Acreditamos que esta é a página você estava procurando. Veja o resultado da pesquisa ao invés de:

Highlights

Bandwidth:

  • 3.5 GHz

Range:

  • Dynamic Range: +/- 2.5V
  • DC Offset Range: +/- 12V when using probe offset
  • Maximum Voltage: +/- 30V

Input Impedance:

  • Differential Input R: 50 kOhm
  • Differential Input C: 0.27-0.34 pF
  • Single Ended Input R: 25 kOhm
  • Single Ended Input C: 0.44-0.67 pF

For high-speed differential or single-ended probing in embedded designs, the InfiniiMax 3.5 GHz 1131B differential probe amplifier is a perfect complement to Infiniium 2.5 to 3 GHz oscilloscopes. Its extremely low input capacitance, flat frequency response and patented resistor probe tip technology provide ultra-low loading of the DUT and superior signal fidelity. The InfiniiMax 1130B-34B Series supports a wide variety of real-world applications with an extensive line up of probe heads and accessories. The accessories can meet the most demanding mechanical access requirements.

The 1131B is the RoHS compliant version of the 1131A. The 1131B is 100% form, fit, function and price equivalent to the 1131A.

To see the other available probe head accessories for InfiniiMax 1130B-34B, visit InfiniiMax probe accessories.

Extend The Capabilities

Accessories
Ver todos os acessórios

Featured Resources

Application Notes 2017.11.30

Improving Performance in Active Oscilloscope Probes

Improving Performance in Active Oscilloscope Probes

Keysight’s new InfiniiMax high bandwidth scope probe provides interchangeable probe heads that are optimized for a variety of high-bandwidth uses.

2017.11.30

Application Notes 2017.11.30

InfiniiMax Oscilloscope Probes Impact on (ROHS) Lead–Free Compliance

InfiniiMax Oscilloscope Probes Impact on (ROHS) Lead–Free Compliance

Some Keysight InfiniiMax oscilloscope probe heads are intended for soldering to the device under test. Read about the impact to lead-free (ROHS) Compliance.

2017.11.30

Application Notes 2017.11.30

Extending the Operating Range of InfiniiMax Probes

Extending the Operating Range of InfiniiMax Probes

Learn how to extend the operating range of Keysight InfiniiMax probes in voltage, temperature, and distance (reach) between probe amplifiers and heads.

2017.11.30

Application Notes 2024.01.23

Oscilloscope Probing for High-speed Signals

Oscilloscope Probing for High-speed Signals

The probe is the dominant factor in determining the noise floor and response of your measurement system. Learn more about this and probe loading effects.

2024.01.23

Technical Overviews 2021.09.23

Oscilloscope Probes and Accessories

Oscilloscope Probes and Accessories

To get the most out of your oscilloscope, you need the right probes and accessories for your applications. Keysight offers a wide selection of high-quality probes and accessories for your scope.

2021.09.23

Application Notes 2018.06.20

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Keysight InfiniiMax differential probes are DSP corrected to have a flat magnitude and phase response to provide the highest possible accuracy. The bandwidth chosen to correct to is typically around 3dB non-corrected bandwidth. Usually, extending the bandwidth much beyond that point will increase the noise floor, and if pushed even further, can cause unrealistic noise artifacts. This application note presents the techniques used to extend the bandwidth performance of the InfiniiMax 1169A/B and the N5381A/B solder-in head using the PrecisionProbe application on Infiniium realtime oscilloscope.

2018.06.20

Application Notes 2023.03.12

Probe Soldering Guidelines for Keysight InfiniiMax Probes

Probe Soldering Guidelines for Keysight InfiniiMax Probes

There are various ways to connect test instrumentation probes to devices under test (DUTs). One such method is soldering, which provides a reliable connection and minimizes parasitic probing effects by keeping wire lengths and connections as short as possible. Many of Keysight’s high performance oscilloscope probes utilize soldered connections. As probes and devices continue to shrink, using the correct tools and soldering skills becomes even more critical in order to avoid damage and connectivity issues. This guide provides helpful tips, recommended tools, and techniques specific to Keysight probes to help test engineers make the most out of their soldered-in probes and connections.

2023.03.12

Oscilloscope Probes Selection Guide

Oscilloscope Probes Selection Guide

Keysight offers a broad range of voltage, current, and optical probing solutions for InfiniiVision and Infiniium Series oscilloscopes.
Veja todos os recursos

Veja todos os recursos

Want help or have questions?

Contact Us