Aqui está a página que achamos que você queria. Veja o resultado da pesquisa ao invés de:

 

Contate um especialista

85047A S-Parameter Test Set, 50 Ohms, 300 kHz to 6 GHz

Status do Produto: Obsoleto | Veja opções de Serviço
Este produto não se encontra disponível

Nenhum substituto foi encontrado para esse produto.

Principais recursos e especificações

  • Measures reflection and transmission characteristics of two-port devices in either direction with a single connection.
  • Includes a frequency doubler that can be switched in to measure 3 MHz to 6 GHz in a single sweep
  • Full frequency range of 300 kHz to 6 GHz is available for 8753D/E/ES and selected 8702 configurations
  • Exhibits <5 dB insertion loss between the RF input and the test ports
  • 15 dBm at the test port
  • Includes a programmable step attenuator

Descrição

Discontinuance Notice: The Keysight 85047A will be discontinued as of October 31, 2006.

Keysight ENA network analyzers are the recommended new network analyzers. ENA models offer fast and accurate RF component measurements for both R&D evaluations and production testing. Additional ENA information

View Keysight's recommended replacement products - Migration Guide

The Keysight 85047A test set provides the capability to measure transmission and reflection characteristics (including S-parameters) of two-port devices in either direction with a single connection. The test set is controlled from the analyzer and includes programmable step attenuators. It includes a frequency doubler that can be switched in to measure 3 MHz to 6 GHz in a single sweep or switched out to measure 300 kHz to 3 GHz in a single sweep. The Keysight 8753B/C network analyzers and selected 8702 lightwave component analyzer configurations control the frequency doubler. (The 8753D/E/ES and selected 8702 configurations with built-in 6 GHz source do not use the frequency doubler.) Option 006 (6 GHz receiver) is required to activate the 85047A.

 

  • Measures reflection and transmission characteristics of two-port devices in either direction with a single connection.
  • Includes a frequency doubler that can be switched in to measure 3 MHz to 6 GHz in a single sweep
  • Full frequency range of 300 kHz to 6 GHz is available for 8753D/E/ES and selected 8702 configurations
  • Exhibits <5 dB insertion loss between the RF input and the test ports
  • 15 dBm at the test port
  • Includes a programmable step attenuator