Copyright (C) 2013, 2014 Agilent Technologies, Inc. Table of Contents: Agilent September 25, 2014 ================== 1. Operating System versions 2. Installation 3. Agilent MD2 File List 4. Releases History ============================================================================= 1. Operating System versions: ======================================== 32-bit OS: Windows Vista Windows 7 64-bit OS: Windows Vista64 Windows 7 64 ============================================================================= 2. Installation: ================ >> Windows operating system: You must have administrator rights to install the Agilent MD2 High-Speed Digitizer software. Depending on your User Account Control Settings, you could be notified in the User Access Control dialog to accept that the installer will make changes in your computer. Install MD2 Software The latest Agilent IO Libraries Suite must be installed prior to installing Agilent MD2 High-Speed Digitizer software. Install it from its respective CD (shipped with your product) or install it from the web at: http://www.agilent.com/find/iosuite >> Support Should you encounter any installation problem, a list of contact information is available from: http://www.agilent.com/find/assist. ============================================================================= 3. Agilent MD2 File List: ========================= TargetDir = %ProgramFiles%\Agilent\MD2 on 32-bit OS TargetDir = %ProgramFiles(x86)%\Agilent\MD2 on 64-bit OS IviRootDir32 = %ProgramFiles%\IVI Foundation\IVI on 32-bit OS IviRootDir32 = %ProgramFiles(x86)%\IVI Foundation\IVI on 64-bit OS IviRootDir64 = %ProgramFiles%\IVI Foundation\IVI on 64-bit OS SystemRoot = %SystemRoot% Destination Directory = \Bin AgMD2UpdateFirmware.exe AgMD2Verify.exe AqMeasStd.dll AqMeasStd_64.dll Destination Directory = \Driver (Low Level Driver) agmd2.cat (Low Level Driver) AgMD2.inf (Win32 Driver) AgMD2.sys (x64 Driver) AgMD2_64.sys AgMD2Resources.dll AgMD2-x64.msi AgMD2-x86.msi Destination Directory = \Help AgMD2_LabVIEW_Help.chm AgMD2_SoftwareMigration.pdf U5303_DataSheet.pdf U5303_StartupGuide.pdf U5303_UserManual.chm U5309_DataSheet.pdf U5309_StartupGuide.pdf U5309_UserManual.chm U5340_DataSheet.pdf Destination Directory = \LabVIEW Driver 20xx\Agilent MD2 Destination Directory = \LabVIEW Driver Help AgMD2_LabVIEW_Help.chm Destination Directory = \Bin AgMD2.dll Destination Directory = \Bin\Primary Interop Assemblies Agilent.AgMD2.Interop.dll Agilent.AgMD2.Interop.xml Destination Directory = \lib\msc AgMD2.lib Destination Directory = \Lib_x64\msc AgMD2.lib Destination Directory = \include AgMD2.h Destination Directory = \Bin AgMD2_64.dll Destination Directory = \Bin\Primary Interop Assemblies Agilent.AgMD2.Interop.dll Agilent.AgMD2.Interop.xml Destination Directory = \Lib_x64\msc AgMD2.lib Destination Directory = \include AgMD2.h Destination Directory = \System32 AgMD2Resources.dll Destination Directory = \System32\Drivers AgMD2.sys AgMD2_64.sys ============================================================================= 4. Releases History: ==================== Agilent MD2 1.4.3 (September 2014) ================================== Release Notes: -------------- - Added U5309A 8-channel (-CH8) support, and new real-time processing options for the 2-channel (-CH2) version: average (AVG), peak detection (PKD) and Triggered Simultaneous acquisition and Readout (TSR). - Known defects: U5309A-CH2 only: in digitizer mode, and at sample rates of 1 GS/s or less, the internal (digital) trigger position returned by the data readout is wrong (constant time offset). This does not affect other acquisition modes such as averager or peak detection. - New firmware files: U5309ACH8DPULX2DGT.bit U5309ACH8DPULX2FDK.bit - Updated firmware files: U5303ADPULX2AVG.bit Enhanced readout performance. Reduce Self-Trigger jitter. U5303ADPULX2DGT.bit Corrected minor TSR defect (under some circumstances aborting the acquisition could lead to mandatory re-initialization). U5309ADPULX2DGT.bit Added decimation support and Triggered Simultaneous acquisition and Readout (TSR). Enhanced readout performance. autorun .exe 1.4.18.3 MD2_Setup.exe 1.4.18.2 IVI Driver 1.4.276.2 LabVIEW Driver 1.2.2 Agilent.AgMD2.Interop.dll 1.4.276.2 AgMD2.dll 1.4.276.2 AgMD2_64.dll 1.4.276.2 AgMD2.sys 80.3.17914.4 AgMD2_64.sys 80.3.17914.4 AgMD2Resources.dll 80.3.16603.3 AgMD2UpdateFirmware.exe 1.1.832.3 AgMD2Verify.exe 1.2.2471.5 AqMeasStd.dll 1.7.3.4252 AqMeasStd_64.dll 1.7.3.4253 U5303ACTRL_DPULX2.mcs 1.0.247 U5303ADPULX2AVG.bit 3.2.311 U5303ADPULX2DGT.bit 3.2.278 U5303ADPULX2FDK.bit 3.2.0 U5303ASR0DPULX2DGT.bit 3.2.204 U5303ASR0DPULX2FDK.bit 3.2.0 U5303ASR3DPULX2DGT.bit 3.2.200 U5309ACH2DPULX2FDK.bit 3.2.0 U5309ACH8DPULX2DGT.bit 3.2.308 U5309ACH8DPULX2FDK.bit 3.2.0 U5309ACTRL_DPULX2.mcs 1.0.248 U5309ADPULX2AVG.bit 3.2.152 U5309ADPULX2DGT.bit 3.2.280 ____________________________________________________________________________ Agilent MD2 1.3.2 (July 2014) ============================= Release Notes: -------------- - New LabVIEW driver. - New tool AgMD2UpdateFirmware.exe - New firmware files: U5303ACTRL_DPULX2.mcs U5303ADPULX2AVG.bit U5303ASR0DPULX2DGT.bit U5303ASR0DPULX2FDK.bit U5303ASR3DPULX2DGT.bit U5309ACH2DPULX2FDK.bit U5309ACH8DPULX2DGT.bit U5309ACH8DPULX2FDK.bit U5309ACTRL_DPULX2.mcs U5309ADPULX2AVG.bit - Updated firmware files: U5303ADPULX2DGT.bit (was U5303ADPULX2DIG.bit in previous releases) Added decimation support and Triggered Simultaneous acquisition and Readout (TSR). Enhanced readout performance. U5303ADPULX2FDK.bit Enhanced readout performance. U5309ADPULX2DGT.bit (was U5309ADPULX2DIG.bit in previous releases) Added decimation support and Triggered Simultaneous acquisition and Readout (TSR). Enhanced readout performance. ----------------------------------------------------------------------------- Important Note for existing U5303A and U5309A Users : This MD2 1.3 release requires an update of the Module Control FPGA (version 1.0.247 or newer). Please refer to the section Firmware Upgrade Utility in the Product's User Manual for more information on how to update the control FPGA. ----------------------------------------------------------------------------- autorun .exe 1.3.465.2 MD2_Setup.exe 1.3.465.2 IVI Driver 1.3.767.4 LabVIEW Driver 1.2.2 Agilent.AgMD2.Interop.dll 1.3.767.4 AgMD2.dll 1.3.767.4 AgMD2_64.dll 1.3.767.4 AgMD2.sys 80.3.17914.4 AgMD2_64.sys 80.3.17914.4 AgMD2Resources.dll 80.3.16603.3 AgMD2UpdateFirmware.exe 1.1.357.3 AgMD2Verify.exe 1.2.1994.4 AqMeasStd.dll 1.7.3.3941 AqMeasStd_64.dll 1.7.3.3942 U5303ACTRL_DPULX2.mcs 1.0.247 U5303ADPULX2AVG.bit 3.2.244 U5303ADPULX2DGT.bit 3.2.258 U5303ADPULX2FDK.bit 3.2.0 U5303ASR0DPULX2DGT.bit 3.2.204 U5303ASR0DPULX2FDK.bit 3.2.0 U5303ASR3DPULX2DGT.bit 3.2.200 U5309ACH2DPULX2FDK.bit 3.2.0 U5309ACH8DPULX2DGT.bit 3.2.268 U5309ACH8DPULX2FDK.bit 3.2.0 U5309ACTRL_DPULX2.mcs 1.0.248 U5309ADPULX2AVG.bit 3.2.152 U5309ADPULX2DGT.bit 3.2.256 ____________________________________________________________________________ Agilent MD2 1.1.4 (January 2014) ================================ Release Notes: -------------- - U5309A 8bit digitizer support. - LabVIEW 20xx driver. - New firmware files: U5309ADPULX2DIG.bit autorun .exe 1.1.528.4 MD2_Setup.exe 1.1.528.4 IVI Driver 1.1.771.5 LabVIEW Driver 1.0.3 Agilent.AgMD2.Interop.dll 1.1.771.5 AgMD2.dll 1.1.771.5 AgMD2_64.dll 1.1.771.5 AgMD2.sys 80.3.16603.3 AgMD2_64.sys 80.3.16603.3 AgMD2Resources.dll 80.3.16603.3 AgMD2Verify.exe 1.1.1010.2 AqMeasStd.dll 1.7.1.2124 AqMeasStd_64.dll 1.7.1.2125 U5303ADPULX2DIG.bit 3.0.174 U5303ADPULX2FDK.bit 3.0.194 U5309ADPULX2DIG.bit 3.0.108 _____________________________________________________________________________ Agilent MD2 1.0.6 (July 2013) ============================= Release Notes: -------------- First release. - U5303A 12bit digitizer support. - U5340A FPGA Development Kit for high-speed digitizers support. autorun .exe 1.0.360.6 MD2_Setup.exe 1.0.360.6 IVI Driver 1.0.100.6 Agilent.AgMD2.Interop.dll 1.0.100.6 AgMD2.dll 1.0.100.6 AgMD2_64.dll 1.0.100.6 AgMD2.sys 80.3.16603.3 AgMD2_64.sys 80.3.16603.3 AgMD2Resources.dll 80.3.16603.3 AgMD2Verify.exe 1.0.169.3 AqMeasStd.dll 1.7.0.699 AqMeasStd_64.dll 1.7.0.700 FPGA Bitfiles: U5303ADPULX2FDK.bit 3.0.194 U5303ADPULX2DIG.bit 3.0.174