Вы искали эту информацию? Посмотреть другие результаты поиска:

 

Связаться с экспертом

E2613B 0.5 mm Wedge Probe Adapter for TQFP and PQFP, 3 Signal qty 2

Статус продукта: Производство прекращено | Поддерживается
Этот продукт больше не поставляется

Для данного продукта вариантов замены не найдено.

Ключевые возможности и технические характеристики

  • Easy connection to surface mount ICs
  • Safe, with no chance of shorting
  • Mechanically non-invasive contact

Описание

The Keysight E2613B is a wedge probe adapter for thin quad flat pack (TQFP) or plastic quad flat pack (PQFP) surface mounted ICs. If you've ever tried to probe a surface mount component, you've probably experienced one or more of the following frustrating situations: accidentally shorting IC pins together; electrical and/or mechanical problems with soldering small wires onto leads; and/or holding multiple probes and trying to use your scope at the same time. The Keysight Wedge Probe Adapter provides a solution to these frustrations.

It is easy to insert and stays put - no need to solder small wires onto leads. The Wedge is mechanically non-invasive, so you won't damage the legs of the IC. It makes two contact points with each leg of the IC. This redundant physical connection increases the electrical reliability of the connection.

  • Easy connection to surface mount ICs
  • Safe, with no chance of shorting
  • Mechanically non-invasive contact
  • Operating voltage: less than 40 V (dc + peak ac)
  • Operating current: 0.5 A maximum
  • Capacitance between contacts: 2 pF (typical)
  • Self-inductance: 15 nH (typical)
  • Contact resistance: less than 0.1 Ohm