Вы искали эту информацию? Посмотреть другие результаты поиска:

 

Связаться с экспертом

Техническая поддержка

Электронные измерения

Поддержка по номеру модели:

Уточнить список

убрать все фильтры

По Отрасли/Технологии

По типу содержания

По типу оборудования

1-25 из 3348

Упорядочить:
What is the difference between an equivalent time and a real-time oscilloscope? - Application Note
This document will discuss how each type of oscilloscope samples the incoming waveform and explain the trigger requirements.

Руководство по применению 2018-12-05

Capacitance Measurement Basics for Device/Material Characterization - Application Note
This application note explains capacitance measurement basics for device/material characterization using Keysight B1500A Semiconductor Device Analyzer.

Руководство по применению 2018-12-05

UWB Antenna Measurements with the 20 GHz E5071C ENA Network Analyzer
This app note discusses the benefits of using 20 GHz ENA network analyzers for UWB antenna measurements, and presents a measurement example using the ENA's gating function.

Руководство по применению 2018-12-05

PDF PDF
Eliminate Potential Measurement Errors and Achieve the Greatest Accuracy in Digital Multimeters
This application note is one in a series of three, that will help you eliminate potential measurement errors and achieve the greatest accuracy with a DMM. This application note covers system cabling errors and dc voltage measurement errors. For an overview of ac voltage measurement errors, see application note, literature number 5988-5512EN.. For a discussion of resistance, dc current, ac current and frequency and period measurement errors,see application note, literature number 5988-5513EN.

Руководство по применению 2018-12-05

6 Hints for Enhancing Measurement Integrity in RF/Microwave Test Systems - Application Note

Руководство по применению 2018-12-01

Wavelength and Polarization Dependence of 100G-LR4 Components - Application Note
This application note describes our solution based on the new 81606A or 81608A tunable lasers, for measuring the wavelength and polarization dependence of components for 100G optical links that multiplex multiple wavelengths. Both passive fiber optic components and receiver optical subassemblies are addressed.

Руководство по применению 2018-11-13

Using SystemVue to Integrate a Flexible R&D Testbed for LTE
Explore how to build an integrated SystemVue model for testing LTE base station receiver measurements.

Руководство по применению 2018-07-31

PDF PDF
LTE-Advanced Signal Generation and Measurement Using SystemVue
Learn how to use Keysight SystemVue to generate various downlink and upload signals, use different MIMO models, and measure closed-loop throughput.

Руководство по применению 2018-07-31

PDF PDF
Understanding LTE-Advanced Base Station Transmitter RF Conformance Testing
Learn how to characterize LTE-A base station transmitters using the 3GPP RF conformance tests with carrier aggregation.

Руководство по применению 2018-07-19

PDF PDF
Overcoming Interference is Critical to Success in a Wireless IoT World - White Paper
This white paper highlights the importance of co-existence testing and step-by-step guide on how it can be done in the lab.

Руководство по применению 2018-07-17

PDF PDF 2.37 MB
First Steps in 5G: Overcoming New Radio Device Design Challenges Series - Part 3 - White Paper
MIMO, beam steering, and beamforming are the most talked about technologies in 5G. They are essential to deliver 100x the data rates and 1000x the capacity goals specified in IMT-2020 vision.

Руководство по применению 2018-07-10

PDF PDF 3.52 MB
De-Risking 5G Product Development - White Paper
Part 1 of this white paper series explores the challenges facing developers of 5G chipsets, devices, network equipment, and carrier networks.

Руководство по применению 2018-07-09

PDF PDF 5.30 MB
First Steps in 5G: Overcoming New Radio Device Design Challenges Series - Part 4 - White Paper
Over-the-air (OTA) testing is one of the most challenging aspects of 5G device development. In this series, we’ve looked at many aspects of 5G for device designers, including the new 5G NR standard, flexible numerology, millimeter-wave (mmWave) design considerations, MIMO, and beamforming challenges. The combination of these technologies introduces substantial new test challenges that can only be validated with OTA testing.

Руководство по применению 2018-07-06

PDF PDF 3.44 MB
Probing a Midpoint of a Transmission Line that is Not Load Terminated - White Paper
With the advent of variable on die termination (i.e. ODT) many systems like low power double data rate memory (LPDDR) have the ability to either terminate a line in its characteristic impedance for high speed operation or terminate it with an open for lower speed operation. Many times there is a desire to probe the transmission line to monitor the signals on the line. When the transmission line is terminated in close to its characteristic impedance, the signals can be readily observed. However, if the line is terminated in an impedance that is not close to the characteristic impedance then it may not be possible to accurately measure the signals.

Руководство по применению 2018-07-03

PDF PDF 1.98 MB
Using Noise Floor Extension in the PXA Signal Analyzer - Application Note
With sufficient processing and other technical innovations, the noise power in a signal analyzer can be modeled and subtracted from measurement results to reduce the effective noise level.

Руководство по применению 2018-07-03

LIV Test of VCSEL for 3D Sensing - Application Note
This application note explains what the challenges on an LIV characterization is, how the Keysight B2900A SMU can overcome them, and show examples to make LIV measurements using the B2900A Series.

Руководство по применению 2018-07-02

PDF PDF 2.31 MB
Noise Figure Measurement Accuracy - The Y-Factor Method - Application Note
Specific to instruments that use the Y-factor method for noise figure measurements, this app note discusses measurement basics, avoidable errors, loss and temperature corrections, and uncertainties.

Руководство по применению 2018-06-29

A Framework for Understanding: Deriving the Radar Range Equation - Application Note
Radar scans three-dimensional space to gather information about detected objects such as location, shape and speed. This entire process is described in this app note by the radar range equation.

Руководство по применению 2018-06-28

On-Wafer Testing of Opto-Electronic Components Using LCA's
This document describes the principles of on-wafer measurements on opto-electronic components

Руководство по применению 2018-06-12

On-Wafer Testing of Opto-Electronic Components
Learn how to achieve accurate on-wafer opto-electronic device measurements and have absolute confidence in your results.

Руководство по применению 2018-06-11

PDF PDF
Wide Range of Resistance Measurement Solutions from µΩ to PΩ - Application Note
This application note introduces keysight's resistance measurement solution, and discuss major error factors in resistance measurements and how to eliminate those error factors.

Руководство по применению 2018-06-06

Simulation for 5G New Radio System Design and Verification
There are many challenges for design and verification engineers to develop their commercial 5G devices. Finding effective solutions is one of the greatest challenges for wireless technology experts.

Руководство по применению 2018-06-06

PDF PDF 5.07 MB
Measuring Insulating Material Resistivity Using the B2985A/87A - Application Note
This application note explains how easy it is to make an resistivity measurement using the B2980A Series.

Руководство по применению 2018-06-05

CX3300 Series Device Current Waveform Analyzer, 7 Hints for Precise Current Measurements
This application note explains 7 hints that can be undertaken in order to obtain more favorable current measurement with the CX3300.

Руководство по применению 2018-06-04

Creating Multi-Emitter Scenarios for Radar and Electronic Warfare (EW) Testing - Application Note
Part 8 of the Radar App Note series focuses on multi-emitter testing of radar and electronic warfare (EW) systems. Realistic testing of these systems depends on the generation of signals that accurately simulate multi-emitter environments consisting of thousands of emitters and millions of pulses per second, all arriving from multiple directions. New technology built into commercial, off-the-shelf signal generators enables developers to generate increasingly complex simulations that get closer to reality and provide deeper confidence in EW system performance.

Руководство по применению 2018-05-31

PDF PDF 1.92 MB

1 2 3 4 5 6 7 8 9 10 ... Следующие