источник постоянного тока смещения до 40 А (опция 002)

  • no image available N1500A Materials Measurement Suite 

    N1500A Materials Measurement Suite

    • Software automates complex permittivity and permeability measurements
    • Flexible option configuration
    • One simple installation program and integrated method option loader switches seamlessly between the different measurement methods

  • no image available N1501A Dielectric Probe Kit 

    N1501A Dielectric Probe Kit

    • Designed to work with N1500A materials measurement suite to measure complex permittivity
    • Best for measuring liquids and conformable solids
    • Flexible option configuration allows you to choose only the hardware you need