Aqui está a página que achamos que você queria. Veja o resultado da pesquisa ao invés de:


Contate um especialista

N8211A Performance Analog Upconverter LXI Module, 250 kHz to 40 GHz

Status do Produto: Descontinuado | Com Suporte
Este produto não se encontra disponível

Esse produto foi substituído por um novo:


LXI Logo

N8211A performance analog upconverter synthetic instrument module is an analog microwave source that generates a stimulus signal by upconverting a baseband signal with superior AM, FM, phase and pulse modulation capabilities (external or internal modulation). The N8211A is based upon the PSG analog signal generator's high output power, low phase noise and excellent level accuracy.

The synthetic instrument family offers the highest-performing RF/MW LAN-based modular instrumentation and the smallest footprint for automated test systems (ATSs); providing the maximum flexibility, and minimizing the cost of an ATS over its lifetime. See a photo of the small modular size mounted in a rack.


  • LXI compliant
  • Similar performance to the E8257D PSG
  • Coherent LO input/output ports allowing use of a common LO signal with multiple upconverters to provide coherent upconversion capability
  • CW, digital step, or analog ramp sweeps
  • Optional step attenuator; narrow pulse capability; enhanced phase noise performance
Frequency range: 250 kHz to 20/40 GHz with .001 Hz resolution
Sweep types: CW, digital step, or analog ramp
Number of points: 2 to 65535, or 2 to 1601 per table
Triggering: Auto, external, single, LAN, or trigger bus
Output power: -20 to +13 dBm typical (for 250 kHz to 20 GHz)
-20 to +9 dBm typical (for 250 kHz to 40 GHz)
Step attenuator: (Option 1E1) decreases output power by typically 2 dB
Narrow pulse: (Option UNW) decreases output power by typically 3 dB
High power: (Option 1EA) increases output power by typically 5 dB
Step attenuator range: 0 dB and 5 to 115 dB in 10 dB steps
Power level accuracy:1 ±0.6 dB to ±1.0 dB
Leveling modes: Internal and external detectors
Spectral purity: < -55 dBc typical (2 to 20 GHz)
< -50 dBc typical (20 to 40 GHz)
FM modulation bandwidth: DC to 1 MHz (typical)
AM modulation: DC coupled, 0 to 100 kHz
AC coupled, 10 Hz to 100 kHz, usable to 1 MHz
Phase modulation: 10 to 320 radians, normal bandwidth mode
1 to 32 radians, high bandwidth mode
Pulse modulation:2 * Refer to following 5 lines
On/off ratio: 80 dB
Rise/fall times: 6 ns (typical)
Minimum pulse width: 0.5 µs (typical)
Pulse repetition frequency: DC to 1 MHz
Pulse modulation level accuracy: ±0.5 dB
1 Dependent on frequency and lower level range.
2 For frequencies above 3.2 GHz.
Ordering Information  
N8211A Analog upconverter synthetic instrument module
N8211A-520 Frequency range from 250 kHz to 20 GHz
N8211A-540 Frequency range from 250 kHz to 40 GHz
N8211A-1E1 Step attenuator
N8211A-1EA High output power
N8211A-UNX Enhanced phase noise performance
N8211A-UNU Standard pulse modulation
N8211A-UNW Narrow pulse modulation
N8211A-UNT AM, FM, PM modulation
N8211A-007 Analog ramp sweep interface (does not support 8757)
N8211A-1EH Low-band harmonics improved below 2 GHz